Power Acoustics Flight dual screen 50 MK2

Two televisions to move from a trade show to a conference room, then bring back without a scratch: that’s the job of this multi-ply plywood flight case. It holds two flat screens up to 50 inches secured in firm foam, keeps a compartment for their accessories, and sits on a platform with four castors. This MK2 version has a more compact design and is considerably lighter than its predecessor, making handling less strenuous.

Two 50-inch screens and their accessories in a single case

Each screen can measure up to 1235 mm wide, 900 mm high and 70 mm thick. A 50-inch television with a 16:9 aspect ratio is approximately 1.11 m wide without its stand, leaving room for foam on either side. Thickness requires more attention: most recent LED and OLED screens come in under 70 mm, but some LCD models have a bulging back where the electronics are housed, and this thickest point is what needs to be measured before purchase.

The firm, dense foam resists compression, holds the panels in place and absorbs vibrations during truck transport. A removable wooden board separates off a compartment for stands, cables, remote controls or wall mounts, which travel with the screens instead of getting lost in a separate box. Since the divider is removable, the interior space can be rearranged to suit the equipment being transported.

Multi-ply plywood, ball corners and aluminium angle profiles

Multi-ply plywood layers wood veneers with alternating grain directions, creating rigid walls that withstand impacts and securely hold screws and rivets over time. The edges are protected by aluminium angle profiles and corner reinforcements, where a flight case might hit a door frame or another case during loading.

At all eight corners, metal ball corners round off the most exposed edges and provide support points when several flight cases are stacked in a van or storage room. The lid closes with four recessed butterfly latches: turn the butterfly-shaped handle to lock it, and once folded down, it stays flush with the wall without snagging straps. The case has a black and silver finish.

A wheeled platform to move 65 kg unladen

The flight case weighs 65 kg before the screens are even loaded, compared with 85 kg for the first version. With two 50-inch televisions, which generally weigh between 10 and 16 kg each without their stands, the load approaches 90 kg. The platform with four integrated castors avoids having to carry this weight over long distances: push the case from the unloading dock to the booth, then lock the two braked castors to keep it stationary on a sloping floor or during setup.

For steps, ramps or loading into a vehicle, eight recessed metal handles are positioned around the case, allowing several people to lift it without getting in each other’s way. The external dimensions of 1338 × 972 × 462 mm, including castors, allow it to pass through a standard doorway by rolling the case with its narrowest side facing forward.

Technical specifications

Capacity and interior layout

• Multi-ply plywood transport case accommodating 2 flat-panel displays up to 127 cm diagonally and all their accessories
• Maximum display dimensions: 1235 × 70 × 900 mm
• Removable compartment with a wooden divider
• Dense foam padding

Construction and protection

• Metal ball corners for protection and stacking
• Aluminium profile edging, corner reinforcements
• 4 butterfly latches
• Black and silver finish

Transport and handling

• 8 recessed metal carrying handles
• Base with 4 integrated castors, 2 with brakes
• More compact dimensions for easy handling

Dimensions and weight

• External dimensions (W × H × D): 1338 × 972 × 462 mm
• Weight: 65 kg