Cabasse Santorin 25 M3, 25 cm subwoofer
A downward-firing 25 cm driver, 200 W of amplification and a cabinet 42 cm tall: this active subwoofer fills a living room of up to 50 m² with sound, for both home cinema and stereo listening. It succeeds the Santorin 25 M2, retaining its downward-firing design with updated styling featuring two brushed aluminium rings. Its high-level inputs make it compatible with an amplifier without a subwoofer output.
A downward-firing driver for 360° dispersion
The Santorin 25 M3 has no front panel in the usual sense. Its 25S20 driver is mounted underneath the cabinet and fires vertically towards the floor, from which the bass spreads in every direction. Since there is no front to point towards the sofa, the subwoofer is easier to position beside a TV stand, in a corner or along a wall. Bass remains sensitive to room acoustics, and it is worth trying a few positions by ear before choosing the final location.
The 25S20’s cone is made from cellulose fibre. This lightweight, well-damped material was chosen by Cabasse because it withstands high pressures without deforming. Bass stays clean and fast as the volume rises, rather than thickening into a continuous drone during movie effects.
200 W to reach down to 30 Hz
The built-in digital amplifier delivers 200 W of rated power, with peaks of 400 W. The stated frequency response extends from 30 to 160 Hz. At 30 Hz, you are hearing the lowest notes of an organ or the rumble of action soundtracks, a range that compact speakers or small floorstanders cannot reproduce. The maximum level reaches 111 dB: enough to handle an explosion scene at high volume in a 50 m² room without distortion.
The cabinet remains compact for a 25 cm subwoofer, measuring 42 cm tall, 36 cm wide and 38 cm deep. At 17 kg, it can still be moved by one person to test different positions.
Connecting to a home cinema amplifier or stereo system
With a home cinema amplifier, the subwoofer connects via its low-level RCA input to the “Sub” or “LFE” output. This is the most common connection, with the amplifier’s processor then handling bass distribution between the speakers and the subwoofer.
For stereo, there are two possibilities. If the amplifier has a subwoofer output, the same RCA input is all you need. If it does not, which is often the case with integrated hi-fi amplifiers, the Santorin 25 M3 takes the signal through its stereo high-level inputs, wired in parallel to the amplifier’s speaker terminals. Its high-level outputs complete the connectivity.
The upper cutoff frequency is adjustable between 40 and 180 Hz. A high setting suits small satellite speakers with limited bass extension. A low setting suits floorstanders that already reach low, with the subwoofer adding only the bottom octave.
From the Santorin 25 M2 to the M3, styling aligned with the iO3 and Eole 4
The M3 version was released in April 2021. It retains the Santorin 25 formula (downward-firing 25 cm driver, compact cabinet) and mainly updates the styling: a matt paint finish and two brushed aluminium rings encircling the cabinet. Cabasse designed it to match its iO3 and Eole 4 satellite speakers. The brand also pairs the Santorin 25 M3 with these models in 5.1 and 7.1 systems, where it alone handles all the system’s bass.