iFi Audio Go Pod
Specifications and features
Overview
The iFi Audio Go Pod fundamentally rethinks the wireless approach for in-ear headphones. This modular system transforms any compatible pair of wired earphones into a high-fidelity True Wireless solution. Unlike conventional wireless earbuds, the Go Pod separates each essential function into a dedicated architecture: Bluetooth reception, digital-to-analog conversion, and amplification. This design preserves the sound signature of your favorite earphones while offering the freedom of wireless listening.
Modular Design and Thoughtful Ergonomics
The system consists of two independent modules that fit comfortably behind each ear. Each pod measures 43.5 x 16.4 x 9.5 mm and features an ergonomic hook covered in a soft polymer. This design ensures a stable fit even during sudden movements, making the device suitable for sports activities.
The outer side of each module features an aluminum touch panel for controlling playback, adjusting volume, managing calls, or activating the voice assistant. IPX5 certification effectively protects against sweat, splashes, and dust.
The charging case, measuring 116 x 76 x 38.5 mm, also serves as a carrying case. It offers two charging methods: traditional USB-C and Qi wireless charging for added convenience.
Separate Audio Architecture and Technical Performance
The Go Pod’s technical approach stands out for its Hi-Fi philosophy applied to portability. Each module houses a Qualcomm QCC5144 Bluetooth chip dedicated exclusively to reception. The signal is then processed by a Cirrus Logic MasterHIFI 32-bit converter, specially selected by iFi for its dynamic sound and low power consumption.
The fully balanced amplification delivers 120 mW at 32 ohms and can reach 4V on 300-ohm loads. This power allows it to efficiently drive a wide range of earphones, from sensitive models to more demanding references.
The system automatically detects the impedance of connected earphones and adjusts its output according to four predefined levels: 16, 32, 64, and 300 ohms. This adaptation ensures optimal performance without wasting energy.
Advanced Connectivity and Broad Compatibility
The Go Pod supports all modern Bluetooth codecs: SBC, AAC, aptX (Classic, HD, Adaptive), LDAC, and LHDC/HWA. LDAC support allows for audio streams up to 96 kHz/24-bit, preserving the resolution of high-definition files.
Snapdragon Sound compatibility optimizes performance with Android devices equipped with Qualcomm processors. Bluetooth 5.2 ensures an extended range of about 10 meters and enhanced connection stability.
Versatility is also expressed through interchangeable connectors. The kit includes 2-Pin 0.78 mm and MMCX adapters. T2, Pentaconn, and A2DC connectors are available separately, allowing the system to be used with virtually any earphones on the market.
Battery Life and Practical Features
Each module contains a 180 mAh battery, offering up to 7 hours of continuous listening. The 1500 mAh case extends total battery life to 35 hours, enough for several days of intensive use.
The built-in microphone uses Qualcomm’s cVc noise reduction technology to optimize voice clarity during calls. This feature is especially useful in noisy environments such as public transport or open offices.
Volume control is analog, preserving audio resolution without digital degradation. This approach maintains signal fidelity throughout the processing chain.
Technical Specifications
Audio Performance and Connectivity
- Audiophile architecture: separate Bluetooth circuits, digital-to-analog converter, and amplifier for optimal sound quality
- Analog volume control: no loss of audio resolution
- Frequency response: 10 Hz – 20 kHz (-3 dB, LDAC)
- Automatic impedance detection: 16 Ω / 32 Ω / 64 Ω / 300 Ω
- Hi-Res Bluetooth: compatible with LDAC, LHDC, aptX Adaptive, aptX, AAC, SBC codecs
- Bluetooth 5.2: extended range, enhanced stability, and Snapdragon Sound certification
- Chipset: Qualcomm QCC5100
- Built-in microphone with noise reduction for clear calls
- Universal compatibility: interchangeable connectors
- Included: 2-Pin 0.78 mm and MMCX
- Optional: T2, Pentaconn, and A2DC
Power and Battery Life
- GO pod battery: 180 mAh
- Up to 7 hours of listening
- Charging case: 1500 mAh
- Up to 35 hours of total battery life
- Qi wireless charging and USB-C
Physical Characteristics
- GO pod dimensions: 43.5 x 16.4 x 9.5 mm
- Case dimensions: 116 x 76 x 38.5 mm
- IPX5 water resistance: sweat and splash resistant
Box Contents
- 2 GO pod modules (left + right)
- 1 charging case
- 1 pair of 2-Pin 0.78 mm hooks
- 1 pair of MMCX hooks
- 1 USB-C cable
Frequently Asked Questions
Which earphones can I use with the Go Pod?
The system works with all earphones equipped with MMCX or 2-Pin 0.78 mm connectors. Optional T2, Pentaconn, and A2DC adapters expand compatibility to virtually all brands on the market.
Does the Go Pod change the sound of my earphones?
The architecture largely preserves the original sound signature of your earphones. Some users report a slight bass boost and subtle warmth in the midrange, but these changes remain discreet.
How does automatic impedance detection work?
The system automatically analyzes the impedance of connected earphones and selects the optimal setting from four levels: 16, 32, 64, and 300 ohms. This adaptation occurs without user intervention.
Is the Go Pod suitable for sports?
IPX5 certification protects against sweat and splashes. The ergonomic hook ensures a stable fit even during intense movement.
Does the Go Pod work with all devices?
Bluetooth 5.2 compatibility ensures operation with modern smartphones, tablets, computers, and audio players. Devices equipped with Snapdragon Sound benefit from additional optimizations.
- Eco-contribution included in the sale price.
- Manufacturer reference: IFI0026
- GTIN / EAN: 5060738786732