Power Acoustics Flight dual screen 75/85

Moving two 85-inch televisions from one room to another takes more than an original box and a few blankets. This multi-ply plywood flight case houses two flat screens side by side, separated by a removable wooden divider, with room for their accessories. Mounted on a wheeled base and fitted with eight handles, it serves for transport between events and for storage the rest of the time.

A multi-ply case reinforced with aluminium

The structure is built from multi-ply plywood: thin sheets of wood bonded with alternating grain directions, producing a rigid, impact-resistant case without the weight of an all-metal shell. All edges are protected by aluminium angle profiles, complemented by corner reinforcements. At all eight corners, metal ball corners absorb impacts during handling and provide support for stacking another case on top in a truck or storeroom. The finish combines the black coating of the wood with the silver of the aluminium, the familiar look of stage and event equipment.

Two screens secured in foam, with a divider between them

Inside, each television sits in its own compartment, separated from its neighbour by a removable wooden panel. Dense foam blocks hold the panels in place and absorb transport vibrations, preventing the screens from moving inside the case at every turn.

The 75/85 designation indicates the supported size range. The maximum dimensions per screen are 1912 mm wide, 1165 mm high and 73 mm thick. These measurements apply to a television without its stand or wall mount: the width and height easily accommodate most 85-inch models, while the thickness requires more attention. A thick LED-backlit television, or one whose electronics housing forms a bulge at the back, may exceed 73 mm even if its edges are thin. You therefore need to measure at the screen’s thickest point, not around its edges.

Rolling, lifting, locking: everyday handling

The flight case weighs 85 kg empty, plus the weight of two large televisions. The base with four integrated castors handles most movement on level ground. Two of these castors have brakes, keeping the case stationary in a vehicle during loading or on a slightly sloping surface.

For sections where the castors cannot be used (steps, ramp, tail lift), eight recessed metal handles provide enough grip points for several people to lift the case together. Their recessed mounting prevents them from protruding beyond the case: nothing catches on a door frame, and the cases can be packed edge to edge in a truck. The case is secured by four butterfly latches, rotating catches that fold flat once locked.

With overall dimensions of 2015 × 1255 × 462 mm, the unit remains more compact than two individual cases of the same size. Its 46 cm depth allows it to pass through a standard interior door, but its 1.25 m height warrants checking before booking a van, depending on the usable height of its loading area.

Technical specifications

Capacity and interior layout

• Plywood transport case accommodating 2 flat screens up to 215.9 cm diagonally and all their accessories
• Removable compartment with a wooden board divider
• Dense foam blocks

Construction and protection

• Metal ball corners for protection and stacking
• Aluminium profile edging, corner reinforcements
• 4 butterfly latches
• Black and silver finish

Transport and handling

• 8 recessed metal carrying handles
• Base with 4 integrated castors, including 2 with brakes
• More compact dimensions for easy handling

Dimensions and weight

• Maximum screen dimensions: 1912 × 73 × 1165 mm
• External dimensions (W × H × D): 2015 × 1255 × 462 mm
• Weight: 85 kg