Line Magnetic LM-84IA
Line Magnetic LM-84IA, a compact tube integrated amplifier
Twelve watts per channel, two EL84 tubes in push-pull, and a chassis that fits on the corner of a cabinet: that is the proposition of this integrated amplifier from Line Magnetic. The Chinese manufacturer, known for its replicas of Western Electric electronics, applies its expertise here to a compact format. Hand wiring, hand-selected tubes, and dedicated transformers make up an amplifier at ease with sensitive speakers in small rooms.
EL84 push-pull and its twelve watts
The EL84 tube is a power pentode that appeared in the 1950s, appreciated for its warm midrange and harmonic richness. Mounted in push-pull, two tubes work in phase opposition per channel, which increases the available power and tightens the bass compared with a single-ended design. Result: 12 watts per channel in class AB, a modest figure on paper but sufficient with high-efficiency speakers.
The trade-off is evident in the choice of speakers. Below about 90 dB sensitivity, or in a large room, these 12 watts show their limits on dynamic passages. Paired with sensitive floorstanding or bookshelf speakers, in a reasonably sized living room or an office, the amplifier regains some headroom and lets the character of the tubes come through.
Hand-wired construction
Line Magnetic builds its devices without printed circuit boards: each connection is soldered point to point, by hand, a method inherited from the restoration of vintage electronics. The tubes are hand-selected and matched, both the EL84 power tubes and the 12AX7 and 12AU7 input tubes.
The power supply is based on a toroidal transformer with a Z11 core, while two Japanese EI-type output transformers ensure wide bandwidth. These elements are encapsulated and installed separately on the chassis to limit interference between them. The volume potentiometer comes from ALPS, the internal connections use silver-plated cable, and the RCA jacks are designed by the manufacturer to reduce signal loss.
Two inputs, headphones, and a subwoofer
Two line inputs share the rear panel, labeled CD and Line. The expected level is standard (250 mV input sensitivity), which assumes an already amplified source: CD player, converter, or external phono preamp for vinyl, since the amplifier has neither a digital section nor a phono stage.
The front panel includes a headphone output, convenient for late listening without turning on the speakers. A subwoofer output makes it possible to add a subwoofer, a welcome addition when the bass from 12 watts lacks foundation in a large room. Volume is controlled with the supplied remote, and a soft-start circuit with a 30-second delay protects the components at power-on.
A compact and dense chassis
At 360 mm wide for 13.75 kg, the amplifier packs notable mass into a reduced volume: the transformers and chokes explain this weight. The footprint remains modest (160 mm deep), while the 290 mm height is explained by the tubes and transformers mounted on top. Enough to place it on a conventional hi-fi cabinet or a desk, provided some space is left above it.
Like any tube device, it heats up during operation and requires good ventilation. It is better to keep it away from a heat source and avoid confining it in a closed rack. A few minutes of warm-up are necessary before the sound stabilizes.
Changing the sound with tubes
The three tube references used are among the most common, which opens the door to “tube rolling,” the practice of changing tubes to alter the sound signature. The EL84 power tube accepts equivalents such as the 6P14 or 6BQ5. On the input side, the 12AX7 shares its base with the ECC83, E83CC, CV4004, or 5751, and the 12AU7 with the ECC82, 5814, or CV4003.
This compatibility has a concrete advantage: EL84 tubes remain affordable and easy to find, far from the prices reached by directly heated triodes such as the 300B or the 845. A set of new or old-stock (NOS) tubes makes it possible to adjust the rendering to suit your tastes without spending large sums.
Documentation
Technical specifications
Overview
- LM-84IA integrated tube amplifier
- Push-Pull configuration with EL84 tubes
- Class AB operation
- Power output of 2 x 12 W
Architecture and design
- Integrated Class AB stereo amplifier
- EL84 power tubes, hand-selected and matched
- 12AX7 and 12AU7 input tubes, hand-selected and matched
- Specially designed toroidal transformers with Z11 core for the power supply
- Two Japanese EI-type audio-grade output transformers with wide bandwidth
- High-end Japanese ALPS volume potentiometer
- Silver-plated signal cables
Features
- Integrated headphone output for headphone listening
- Subwoofer output for connecting an external subwoofer
- Soft-start circuit and 30 s delay for protection of internal components
- Standard volume remote control
- Two inputs for CD and Line sources
Electrical specifications
- Output power: 12 W + 12 W
- Frequency response: 20 Hz – 30 kHz (± 1.5 dB)
- Total harmonic distortion (THD): 1%
- Signal-to-noise ratio (S / N): 87 dB
- Input sensitivity
- Line: 250 mV
- Pre-input: 1000 mV
- Input impedance: 100 kΩ
- Output impedance: 4 Ω, 8 Ω
Dimensions and weight
- Dimensions (W x H x D): 360 x 290 x 160 mm
- Net weight: 13.75 kg
Tubes and equivalents
- EL84 (output power tubes): 6P14, 6BQ5, 611411
- 12AX7 (input tube): 12AX7EH, ECC83, E83CC, CV4004, ECC803, 5751
- 12AU7 (input tubes): 12AU7EH, ECC82, 5814, 6189, CV4003
Included accessories
- 1 LM-84IA amplifier
- 1 remote control (LM-02 model)
- 1 detachable power cord
- 2 fuses
- 1 user manual
Frequently asked questions
Do you need a phono preamp to listen to a turntable?
The amplifier does not include a phono stage. For a turntable, a phono preamp must be inserted between the turntable and the Line input (or CD), unless the turntable already has a built-in preamp. Both inputs expect a line-level signal.
Should tubes be changed in pairs, or can just one be replaced?
In a push-pull configuration, the two power tubes of the same channel work together, so it is better to replace them with matched pairs to maintain balance between channels. Replacement should be done with the tubes cold and the unit unplugged. Line Magnetic supplies its tubes sorted and matched, a useful reference when buying replacements.
What is the lifespan of EL84 tubes?
Power tubes such as the EL84 generally last several thousand hours, while 12AX7 and 12AU7 input tubes last even longer. A drop in dynamics, the onset of hiss, or a loss of definition indicate wear. The lifespan depends on the listening volume and hours of use.
Is the subwoofer output suitable for a powered subwoofer?
Yes. It provides a signal intended for a powered subwoofer, which then applies its own low-pass filtering. It’s a way to extend the bass without overloading the 12 watts, especially in a large room or with compact speakers.
Is the LM-84IA a good choice for getting started with tube amplifiers?
It’s a coherent starting point. The integrated format combines preamplifier and amplifier in a single chassis, EL84 tubes remain affordable, and tube rolling can be learned without major financial risk. The main constraint remains choosing sensitive speakers, which should be anticipated before purchase.
Can you listen at low volume without losing quality?
Low-power tube amplifiers often pay special attention to their first watts, the ones used at moderate volume. The amplifier retains body and clarity at low levels, which suits nearfield or late-night listening. The headphone output takes over when you need to turn it down even further.
- Eco-contribution included in the sale price.





