Marantz PM7000N golden silver

Discover the PM7000N, the first Marantz Hi-Fi amplifier based on current feedback equipped with HEOS technology. It is the perfect choice for music lovers. The PM7000N includes high-quality audio components, Marantz-developed HDAM modules, a toroidal transformer, and a high-capacity power supply. Stream your favorite tracks and enjoy high-resolution digital audio files (up to 192 kHz/24 bits or DSD5.6). An MM phono input also allows you to listen to your favorite vinyl records.

Digital inputs support PCM audio and decode not only MP3 files but also lossless digital files such as ALAC, FLAC, and WAV up to 24-bit/192 kHz for high-resolution listening. Built-in USB-A and HEOS support 2.8 MHz and 5.6MHz DSD playback. Stream your favorite music wirelessly via AirPlay2 and Bluetooth, and control the amplifier via the HEOS app or with leading voice assistants Apple Siri, Google Assistant, and Amazon Alexa.

High-Quality Components

Marantz has a reputation for choosing the best possible components for its Hi-Fi electronics, and the PM7000N is built with the same performance-focused Hi-Fi approach. Marantz engineers selected and optimized the PM7000N through extensive listening in dedicated Marantz facilities in Europe and Japan, using audio components optimized for high fidelity.

Toroidal Transformer

The toroidal transformer offers several advantages stemming from its efficiency and power capacity. Its shape allows for low levels of electromagnetic radiation and mechanical vibrations, which improves sound quality compared to outdated transformer models you might encounter.

Separate Power Supply for Standby

To reduce power consumption in standby mode, the PM7000N is equipped with two separate power circuits. In standby mode, the digital SMPS power supply is active so the network can wake up the PM7000N. When switching to operating mode, the SMPS power supply is cut off and the toroidal transformer is activated to provide the strong current needed to reproduce the Marantz sound signature.

• Output power (8 ohms) 60 W
• Output power (4 ohms) 80 W
• Frequency response 5 Hz – 100 kHz ±3 dB
• Total harmonic distortion (8 ohms, 20 Hz - 20 kHz) 0.02%
• Damping factor (8 ohms, 20 Hz - 20 kHz) 100 and above
• Input sensitivity: MM 2.0 mV / 47 kΩ
• Signal-to-noise ratio: MM 87 dB (5 mV input, 1 W output)
• Input sensitivity: high level 220 mV/18 kΩ
• Signal-to-noise ratio: high level 115 dB (2 V input, rated output)

Audio

• Channels 2
• Current feedback topology
• MM phono equalizer Op. Amp and FET input stage
• HDAM version HDAM-SA3, SA2
• Power transformer Toroidal
• High-quality audio components
• Customized components
• Symmetrical power supply layout
• Extruded aluminum heat sink
• Shielded case for digital circuitry
• Tone control (bass/treble)
• Source Direct/balance
• Pure modes 3

Connectivity

• Audio inputs 4
• Phono input: MM
• Optical/coaxial 2 / 1
• USB-A 1 (rear)
• Recorder output
• Subwoofer pre-out
• Gold-plated Cinch terminal
• Speaker terminals Marantz SPKT-1+
• Number of terminals 1 pair
• Remote control bus terminal
• Headphone output (front)

Network

• Streaming and multi-room HEOS/network audio streaming
• Compressed formats: MP3/WMA/AAC
• Uncompressed formats: FLAC/ALAC/WAV
• FLAC HD 192/24/WAV 192/24/ALAC 192/24
• DSD audio streaming Up to DSD5.6
• Gapless playback (FLAC, WAV, ALAC, DSD)
• AirPlay2 audio streaming
• Internet radio (TuneIn)
• Spotify Connect, Deezer, TIDAL, Napster, Soundcloud
• Supported voice control agents:
• Alexa/Google Assistant/Siri
• Remote app compatibility (iOS/Android) HEOS
• Ethernet / Wi-Fi (dual/dual band antenna)
• Bluetooth

General

• Metal front panel
• Power consumption 220 W
• Standby consumption (network control on) 4.6 W
• Standby consumption 0.3 W
• Detachable power cord
• Remote control
• System remote control function
• Maximum dimensions (W x D x H) 440 x 379 x 125mm
• Packed dimensions (W x D x H) 547 x 469 x 235mm
• Weight 10.8kg
• Packed weight 12.3kg