Vogel's TVM 3665 (OLED)

Swivel wall mount for OLED TVs

An OLED panel is only a few millimetres thick across most of its surface, and this very slim profile does not tolerate rough handling well. This dual-arm mount accommodates OLED TVs from 40 to 77 inches weighing up to 35 kg. It extends them up to 67 cm from the wall and swivels them with a simple push of a finger. Folded back, it keeps the screen less than 6 cm from the wall.

A discreet frame that stays hidden behind the screen

The part attached to the back of the TV, known as the interface frame, features a slim, minimalist design that does not extend beyond the edges of the screen. Viewed from the front or side, the mount disappears behind the panel, preserving the ultra-slim silhouette of OLED TVs. In this respect, the TVM 3665 stands apart from conventional swivel mounts, whose uprights sometimes protrude beyond the sides of the slimmest screens.

The mount attaches to the TV using the VESA standard: the four threaded holes found on the back of almost all flat-screen TVs, with spacing expressed in millimetres. The TVM 3665 supports hole spacings from 200 x 200 to 600 x 400 mm, with screws up to M8, covering the vast majority of OLED TVs on the market. The 100 x 100 and 100 x 200 mm spacings, used for smaller screens, are not supported. Soft pads fit between the frame and the back of the TV to prevent direct contact between the metal and the casing.

Two arms, three pivots and a screen that moves at the touch of a finger

The mount uses two arms articulated around three pivot points, much like a human arm with its shoulder, elbow and wrist. This configuration allows the distance from the wall to vary from 59 mm with the arms folded to 670 mm with the arms extended. The joints feature treated bearings and precision steel shafts, the basis of Vogel’s One-Finger Movement system: one finger is enough to move the screen, without jolts or strain on the panel, and this smooth movement is maintained after years of daily use.

The swivel range reaches 180°, or 90° to either side. The actual angle available depends on the width of the TV: the wider the screen, the closer its edge comes to the wall as it rotates, so a 77-inch TV will have less range than a 48-inch model. Fully extending the arms before turning the screen provides the widest angle. In a living room opening onto a kitchen or dining room, the TV can be turned towards the table during a meal, then returned flat against the wall. The range of movement also makes it easy to reach the connections on the back of the TV to plug in a console or player without taking the screen down.

Horizontal and vertical alignment can be adjusted once the mount has been screwed to the wall. This allows a slightly misplaced drill hole to be corrected without drilling again, and the screen stays perfectly straight even with the arms extended, where the weight of the TV tends to make a less rigid mount sag.

Tilt locked in place by the TiltAnchor system

The screen tilts by up to 20°, which is particularly useful when the TV is installed high up, above a fireplace or a low cabinet, and needs to be angled towards the sofa. OLED panels retain their colours and contrast when viewed at an angle, so only a moderate tilt is often needed. Once the angle is set, the TiltAnchor system locks it in place: the screen no longer tips when swivelled sideways, and simply releasing the lock allows the setting to be changed.

Guided installation from the first hole to the final adjustment

The TVM 3665 comes with everything needed for installation: a wall mounting kit with fischer DuoPower wall plugs, a TV mounting kit, protective pads, a spirit level, a drilling template, an Allen key, clips to bundle cables along the arms and a quick installation guide. Vogel’s DrillRight app, which uses the smartphone camera with augmented reality and includes a spirit level, helps position the first hole at the correct height.

A 35 kg TV extended 67 cm from the wall exerts considerable leverage on the fixings. Installation requires a solid wall (concrete, brick or concrete block) or, in a timber-frame house, the TVA 6950 adapter, which transfers the load to the studs. Several Vogel’s accessories complete the installation: the TVA 6000 cable duct, in black or white, conceals the cables between the wall and the TV, the anthracite TVA 6301 rear cover hides the wall plate, and the SOUND 3550 mount holds a soundbar weighing up to 6.5 kg beneath the screen, following its every movement.

Proven strength and a quantified environmental footprint

The mount carries TÜV certification, issued by an independent testing organisation, and has been tested at up to three times its maximum load, or more than 100 kg. Vogel’s provides a 10-year guarantee. It also has an Environmental Product Declaration (EPD): its impact across its entire life cycle is assessed at 19.8 kg CO₂ equivalent, and 98% of its materials are recyclable.

Technical specifications

Type and compatibility

• Type: dual-arm full-motion TV wall mount (Full-Motion+)
• Colour: black
• Screen size: 101.6 to 195.6 cm
• Maximum TV weight: 35 kg
• Supported VESA mounting patterns: 200 × 200, 200 × 300, 300 × 200, 300 × 300, 400 × 200, 400 × 300, 400 × 400, 500 × 200, 500 × 300, 500 × 400, 600 × 200, 600 × 300, 600 × 400 mm
  • Maximum VESA: 600 × 400 mm
  • Unsupported mounting patterns: 100 × 100, 100 × 200 mm
• OLED-specific feature: slim interface frame with a minimalist design and no protruding edges (Vogel’s data)

Swivel and adjustments

• Swivel: up to 180°, with the actual angle depending on the width of the TV
• Tilt: up to 20°
• Number of pivot points: 3
• Movement system: One-Finger Movement
• Tilt lock: TiltAnchor system
• Levelling adjustment: horizontal and vertical, possible after mounting on the wall

Certifications, strength and warranty

• Certifications: TÜV, EPD
• Load test: tested up to three times the maximum load (Vogel’s data)
• Warranty: 10 years

Environmental specifications

• Environmental impact: 19.8 kg CO₂ eq.
• Recyclability rate: 98%

Included contents and installation assistance

• Wall mount
• Cable clips for cable management
• Wall mounting kit with fischer® DuoPower wall plugs
• TV mounting kit
• Soft protective pads for the back of the TV
• Spirit level
• Quick installation guide
• Drilling template
• Allen key
• Access to the DrillRight app with spirit level

Accessories offered by Vogel’s

• TVA 6000: cable duct, black or white
• TVA 6301: rear cover, anthracite
• TVA 6950: timber stud adapter
• SOUND 3550: soundbar mount for up to 6.5 kg

Dimensions

• Distance from the wall:
  • Minimum: 59 mm
  • Maximum: 670 mm