ClearAudio ClearAudio Active black/silver Pack

It is fully assembled and adjusted at the factory. Thanks to its built-in phono preamp and headphone output, you can easily switch from direct headphone listening to listening on your hi-fi system. Its integrated headphone amplification stage will suit most dynamic headphones on the market.

Beneath the elegant, contemporary exterior lies a level of technical sophistication unique to Clearaudio. The Concept’s body is carefully crafted. The top layer of the body incorporates a special high-tech satin plastic compound designed to minimize unwanted resonances.

The DC motor is powered by an external voltage-stabilized power supply and is completely decoupled from the turntable body to avoid any mechanical interference.

• The pack includes:
  • Concept Active TT0056 Black/Silver Turntable
  • Verify TA035C Tonearm
  • Concept V2 MM012 Cartridge

Platine Concept active TT0056

• Analog turntable with internal belt drive
• Decoupled DC motor with low-noise bearing
• Speed: 33 RPM, 45 RPM & 78 RPM
• Anti-resonant aluminum & black chassis
• Bronze platter axis
• POM platter
• Speed variation: +/- 0.04%
• Phono preamp and headphone output

General Specifications

• Power Consumption
  • Max. Consumption: 1.5 Watts
  • Operating Consumption: 0.5 Watts
• Weight: Approx. 7.5 kg
• Dimensions (W x H x D): 420 x 350 x 125 (with tonearm)

Verify TA035C Tonearm

• Frictionless tonearm with magnetic bearing technology
  • With silver aluminum tube
• Cartridge balance range: 2.5 g - 17 g
• Null points:
  • Inner: 66.04
  • Outer: 120.9
• Overhang: 17.31 millimeters
• Wiring:
  • Clearaudio Direct Wire Plus (1.1 m)
  • Terminated with RCA plug
• Pivot to stylus distance: 222 millimeters
• Offset angle: 25.54°
• Tilt angle: 0.123° / cm
• Average skating factor: 0.43
• Effective tonearm length: 9.4 inches (exactly 239.31 mm)
• Total length: 302 millimeters
• Mounting style: Clearaudio (bore diameter 24.85 mm)
• Total weight:
  • 300 grams
  • 430 grams (including counterweight)

Concept V2 MM012 Cartridge

• Moving magnet cartridge
• Cartridge mass: 8.6 g (+/-0.2g)
• Frequency response: 20 Hz - 20 kHz
• Output voltage (1KHZ, 5cm/s): 3.3mV
• Channel separation (1 KHZ): 20 dB
• Channel balance (1 KHZ): 2dB
• Tracking ability: 80 μm
• Recommended tracking force: 2.2 g ± 0.3 g
• Coil impedance (1 KHZ): 0.66 kΩ
• Coil inductance: 400mH
• Load resistance: 47 kΩ
• Load capacitance: 100pF
• Cantilever / stylus shape: Aluminum / elliptical
• Compliance: 15 μ / mN
• Cartridge body: Aluminum