Electrocompaniet ECI-80D black

The ECI 80D is our brand new entry-level integrated amplifier. The new ECI 80D delivers 2 x 80 W into 8 Ohms, using an in-house developed Class A/B amplifier. It features a built-in RIAA preamplifier for your LP player (MM cartridge support), two-way HD Bluetooth for streaming from your iOS, Android, Mac or PC device, as well as HD streaming to your high-end headphones. And of course a 5-input DAC (3 Toslink, 2 COAX).

Preamplifier

• Input impedance: 75 kOhms
• Noise floor: <-130dB
• THD + N: <0.002%
• Frequency response (-3 dB): 1 - 150 kHz
• Volume adjustment range: - 110 dB to +15 dB

Output Amplifier

• THD + N: <0.005%
• Output power (into 8 Ohms): 2 x 80W
• Output power (into 4 Ohms): 2 x 150 W
• Damping factor (8 Ohm load): >300
• Frequency response (-3 dB): 1 - 150 kHz
• SNR (input shorted, ref 1W into 8 ohms, A-weighted): 102 dB
• Gain: 25 dB
• Protection: DC, overload, temperature

RIAA PHONO

• Pickup support: moving magnet
• Gain: 40 dB at 1 kHz
• Input impedance: 47 kOhms || 100pF
• RIAA correction accuracy: +/- 0.1 dB, 25-20 kHz
• Subsonic filter: -3 dB at 14 Hz
• THD: <0.001%
• SNR: 83 dB (A-weighted)
• Overload margin: 30 dB at 1 kHz

Headphone Amplifier

• THD + N: <0.001%
• Load impedance single output used: >16 Ohms
• Load impedance both outputs used: >32 Ohms
• Maximum output power (into 16 Ohm load): 0.4 W
• Maximum output voltage swing: +/- 8V peak
• Output impedance: 10 Ohms
• Protection: DC, overload

Streaming

• Optical input: PCM: 44.1 kHz / 16 bit up to 192 kHz / 24 bit
• Coaxial input: PCM: 44.1 kHz / 16 bit up to 192 kHz / 24 bit
• Bluetooth support: BT5.0, A2DP, SBC, AAC, aptX-HD

Connectivity

• Digital inputs: 2 coaxial, 3 optical
• Analog inputs: 2 RCA
• Analog preamplifier output: 1 RCA
• Service port: 1 USB
• 12V trigger: 1 input, 1 output
• Phono MM: 1 RCA
• Headphone outputs: 3.5 mm jack + 6.35 mm jack
• Speaker outputs: 1 pair of binding posts

General

• Dimensions
  • Width: 470 mm
  • Depth: 262 mm
  • Height: 90 mm
• Weight: 8 kg

Power Consumption

• Mains input voltage: 100-240VAC, 50/60Hz, 3A
• Idle (no load or signal): 30 W
• Standby: <0.5 W
• OFF (main switch OFF): 0 W