Onkyo TX-NR3010 black

“We recommend purchasing Onkyo products only after experiencing an in-store demonstration where the advantages and features of Onkyo products will be explained to you.”

The TX-NR3010, the new benchmark in whole-home multimedia central stations, delivers sound to three rooms, transmits high-resolution video to two screens, and streams audio content via DLNA - all controlled by your iPhone or Android smartphone.

With a total of 11 HDMI ports (including MHL for smartphones), and 11.4-channel pre-outs, your home theater configuration options are limited only by your imagination.

The receiver features Audyssey MultEQ XT32 room correction and three incredible sound expansion systems (DTS Neo, Audyssey DSX, and Dolby Pro Logic IIz), while the combination of Qdeo, HQV, and ISF technology ensures upscaling and calibration of video sources to 4K resolution.

Designed specifically for audiophiles, the TX-NR3010 features a large main transformer, additional transformers for audio and video processing, and separate pre-amplification and amplification blocks.

Audio signal clock oscillations are regulated, then converted to analog by 192 kHz/24-bit D/A converters and VLSC circuits before passing through the 3-stage inverted Darlington circuit. The sound quality is spectacular, and with the differential D/A converter and digital transition processing, the sound is bi-amplified by the front monitors, producing an even higher quality result.

Easy to install and controlled by an HDMI-compatible user interface, this THX Ultra2 Plus certified receiver is waiting to reignite your passion for music and cinema.

• Output Power (6 Ω, 1 kHz, 1% THD, 1 Channel Driven, IEC)
  • Front L/R: 200 W/Channel
  • Center: 200 W
  • Surround L/R: 200 W/Channel
• Dynamic Power
  • 320 W (3 Ω)
  • 270 W (4 Ω)
  • 160 W (8 Ω)
• Isolated Amplifier and Preamplifier Blocks
• Massive High Current Power Supply (H.C.P.S.) Transformer
• Three-Stage Inverted Darlington Circuitry
• WRAT (Wide Range Amplifier Technology)
• Discrete Output Stage Circuitry
• PLL (Phase Locked Loop) Jitter-Cleaning Circuit Technology
• Optimum Gain Volume Control Circuitry

Measurements

• Total Harmonic Distortion: 0.05% (20 Hz–20 kHz, Half Power)
• Damping Factor: 60 (Front, 1 kHz, 8 Ω)
• Input Sensitivity and Impedance: 200 mV/47 kΩ (Line)
• Rated RCA Output Level and Impedance: 1 V/2.2 kΩ (Line Out)
• Maximum RCA Output Level and Impedance: 5.5 V/470 Ω (Line Out)
• Frequency Response: 5 Hz–100 kHz/+1 dB, -3 dB (DSP Bypass)
• Tone Control: ±10 dB, 50 Hz (Bass) ±10 dB, 20 kHz (Treble)
• Signal to Noise Ratio: 110 dB (Line, IHF-A)
• Speaker Impedance: 4 Ω–16 Ω

Features

• THX Ultra2 Plus Certified
• VLSC (Vector Linear Shaping Circuitry) for All Channels
• HQV Vida VHD1900 High-Quality Video Processor
• HDMI Zone 2 Output for HD Video in a Second Room
• Audyssey MultEQ XT32 Room Acoustic Correction
• 11.4 Multichannel Pre-Outs
• Supports Onkyo Remote Apps for iPod touch/iPhone and Android
• HDMI Video Upscaling to 4K Digital Video Format via Qdeo Technology by Marvell
• ISF (Imaging Science Foundation) Video Calibration for Optimal Video Performance
• DTS Neo:X, Audyssey DSX, and Dolby Pro Logic IIz for Extended Surround Channels
• MHL (Mobile High-Definition Link) for Smartphone Content on HDTV
• InstaPrevue Technology for Video Source Preview in PiP Mode
• Internet Radio and Streaming Audio Services Connectivity (Last.fm, MP3tunes, Spotify, AUPEO!, Simfy, vTuner)

Audio

• HDMI Supporting 3D Video, Audio Return Channel (ARC)
• 7 x TI Burr-Brown 192 kHz/24-bit DACs
• Differential N/A Conversion for Front Channels
• 32-bit DSP Chip for Advanced Processing

Connectivity

• 9 HDMI Inputs
• 2 Component Video Inputs
• 5 Composite Video Inputs (1 Front/4 Rear)
• 6 Digital Audio Inputs (3 Optical/3 Coaxial)
• 7 Analog Audio Inputs
• 1 Phono Input
• 1 Analog RGB Video Input (D-Sub 15) for PC
• 1 RI (Remote Interactive) Input
• 1 IR Input/1 IR Output
• 2 HDMI Outputs (1 with ARC)
• 2 USB Ports (Front/Rear) for Flash Memory Devices and iPod/iPhone
• 1 Component Video Output (720p/1080i HD-Capable)
• 1 Composite Video Output
• 1 Zone 2 Composite Video Output
• 2 12 V Trigger Outputs (Zone 2/Zone 3)
• 2 Independent Subwoofer Pre-Outs
• 2 Analog Audio Outputs (Zone 2/Zone 3)
• 11.4 Multichannel Pre-Outs
• 1 RS232 Port
• 1 Ethernet (RJ-45) Port
• Speaker A/B Configuration
• Color-Coded, Banana Plug-Compatible Speaker Posts
• 1 Headphone Jack
• 1 FM Antenna Input
• Compatible with Onkyo UWF-1 Wireless LAN Adapter (via USB)

Tuner

• Reception frequency range
  • FM 87.5 MHz-108 MHz
  • AM 522 kHz- 1,611 kHz, 530 kHz- 1,710 kHz
• FM/AM presets: 40 stations

General

• Power consumption
  • In operation: 1010W
  • In standby: 0.15W
• Dimensions (W x H x D): 435 x 198.5 x 463.5 mm
• Weight: 25 kg

Included accessories

• Indoor FM antenna
• AM loop antenna
• Speaker cable labels
• Speaker calibration microphone
• Instruction manual
• Quick start guide
• Remote control
• 2 AA (R6) batteries