Vogel's EPW 6565
Projector wall mount
When the ceiling is too high, sloped or impossible to drill into, the projector can go on the wall. This horizontal-arm mount holds it at the right distance from the wall, adjusts its angle in every direction, then locks it in place. It comes off with a click when the session is over. Its universal interface accommodates almost all models up to 10 kg, and its cables stay hidden along the full height of the wall.

A reversible arm to adjust distance and height
The mount consists of a wall module and a horizontal arm that positions the projector away from the wall. The arm adjusts along two axes. Horizontally, it moves the unit closer to or farther from the wall according to its size and the required projection distance. Vertically, it adjusts the height so that the lens faces the centre of the screen. This second adjustment matters more than it might seem: a projector aligned at the correct height needs less digital keystone correction, which eats into the image resolution.
The arm is also reversible. Fitted one way, it holds the projector upright above it. Turned over, it suspends it upside down underneath. The choice depends on the installation height: above the arm when the mount is fitted fairly low, underneath when it is positioned near the ceiling. The wall module stays the same in both cases.
Ball joint, tilt and roll to align the image
The interface that holds the projector is mounted on a spherical hinge, a ball joint with a wide range of movement. It rotates through 360°, tilts up to 20° upwards or downwards and allows 20° of roll. Roll is rotation around the lens axis: it straightens an image that leans to one side, a common problem when the wall or screen is not perfectly plumb.
Once the image is aligned, the Adjust & Lock function locks the ball joint in position. The projector no longer moves when you handle it, plug in a cable or when the fan runs for hours. The image stays in the same place from one session to the next.
A projector that comes off in one movement
The projector attaches to the universal interface, which adapts to the mounting points on almost all models up to 10 kg. The horizontal arm and the unit then detach from the wall module with a simple click, without unscrewing anything. You can then put the projector away between sessions, take it to another room or lend it out for an evening, then put it back without readjusting it.
This quick-release connection is part of the Fix & Change system from Vogel’s. The projector interface also slots onto the brand’s other modules, on the ceiling or on a table. If the mount remains accessible in a room people pass through, a universal padlock, sold separately, locks the assembly to prevent theft.
Hidden cables and installation on a solid wall
The HDMI cables and power cables run through the AdvanCIS system, an integrated cable sleeve patented by Vogel’s. It guides them along the mount and conceals them regardless of the installation height, without additional trunking. Once installation is complete, no screws are visible. The silver finish blends with light-coloured walls as well as most projector housings.
The supplied fixings are intended for concrete, solid brick or solid wood walls, with a covering no more than 3 mm thick. A plasterboard or hollow brick partition requires suitable wall plugs: it is best to ask an installer for advice before drilling. The mount is TÜV-certified, and its design has received the Good Industrial Design Award and the iF Product Design Award.
Documentation
French
Technical specifications
Overview and compatibility
- Type: projector wall mount with horizontal arm
- Maximum load: 10 kg
- Compatibility: almost all projectors up to 10 kg with the included universal interface
- Colour: silver
Adjustments and articulation
- Horizontal arm: reversible, position-adjustable on the horizontal and vertical axes
- Projector mounting: upright or upside down thanks to the reversible arm
- Rotation: up to 360°
- Tilt: up to 20°
- Roll: 20°
- Articulation: ball joint
- Locking: Adjust & Secure function
Installation and cable management
- Installation and removal: projector and horizontal arm removable with one click
- Compatible with Vogel’s Fix & Change system
- Cable management: patented AdvanCIS system, routing and concealing cables at any height
- Anti-theft: option to add a universal padlock, not included according to Vogel’s wording “can be fitted”
Included accessories
- Assembly instructions, according to the contents listed by Vogel’s
- Universal projector interface, according to the description
Certification, awards and warranty
- Certification: TÜV
- Awards: Good Industrial Design Award, iF Product Design Award
- Warranty: 10 years
Frequently asked questions
What exactly is included in the box?
The mount comes complete. It includes the EPW 6560 wall module with its horizontal arm, the EPA 6505 universal projector interface, wall mounting hardware and assembly instructions.
Do I need to change a projector setting when it is mounted upside down?
Yes. When suspended beneath the arm, the projector displays an upside-down image. You need to enable “ceiling” or “front inverted” projection mode in its menu, depending on the manufacturer’s terminology. This mode flips the image electronically, without any loss of quality.
Can the same projector be moved from the wall to the ceiling?
Yes, if you also have a Vogel’s ceiling module compatible with the Fixer & Changer system, such as the one on the EPC 6545 mount. The interface attached to the underside of the projector slots into either the wall module or the ceiling module. The device can be moved without adjusting its mounting.
Is the mount suitable for a projector weighing over 10 kg?
No. The maximum load of 10 kg must not be exceeded, even slightly. Most home theater projectors and compact models fall below this limit. Some 4K laser projectors with large lenses exceed it: check the weight listed in your model’s specifications before purchasing.
Is the anti-theft padlock included?
No. The mount is designed to accommodate a universal padlock, sold separately. This is useful in a meeting room, classroom or any room where the projector remains within reach.
Is the stand available in another color?
No. The stand is only available in a silver finish.
- Eco-contribution included in the sale price.
- Manufacturer reference: 8023654
- GTIN / EAN: 8712285311444







