Klipsch Flexus Core 300 Wall Mount
Overview
This mount is designed for the Klipsch Flexus Core 200 and Core 300. It is not compatible with the Flexus Core 100 or with other soundbars. For the Core 300, this is the only official wall-mounting solution. For the Core 200, the bracket is an option; this soundbar also comes with standard L-brackets. For a sturdier or more discreet installation than with the supplied brackets, this mount can be used as an alternative.
A design tailored to Flexus soundbars
The mount attaches to the Flexus Core 200 or 300 soundbars using the supplied 1/4”-20 screws. This specific hardware ensures a firm hold on the unit, which weighs around 8.5 kg. The L-shaped structure allows the soundbar to sit flush against the wall while maintaining the correct orientation of the upfiring speakers, which are essential for Dolby Atmos reproduction.
An opening at the rear of the mount allows power and signal cables to pass through, avoiding unsightly exposed wires. This practical detail also makes later adjustments easier if you want to modify your setup or add components to the Flexus system.
Installation suited to common wall structures
A cardboard mounting template is included in the kit. This full-scale pattern makes it much easier to mark drilling points and keep the mount level. A T20 bit is included for screwing, but you’ll need to provide your own Phillips screwdriver.
A minimum of three mounting points is required to ensure a secure installation. This requirement guarantees an even distribution of the soundbar’s weight across the full width of the mount. For concrete, brick, or traditional plaster walls, suitable hardware is not supplied: you will need to purchase appropriate wall plugs separately.
Technical specifications
Compatibility
- Flexus wall mount designed for Core 300 and Core 200 models
- Length: 1424 mm
Frequently Asked Questions
Is the Flexus Wall Mount suitable for the Flexus Core 100?
No, this mount is only compatible with the Core 200 and Core 300 models. The more compact Core 100 has its own built-in wall-mounting system with L-brackets supplied as standard.
Can the mount be installed on a concrete or brick wall?
The mount can technically be attached to these surfaces, but the appropriate hardware (impact anchors, concrete screws) is not included. You will need to obtain fixings that are suitable for your wall material and capable of supporting the total weight.
What is the recommended minimum distance between the soundbar and the TV?
Klipsch does not specify a mandatory minimum distance. However, to optimize how the upfiring speakers project sound towards the ceiling, it is best not to place the soundbar directly under the bottom edge of the TV and instead leave a gap of a few centimeters.
Does the mount allow the soundbar to be tilted?
No, this mount keeps the soundbar flat against the wall, without any tilt adjustment. This fixed orientation is suitable for most setups, as the Core 300’s speakers are designed to operate horizontally.
- Eco-contribution included in the sale price.
- Manufacturer reference: 1073663
- GTIN / EAN: 743878092318
