Pro-Ject Pick It 25A
Overview
The Pro-Ject Pick it 25 A is a moving magnet (MM) phono cartridge developed to celebrate the 25th anniversary of the Austrian brand Pro-Ject. Designed in collaboration with the Danish manufacturer Ortofon, it is aimed at vinyl enthusiasts seeking faithful and detailed sound reproduction.
An Anniversary Collaboration for an Exceptional Cartridge
The Pick it 25 A is the result of a partnership between Pro-Ject and Ortofon, two renowned names in the audio industry. Created to commemorate Pro-Ject’s 25th anniversary, this cartridge draws inspiration from the Ortofon OM10 design while incorporating significant enhancements. One standout feature is the use of pure silver coils in the generator, which provides superior dynamics and transparency.
Crystal-Clear Performance Thanks to Pure Silver
One of the key strengths of the Pick it 25 A lies in its pure silver coils. This material choice delivers crystal-clear performance, enabling a more dynamic and detailed sound reproduction. The resulting enhanced transparency allows listeners to discern the subtlest nuances in their vinyl recordings, offering a truly audiophile listening experience.
Versatile Design for Broad Compatibility
The Pick it 25 A is designed to fit a wide range of setups. Its low mass and high compliance make it compatible with most low-mass tonearms. Additionally, its 47 kΩ impedance and comfortable output level of 5.5 mV make it easy to pair with the MM phono inputs of entry-level and mid-range integrated amplifiers.
Technical Features for Demanding Audiophiles
The Pick it 25 A is equipped with an elliptical diamond stylus with a tip radius of 8 x 18 µm. Its frequency response ranges from 20 Hz to 24 kHz, covering the entire audible spectrum with precision. Channel separation exceeding 25 dB at 1 kHz ensures a precise and well-defined stereo image. The recommended tracking force is 1.5 g, with an acceptable range of 1.25 to 1.75 g, allowing fine-tuning to optimize performance.
Balanced and Dynamic Sound
The Pick it 25 A delivers a balanced and dynamic sound reproduction. The pure silver coils contribute to better detail definition and enhanced transparency. Listeners can expect a precise stereo image, well-defined bass, and crystal-clear highs. The cartridge particularly excels in reproducing nuances and sound textures, doing justice to the richness of vinyl recordings.
Elegant Design for Modern Turntables
Available in black and blue, the Pick it 25 A seamlessly integrates with the aesthetics of modern turntables. Its sleek and understated design reflects Pro-Ject’s signature minimalist approach. The cartridge body is engineered for optimal rigidity, contributing to precise playback and reducing unwanted resonances.
Technical Specifications
Construction
- MM (Moving Magnet) cartridge type
- Pure silver coils for more dynamic playback
- Standard 12.7 mm mount
- Replaceable stylus
- Elliptical stylus (8 × 18 µm)
- Weight: 5 g
Audio Performance
- Frequency response: 20 - 24,000 Hz
- Output voltage: 5.5 mV
- Channel separation: > 25 dB at 1 kHz
- Dynamic / lateral compliance: 25 µm / mN
Installation Parameters
- Tracking force range: 1.25 - 1.75 g
- Recommended tracking force: 1.5 g
- Tracking angle: 20°
- Compatible with low to medium mass tonearms
- High tracking ability
Electrical Characteristics
- Internal inductance: 580 mH
- Recommended load impedance: 47 kΩ
- Recommended load capacitance: 200 - 600 pF
- Requires MM (Moving Magnet) phono preamplifier
Frequently Asked Questions
How do I properly install the Pro-Ject Pick it 25 A cartridge on my turntable?
Installing the Pick it 25 A follows standard procedures for MM cartridges. Ensure the cartridge is correctly aligned on the headshell, adhering to the geometry recommended by your turntable manufacturer. Set the tracking force to 1.5 g and check the alignment using a protractor to achieve the best performance.
What is the average lifespan of the Pick it 25 A stylus?
The stylus lifespan depends on several factors, including the quality of your records and frequency of use. Under normal conditions, you can expect a lifespan of 800 to 1000 hours of playback. It is recommended to have the stylus inspected by a professional after approximately 500 hours of use.
Is the Pick it 25 A compatible with all phono preamps?
The Pick it 25 A is designed for use with MM (Moving Magnet) phono preamps. It is compatible with most phono preamps on the market, including those integrated into amplifiers. Just ensure your preamp has an MM input and can handle a 47 kΩ load.
How do I properly clean the Pick it 25 A stylus?
To clean the stylus, use a soft brush specifically designed for phono cartridges. Gently brush from the back to the front of the stylus. For deeper cleaning, you can use a specialized stylus cleaning solution, following the manufacturer’s instructions carefully. Avoid contact with the cartridge’s moving parts.
Can I replace only the stylus on the Pick it 25 A?
Yes, as with most MM cartridges, it is possible to replace only the stylus on the Pick it 25 A when it wears out. Be sure to purchase a compatible replacement stylus, ideally from Pro-Ject or an authorized dealer, to ensure quality and compatibility.
- Eco-contribution included in the sale price.
- GTIN / EAN: 9120082384643
