Skip to content
HomeCineSolutionsFrance
EN
Quote
Contact
Account
Basket

Bowers & Wilkins CCM664SR

€480
RRP: €499
Available on order
Delivery on 3 December 2026 (free)
Fast delivery: on 1 December 2026
Notify me when it's back in stock
Protect your product
+€49
Extended warranty to 5 years +
Accidental damage cover for 3 yearsWhat are the benefits?

Bowers & Wilkins CCM664SR, stereo in a single ceiling speaker

In a hallway, kitchen or small office, installing two ceiling speakers does not always make sense: space is limited, and no one stands at the listening position between the two. Bowers & Wilkins has brought both stereo channels together in a single 15 cm in-ceiling speaker, and added a switch that also turns it into a surround channel for a home theater system.

Two channels combined in a single cutout

The design is based on a 150 mm bass/midrange driver with dual voice coils. Each coil receives one channel, left or right, and the black woven fiberglass cone combines both signals in the bass range. This is the range where the ear struggles to pinpoint the source of a sound, so the blending of channels goes unnoticed. Positional information comes higher up in the frequency spectrum, and this is where the CCM664SR separates left and right again: two 20 mm soft-dome tweeters, offset from one another on the front baffle, each reproduce one channel.

The result does not offer the soundstage width of a well-spaced pair of speakers, nor is that its purpose. A passageway or small room retains the entire stereo mix: a voice or instrument recorded on just one channel remains audible, whereas it would be lost with a single speaker connected in mono to just one output. Frequency response extends from 48 Hz to 30 kHz at -6 dB, respectable bass for a 15 cm driver installed in a ceiling.

Understanding sensitivity and impedance correctly

The specification sheet lists two sensitivity figures, and the difference is easily explained. When just one channel is powered, the speaker produces 82 dB at 1 m with 2.83 V. When both channels receive the signal, both coils drive the same cone and the level rises to 88 dB, six decibels higher, equivalent to a doubling of sound pressure. Typical stereo music comes closer to this second case, since most of the content is common to both channels.

Each channel has a nominal impedance of 8 Ω, which does not drop below 4 Ω. Bowers & Wilkins recommends an amplifier rated at 25 to 80 W per channel, a range covered by most stereo amplifiers, multiroom zone amplifiers and home theater amplifiers. The CCM664SR connects to both the left and right outputs of the same zone, just like a conventional pair of speakers.

A switch to move from stereo to surround

A two-position selector changes how the speaker operates. In the stereo position, it reproduces the left and right channels as described above. In the surround position, it becomes a surround channel in a home theater system, where the aim is an enveloping sound rather than a source the ear can pinpoint overhead. The rear channels in a living room or dedicated room can then be installed in the ceiling, with no speakers standing on the floor or mounted on the wall.

Quick installation in new builds and renovations alike

The QuickDogs mounting system uses clamps that rotate behind the plasterboard as the screws are tightened, pulling the frame flush against the ceiling. Installation is carried out from inside the room, through a 202 mm diameter cutout. The visible frame measures 240 mm and protrudes just 4 mm from the ceiling. Allow for an installation depth of 133 mm, a dimension to check in a suspended ceiling with a shallow plenum, or near a joist. The assembly weighs 2.2 kg.

Several accessories support installation. The PMK C6 pre-mount kit is fitted before the plasterboard is installed and marks the cutout location in a new build. The BB C6 and BB 165C back boxes enclose the rear of the speaker, while the BB 6C version adds fire protection for ceilings that require it.

Technical Specifications

Installation

  • Two-way in-ceiling speaker
  • QuickDog fasteners for easy installation
  • Stereo/surround selector to adjust speaker operation
  • Power handling: 25 - 80 W (per channel)

Acoustic Components

  • 2 x 20 mm dome tweeters
  • 150 mm black fiberglass mid/bass driver

Audio Performance

  • Frequency response (-6 dB): 48 Hz - 30 kHz
  • Sensitivity:
    • 88 dB (2 active channels)
    • 82 dB per channel
  • Nominal impedance: 8 Ω (4 Ω min.) per channel

Dimensions and Weight

  • Cutout diameter: 202 mm
  • Mounting depth: 133 mm
  • Protrusion thickness: 4 mm
  • Net weight: 2.2 kg

Compatible Accessories

  • Pre-mount kit: PMK C6
  • Mounting enclosures: BB C6, BB 165C
  • Fire-rated back box: BB 6C

Frequently asked questions

What cable is needed for a stereo ceiling speaker?

The CCM664SR receives two channels and therefore requires two pairs of conductors, meaning a four-conductor speaker cable between the amplifier and the ceiling. The cross-sectional area is chosen according to the length: 1.5 mm² is suitable for short distances within a home, while 2.5 mm² is preferable beyond around fifteen metres to limit cable losses.

Why choose a single CCM664SR rather than a pair of in-wall speakers?

A pair remains preferable in a room where you sit down to listen, such as a living room or bedroom, because the spacing between the two speakers creates a stereo soundstage. The CCM664SR has the advantage in spaces where you move around (hallway, entryway, small kitchen, office), where a single cutout is enough and the listener is never positioned at the center of a pair.

Is a back box necessary?

The speaker works without an enclosure, using the space above the suspended ceiling as its volume. A sealed enclosure provides a known, constant volume behind the speaker driver, which stabilizes the bass, and limits sound transmission into the attic or the adjacent room. In a ceiling that must maintain its fire resistance, the fire-rated BB 6C model is the one to choose.

Can multiple CCM664SR units be installed in the same space?

Yes, in a long hallway or a large open room, several speakers distributed across the ceiling play the same music evenly. You then need to check that the amplifier can handle the resulting load, since connecting several 8 Ω speakers in parallel to the same outputs lowers the impedance seen by the amplifier. A multizone amplifier or one output per speaker simplifies the calculation.

When should you use the PMK C6 pre-mounting kit?

On a new build or major renovation, before the plasterboard is installed. The kit is fixed to the framing, the electrician runs the cable to it, then the plasterboard installer cuts an opening at the marked location. The speaker is installed at the end of the project, once painting is complete, without any risk of getting it dirty or damaging it.

Is the speaker suitable for a Dolby Atmos system?

In a surround position, the CCM664SR handles the surround channels of a home theater system. For the height channels of a Dolby Atmos system, the aim is instead to have a precise sound source positioned in front of and behind the listening position, and a pair of mono ceiling speakers remains the most common solution for these channels.

Can the grille be painted?

The grille can be painted to blend in with the ceiling colour. It is best to remove it from the speaker and apply thin coats of paint, preferably with a spray gun, to avoid blocking the perforations.

  • Eco-contribution included in the sale price.
  • Manufacturer reference: FP29610
  • GTIN / EAN: 714346310371
HomeCineSolutions
Loading