GigaWatt Pack PF-1e with PowerSync 1.5m

The GigaWatt PowerSync, a basic power cable from the new GigaWatt range, uses OFHC C10100 copper conductors with 5N purity, annealed for a homogeneous structure and optimal conductivity.

The cable includes three 2 mm² conductors insulated with PE. Each conductor contains 10 wires with a diameter of 0.514 mm.

The conductors are protected by a laminated aluminum static shield. Its airtight structure, fully covering the cable, effectively blocks external EMI and RFI noise and prevents internal interference. An additional drain wire is located under the screen.

The whole assembly is surrounded by an outer insulation of GA 70AT03, covered with a nylon braid.

The pack includes:

• 1 PF-1e power strip
• 1.5 m PowerSync cable

Technical Specifications

PowerSync Cable 1.5 m

• Conductors:
  • 3 x 2 mm², high-conductivity oxygen-free copper (OFHC) multi-strand
  • 10 strands (0.514 mm) per conductor
  • Ground wire 7 strands
• Insulation:
  • Polyethylene (PE) dielectric
  • Static shielding with aluminum foil
  • Inner sheath made of polyvinyl chloride (PVC)
  • Outer braided nylon sheath
• Dimensions: Outer diameter Ø 11.5 mm
• Connectors: G-010, G-030 connectors

PF-1e Power Strip

• Construction:
  • Shielded metal casing
  • Wide-track printed circuit board
  • Star distribution
  • Silver soldering
• Safety:
  • Integrated RLC filter
  • Safety shutters on all sockets
  • Operation indicator light

Electrical Specifications

• Maximum power: 3,500 W
• Rated current: 16 A
• Peak current: 13,000 A

Connectivity

• Inputs: 6 x 16 A Schuko sockets, reversible (high or low ground)
• Output: Gigawatt G-040 Schuko, silver-plated contacts

Physical Specifications

• Dimensions: 420 x 75 x 57 mm (L x H x D)
• Weight: 3.05 kg