Skip to content
HomeCineSolutionsFrance
EN
Quote
Contact
Account
Basket
€29
Available on order
Delivery on 27 November 2026 (from €8.90)
Fast delivery: on 25 November 2026
Notify me when it's back in stock

Complementary product

Focal 300 ICW8 Mounting Kit

In a house under construction or a room undergoing renovation, the position of built-in speakers is decided before the ceiling is closed up. This Focal kit attaches to the framing, joists or studs before the plasterboard is installed. It marks the exact position of a 300 ICW8 speaker and prepares its opening, ensuring precise installation without guesswork once the finishing work is complete.

Marking the position before the walls are closed up

A built-in speaker is usually installed in an opening cut afterwards in an existing ceiling or partition wall. On a new construction site, this method has its drawbacks. You need to locate the cable conduit hidden behind the boards, avoid joists or tracks that are no longer visible, and follow the planned layout without any reference marks. The pre-installation kit resolves these issues in advance. It consists of a positioning frame paired with a mounting strip, which is screwed onto the framing before the plasterboard installer arrives. The frame marks the speaker’s position: the plasterboard installer knows where to cut, the electrician knows where to run the cable, and the spacing between multiple speakers remains as specified during the system design.

Dimensions tailored to the 300 ICW8

The frame matches the dimensions of the 300 ICW8 and that model alone: a cut-out diameter of 263 mm, an overall diameter of 299 mm once the speaker and its trim ring are in place, and a mounting depth of 122 mm. This last dimension also determines the clearance needed behind the board, meaning a space free of ventilation ducts, pipes or compressed insulation at the frame’s location. Each size in the 300 range has its own kit, as the diameter varies from one model to another.

As a reminder, the 300 ICW8 is a two-way coaxial speaker. Its 21 cm bass/midrange driver with a Flax cone, made from flax fibre, surrounds an aluminium-magnesium alloy inverted-dome tweeter that can be angled towards the listening area. It can be installed in either a ceiling or a wall, for stereo, multichannel home cinema or the height channels of a Dolby Atmos system.

From structural work to finishing, two installation stages

The kit does not replace the speaker’s mounting system. The 300 ICW8 comes with its own mounting frame and can be installed without tools thanks to Focal’s EQI (Easy Quick Install) system: pivoting tabs press against the back of the board and lock the assembly in place, accommodating ceiling or partition wall thicknesses between 5 and 30 mm. The kit is used earlier, at the framing stage. Once the boards are installed, the opening is cut along the outline of the frame, the cable is already waiting in the opening, and the speaker is fitted after painting, with its round or square magnetic grille.

In an existing ceiling, the kit loses most of its usefulness: cutting the opening directly and using the EQI mounting system is sufficient. It comes into its own in a new build or major renovation, especially when several speakers require precise placement, such as the four height channels of an Atmos installation.

Technical Specifications

Compatibility

  • Speakers: ICW8 300

Dimensions

  • Outer diameter: 299 mm
  • Cutout diameter: 263 mm
  • Cutout depth: 122 mm

Frequently asked questions

Is the kit essential for installing a 300 ICW8?

No. The speaker mounts directly into a cutout using its supplied frame and mounting tabs. The kit is only used when the ceiling or partition wall has not yet been closed up, to mark and prepare the location in advance.

Is one kit needed per speaker?

Yes, the kit is sold individually and is intended for a single speaker. An installation with four 300 ICW8 speakers in the ceiling requires four kits.

Is this kit also compatible with the 300 ICW4 or 300 ICW6?

No. These models have different cutout diameters and each has its own mounting kit. The 300 ICW8 kit is exclusively for the 300 ICW8 speaker.

At what stage of construction should it be installed?

After installing the framing and running the cables, before fitting the plasterboard. Focal recommends always running the cables before installing the speakers: the end of the cable is brought to the frame, ready to be connected during final installation.

What ceiling or partition thickness is compatible?

The 300 ICW8 mounting system accommodates panel thicknesses between 5 and 30 mm, covering standard plasterboard installed in single or double layers.

Can the 300 ICW8 be installed in a bathroom?

Yes. Focal states that the speakers in the 300 range are unaffected by humidity and can be used in a bathroom or kitchen. They are not designed to withstand direct splashes of water.

User reviews

Cyril

Used only as a cutting template in a false BA13 ceiling. Diverted use but ultimately very practical.

Comment from 7 January 2024 — Experience from 28 November 2023

Automatically translated — Show original (French)
Utilisé uniquement comme gabarit de découpe dans un faux plafond BA13. Usage détourné mais au final très pratique.
  • Eco-contribution included in the sale price.
  • Manufacturer reference: FOAIACAIC300000
  • GTIN / EAN: 191561834231
HomeCineSolutions
Loading