Vogel's TVS 3695 black

Vogel’s TVS 3695, oak and black steel TV floor stand

Installing a large TV away from a wall, in the middle of an open-plan living room or in a home where drilling is not an option requires a stand that supports itself and still looks good when the screen is off. This Vogel’s floor stand combines a black steel frame with oak cladding, accommodates screens from 40 to 77 inches weighing up to 50 kg, is height-adjustable and swivels with a gentle push of the hand.

A steel frame clad in oak

The TVS 3695 has a black steel frame, ensuring rigidity beneath a large screen, while oak cladding softens the column’s appearance in a living space. This wood is PEFC-certified, a label that guarantees it comes from sustainably managed forests. The stand measures 110 cm high, with a base 84.2 cm wide and 55.4 cm deep: a footprint wide enough to keep a 77-inch screen stable, which needs to be factored into the room layout.

The stand is TÜV-certified. This independent German testing body checks the product’s strength and stability under load, an important consideration in a home with children or pets, since a screen on a floor stand remains more exposed to knocks than a wall-mounted screen.

Manually adjustable height and orientation

The screen height can be adjusted over a range of around twenty centimetres, even after the TV has been installed. This allows you to position the centre of the picture at eye level when seated on the sofa, or raise it if the stand is behind a coffee table or console table.

The screen swivels through up to 90°, with 45° to the left and 45° to the right, around a single pivot point on the column. The OneFinger Movement mechanism from Vogel’s makes this movement smooth enough to turn the screen with just one finger: angle the picture towards the dining table during a meal, then turn it back towards the sofa for the evening. The rotation is horizontal, covering most needs in a living room where seating is arranged around the screen.

VESA compatibility and choosing a TV

The mount follows the VESA standard, which defines the spacing between the threaded holes on the back of TVs. The TVS 3695 supports all mounting patterns from 100 x 100 mm to 600 x 400 mm, covering the vast majority of 40- to 77-inch flat-screen TVs on the market. The mounting interface measures up to 66 cm wide by 43 cm high, and the maximum load is 50 kg: enough to accommodate a 77-inch OLED or LCD TV, provided you check the TV’s weight without its original stand, a more useful indicator than screen size.

The supplied mounting kit includes the screws and hardware needed for the various mounting patterns. Protective pads fit between the mounting interface and the back of the screen to prevent scratches and clamping marks during installation and use.

Cables that follow the column

The back of the stand incorporates cable routing: power, HDMI and aerial cables run down the column to the floor, held in place by clips. This is an important detail for a stand often placed in the middle of a room, where the back of the TV is visible from several positions. You will still need to allow enough cable length for the screen to swivel without pulling on the connectors.

Technical specifications

Stand type and compatibility

• Product type: freestanding, floor-standing TV stand, no drilling required
• Compatible screen size: 102 to 196 cm
• Maximum load: 50 kg
• Universal VESA compatibility: 100 × 100 mm to 600 × 400 mm
  • Horizontal hole spacing: 100 to 600 mm
  • Vertical hole spacing: 100 to 400 mm
  • Hole spacings listed by the manufacturer: 100 × 100 mm, 100 × 200 mm, 200 × 100 mm, 200 × 200 mm, 200 × 300 mm, 300 × 200 mm, 300 × 300 mm, 400 × 200 mm, 400 × 300 mm, 400 × 400 mm, 500 × 200 mm, 500 × 300 mm, 500 × 400 mm, 600 × 200 mm, 600 × 300 mm, 600 × 400 mm
• Mounting interface:
  • Maximum height: 430 mm
  • Maximum width: 660 mm

Rotation and height adjustment

• Rotation: up to 90°, OneFinger Movement
• Number of pivot points: 1
• Adjustable height, even when the TV is mounted
• Height adjustment range: not found in the manufacturer’s documentation

Materials and finishes

• Materials: oak wood and steel, PEFC-certified
• Available colours: oak and black steel, oak and white steel

Cable management

• Integrated cable management: routing through the notch at the rear of the wooden stand

Included accessories and installation

• Included contents:
  • Stand
  • Interface: interface bars and strips
  • 5 cable ties
  • Cover plate
  • TV mounting kit: M6 and M8 bolts in various lengths, washers, 5 and 10 mm spacers
  • TV protection parts
  • Quick installation guide
  • Allen key
• Tools required according to the instructions: large Phillips screwdriver, 4 mm Allen key

Compatible accessories

• Accessories listed by Vogel’s:
  • SOUND 3550: soundbar mount
  • TVA 6301: felt rear cover
  • TVA 6400: media box holder

Certifications and awards

• Certification: TÜV
• Awards: Good Industrial Design Award, iF Product Design Award

Dimensions

• Height: 1100 mm
• Width: 842 mm
• Depth: 554 mm