Denon AVR-X6200W black

• New features
  • 9.2 channel audio/video amplifier tuner with 205 W per channel
  • 11.2 channel processing, 13.2 channel pre-outs
  • Built-in Wi-Fi with two antennas, built-in Bluetooth
  • 4K/60 Hz pass-through and 4:4:4 resolution, HDR, BT.2020
  • Upscaling of digital and analog video signals up to 4K
  • Dolby Atmos up to 7.1.4 or 9.1.2
  • Support for DTS:X technology
  • Auro-3D, Auromatic (up to 10.1 channels with additional amplifier)
  • Audyssey MultEQ XT32 (Pro ready), Sub EQ and LFC
  • High-resolution audio streaming DSD, FLAC, ALAC and AIFF
  • AirPlay, Spotify Connect and Internet radio
  • Three zones/three sources
  • Front USB input

The AVR-X6200W’s 9 independent amplification channel design combined with 11.2 channel processing and 13.2 channel pre-outs will allow you to enjoy a high-level surround audio experience. The power supply uses DHCT (DENON High Current Transistor) transistors suitable for all speakers on the market. It decodes surround audio formats based on sound movement in Dolby Atmos and DTS:X, and offers an upgrade option to Auro-3D technology.

The AVR-X6200W is ready for the most comprehensive 3D sound. The advanced video section offers Ultra HD 4K pass-through, upscaling and compliance with HDMI version 2.0a and HDCP 2.2 standards. The three HDMI outputs, multi-room/multi-zone functionality and built-in Audyssey MultEQ XT32/LFC technology ensure total flexibility and perfect calibration of your setup. The AVR-X6200W features two antennas for Wi-Fi and Bluetooth, wireless online music services including Spotify Connect, DLNA streaming and TuneIn Internet radio.

• Number of power amplifiers: 9
• Output power:
  • 205 W per channel (into 6 Ω, at 1 kHz, 1% THD, mono)
  • 175 W per channel (into 6 Ω, at 1 kHz, 0.7% THD, stereo)
  • 140 W per channel (into 8 Ω, 20 Hz to 20 kHz, 0.05% THD, stereo)
• D.D.S.C.-HD Digital and AL24 Processing Plus, Denon Link HD
• Audyssey Dynamic Volume for real-time volume adjustment
• Audyssey DynamicEQ for optimized surround effects at low volumes
• 192 kHz/24-bit digital-to-analog converters
• Multi-source/multi-room (second zone and third zone)
• Digital audio transmission for iPod and iPhone (via USB)
• Jitter reducer (undesirable oscillations)
• Separate amplifiers
• Speaker impedance 4 - 16 Ω

Decoding

• DTS HD Master / DTS 5.1 / DTS ES / DTS 96 / 24
• Dolby Digital Plus / Dolby TrueHD / Dolby Digital EX / DPL IIz
• Multichannel stereo

Preamplifier Section

• Input sensitivity/impedance 200 mV / 47 kohms
• Frequency response 10 Hz – 100 kHz — +1, - 3 dB (DIRECT mode)
• Signal-to-noise ratio 102 dB (IHF-A weighted, DIRECT mode)

Connectivity

Inputs

• 8x HDMI (1 front)
• 2x Component
• 5x Composite (video) (1 front)
• 7x Analog audio (1 front)
• 1x Phono (MM)
• 2x Digital optical
• 2x Digital coaxial

Outputs

• 1x Component output
• 2x Composite (video)
• 3x HDMI monitor
• 2-channel pre-out zones 2/3
• 13.2-channel audio pre-out (subwoofer)
• 1x Headphones

Other

• 1x Ethernet
• 1x USB port
• 1x RS-232C
• 1x Remote control in/out
• 1x FM/AM tuner antenna
• 2x Bluetooth/Wi-Fi antenna
• 2x Trigger output

General

• Power supply 230 V AC, 50/60 Hz
• Power consumption
  • Operating: 730 W
  • Standby: 0.1 W
  • CEC standby 0.5 W
• Power consumption without sound output
  • 65 W (ECO mode on)
  • 110 W (ECO mode off)
• Dimensions (W x H x D) 434 x 167 x 383 mm
• Weight 14.1 kg