ArtSound RE2080 (pack of 2)
Overview
Two years of development for an in‑wall speaker that visually disappears while standing out acoustically. The RE2080 model represents the top of ArtSound’s Intiimi range — a Finnish name meaning “purity,” chosen to reflect the philosophy of this Belgian series. With its three‑way design and ultra‑thin grille, this rectangular speaker is designed to provide sound in spaces of up to 50 m² without imposing its presence on the décor.
One‑piece construction to limit resonances
The structural originality of the RE2080 lies in its integrated design: the front plate and chassis are molded from a single piece of ABS. This approach, less common in the in‑wall speaker segment, is intended to reduce unwanted vibrations and resonances that can color the sound. The rectangular enclosure measures 360 × 255 × 100 mm and weighs 2.2 kg per speaker, dimensions that allow installation either in a wall or in a ceiling.
The metal grille deserves particular attention: at only 1 mm thick with a visible frame of less than 5 mm, it virtually disappears once installed. Its fine mesh ensures optimal acoustic dispersion while protecting the drivers from dust. ArtSound also offers the option of painting it to match the color of the surrounding wall or ceiling.
Three‑way design with adjustable tweeter and midrange
The acoustic system of the RE2080 stands out for its three dedicated transducers. The 8‑inch (20 cm) woofer uses a neodymium magnet, known for its favorable power‑to‑weight ratio, to reproduce low frequencies from 48 Hz. The 2‑inch (5 cm) midrange driver uses a titanium diaphragm, a rigid and lightweight material that promotes precision in the vocal range. Finally, the 1‑inch dome tweeter also combines neodymium and titanium and benefits from a suspension patented by ArtSound.
The technical originality lies in integrating the tweeter and midrange into a shared adjustable housing. This configuration allows you to direct the mid and high frequencies toward the listening area, a valuable flexibility when the speaker cannot be positioned directly facing the listeners. The 90 dB sensitivity and variable impedance from 4 to 8 ohms make the RE2080 compatible with most hi‑fi or home theater amplifiers, provided the recommended power range of 40 to 160 watts is respected.
Active filtering and tone control
Behind the grille is a discreet tone control, accessible via copper‑colored knobs. This system allows you to adjust the treble and midrange levels independently to tailor the sound to the room’s acoustics or your listening preferences. ArtSound also integrates a dual filtering system: a crossover that distributes the signal across the three drivers according to their frequency range, and an equalization filter that fine‑tunes the overall response curve. This combination is designed to maintain a coherent tonal balance regardless of volume level or content type.
Installation and additional accessories
The cutout required to recess the RE2080 is 335 × 230 mm, an operation that can be carried out in standard plasterboard with the appropriate tools. ArtSound offers several accessories to optimize installation: the KITRE4 acoustic kit, made of moisture‑resistant MDF, forms a back box that absorbs resonances and isolates the speaker from the cavity behind the wall. The FLKIT RE2080 Flush Mount kit, for its part, allows you to align the grille perfectly with the wall or ceiling surface, eliminating any visible protrusion. A replacement grille is also available separately.
The speaker is equally at home in a traditional stereo setup or as part of a home theater system, where it can serve as a front, surround, or effects speaker. Its ability to cover large areas makes it particularly suitable for generous living spaces — living rooms, open‑plan areas, large open kitchens — rather than smaller rooms where a more compact Intiimi model would be sufficient.
Technical specifications
Acoustic performance
- Frequency response: 48 Hz–20 kHz
- Sensitivity: 90 dB
- Impedance: 4–8 Ω
- Coverage: < 50 m²
Speakers
- 3-way system
- Woofer: 8” neodymium
- Midrange: 2” titanium
- Tweeter: 1” pivoting neodymium titanium dome
Power
- Recommended amplifier power: 40–160 W
Dimensions and installation
- Dimensions (H x W x D): 360 x 255 x 100 mm
- Cutout dimensions (H x W): 335 x 230 mm
- Weight per speaker: 2.2 kg
General information
- Shape: rectangular
- Composition: ABS / metal grille
Frequently Asked Questions
Can the RE2080 be installed in the ceiling instead of the wall?
The speaker is designed for both configurations. The adjustable tweeter and midrange assembly lets you direct sound toward the listening area, whatever the mounting position. The dedicated Flush Mount kit works equally well for wall or ceiling installations.
How do you access the tone controls once the speaker is installed?
The adjustment knobs are on the front side, behind the grille. The grille can be removed easily without tools, giving access to the copper‑colored controls that adjust the treble and midrange levels. The grille then snaps back into place with a gentle push.
What is the difference between this model and the RE2040 and RE2060 in the same range?
The RE2080 is the only three‑way speaker in the rectangular Intiimi series, with an 8‑inch woofer compared with 4 and 6 inches for the RE2040 and RE2060 respectively. It extends lower in frequency (48 Hz versus 55–60 Hz), handles higher power, and covers larger areas. The smaller models retain a two‑way configuration.
- Eco-contribution included in the sale price.
- Manufacturer reference: 00001662
- GTIN / EAN: 5420020102976