Perlisten A2s (pack of 2)

The Perlisten A2s is the brand’s entry-level model for speakers dedicated to effects channels. Designed for multichannel applications, this compact speaker features a 35 mm composite Teteron tweeter mounted in a custom waveguide and a 215 mm carbon fiber woofer. It’s engineered for flexible installation: the speaker can be mounted on a wall or ceiling using an articulated bracket, allowing precise placement for side, rear, or height channels.

The A Series: an accessible, no-compromise approach

The A Series is Perlisten’s most accessible range, launched in 2025. This line draws inspiration from the acclaimed S and R series, bringing the same commitment to engineering and design to a more versatile offering. Perlisten has adapted technologies similar to those in its high-end ranges to create a more affordable option without sacrificing engineering principles.

Unlike the S and R series, which use the DPC (Directivity Pattern Control) system with multiple domes in a vertical configuration, the A Series employs a newly developed waveguide paired with the 35 mm Teteron tweeter to achieve wide dispersion and low distortion. The series includes four models: the floorstanders A4t and A3t, the compact monitor A3m, and the A2s surround speaker.

Construction and custom drivers

The 35 mm composite Teteron tweeter is mounted in a custom waveguide that controls dispersion and enhances imaging across the listening area. This tweeter is an evolution of the one used in the R Series, but with a polyester dome rather than silk. Teteron is a high-strength polyester, similar to the synthetic fabric used for parachutes, chosen for its light weight and durability.

The waveguide is more than just an aesthetic element: it has been precisely shaped to control how sound radiates from the tweeter, maintaining consistent tonal balance over a wider listening area. Note that the waveguide protrudes slightly over the mid/bass woofer, helping the speaker approximate a point source.

Low frequencies are handled by a 215 mm carbon fiber woofer. Carbon fiber offers an excellent stiffness-to-mass ratio, enabling fast transient response while limiting cone deformation. The speaker uses a shallow cabinet specifically designed for flexible installation, with the drivers angled downward, making it suitable for mounting on side or rear walls, ideally near the ceiling.

Mounting and system integration

The speaker includes mounting points for direct installation, or it can be installed on an optional articulated bracket that offers numerous positioning options. This bracket, made by IsoAcoustics, allows precise aiming of the speaker—an asset for Dolby Atmos or DTS:X configurations where each channel must be directed accurately toward the listening area.

This flexibility makes the A2s well-suited to spatial audio setups, where maintaining tonal consistency across all channels is essential while using compact, easy-to-place speakers. The speaker integrates naturally with other models in the A Series, simplifying the assembly of a coherent home theater system.

The A2s is specifically designed for surround applications, whether for cinema or spatial audio configurations. It is suitable for side, rear, and height channels alike. You can think of the A2s as the Swiss Army knife of surround speakers—an essential component in any serious cinema installation.

Technical specifications

Configuration and transducers

• Speaker type: 2-way, acoustic suspension
• Tweeter: 35 mm, Teteron composite dome, mounted on a unique waveguide
• Woofer: 1 x 215 mm, carbon fiber cone

Acoustic performance

• Sensitivity: 86.8 dB / 2.83 V / 1 m
• Impedance: 6 Ω nominal / 4.5 Ω minimum
• Frequency response: 59 Hz – 30 kHz (-6 dB)
• Typical in-room bass extension: 50 Hz (-6 dB), 41 Hz (-10 dB)
• Maximum sound pressure level at 1 m (100 Hz – 20 kHz): 109.2 dB peak, 109 dB peak with less than 3% second- and third-order harmonics

Dimensions and power

• Dimensions: 45.0 cm H x 28.0 cm W x 22.1 cm D
• Recommended power: 50 – 200 W

Available finishes

• Standard finish: satin black
• Grilles: optional

General information

The A2s is an entry-level surround speaker designed for home theater and immersive audio. Versatile and compact, it can be used as a side, rear, or ceiling speaker.

Highlights:

• Excellent dispersion thanks to the custom tweeter waveguide
• Compatible with other speakers in the A series for a cohesive surround system
• Ideal for movie enthusiasts and multichannel installations
• Designed for wall/ceiling mounting with tilt bracket
• Versatile for any surround position
• Cabinet and crossover optimized for natural, accurate reproduction