MartinLogan Motion XT F200 glossy black (pack of 2)

The Motion XT F200 is a floorstanding speaker from MartinLogan’s Motion XT range. This model incorporates advanced technologies and optimized materials to enhance sound reproduction. Its design has been reimagined to deliver faithful and detailed sound reproduction.

A Design Serving Acoustics

The Motion XT F200 features a sleek and elegant silhouette, but don’t be fooled: every aspect of its design has been meticulously studied to optimize its acoustic performance. Standing 128.9 cm tall, 34.9 cm wide, and 41.9 cm deep, this floorstanding speaker commands attention while maintaining harmonious proportions.

One of its major innovations lies in its dual downward-firing bass-reflex system, called “Twin Cannon.” This configuration not only extends the low-frequency response but also offers greater placement flexibility within the room. Unlike traditional rear-firing ports, this system reduces the speaker’s sensitivity to wall proximity.

The front baffle houses the various drivers in an arrangement optimized for phase coherence. Special attention has been given to the cabinet’s rigidity, essential for avoiding unwanted coloration. The speaker’s 39 kg weight reflects the quality of the materials used and the solidity of its construction.

Cutting-Edge Audio Technology

At the heart of the Motion XT F200 is the latest evolution of MartinLogan’s renowned folded ribbon tweeter. Named the Gen2 Obsidian Folded Motion XT, this 3.2 x 6.1 cm driver features a diaphragm with a surface area of 79.8 cm². This large surface, combined with the ribbon’s lightness, enables remarkably precise and airy high-frequency reproduction.

The tweeter is paired with a specific waveguide, the result of extensive simulations and listening tests. This device optimizes sound dispersion and integration with the midrange driver while reducing unwanted reflections.

For midrange frequencies, MartinLogan has developed a 16.5 cm driver using a Kevlar cone reinforced with Nomex. This combination of materials offers an optimal balance between rigidity and internal damping. The result is a natural and detailed reproduction of voices and instruments, free from artificial coloration.

In the bass range, the F200 is equipped with three 20.3 cm aluminum cone woofers. These drivers feature a monobloc cone design and a powerful magnetic motor. Their placement in asymmetrical, non-resonant chambers contributes to clean and well-defined bass frequencies.

Exceptional Sound Performance

The combination of these cutting-edge technologies allows the Motion XT F200 to achieve an exceptional level of performance. Its frequency response ranges from 27 Hz to 25 kHz (±3 dB), covering the entire audible spectrum with remarkable linearity.

The folded ribbon tweeter delivers high frequencies with stunning finesse and precision. The subtlest details are reproduced naturally, without ever becoming harsh. The soundstage benefits from an openness and airiness worthy of the brand’s best electrostatic models.

In the midrange, the Kevlar/Nomex driver excels in reproducing voices and acoustic instruments. The richness of timbres and the accuracy of transients create an almost palpable presence of the artists.

The three aluminum woofers deliver bass that is both deep, articulate, and perfectly controlled. Power is abundant but never at the expense of definition. The use of the “Twin Cannon” bass-reflex system combines deep bass extension with responsiveness.

Versatility and Integration

Despite its high-level performance, the Motion XT F200 demonstrates remarkable versatility. Its sensitivity of 92 dB and nominal impedance of 4 ohms make it compatible with a wide range of amplifiers. MartinLogan recommends power between 20 and 600 watts, providing ample flexibility to adapt to different setups.

The connection terminals, compatible with bi-wiring and bi-amping, offer additional flexibility for audiophiles looking to fine-tune their system. The optimized sound dispersion (45° vertically, 90° horizontally) facilitates integration into various room types.

While the F200 excels in stereo configurations for music listening, it also integrates seamlessly into a high-end home theater system. Its ability to faithfully reproduce the most dynamic effects while maintaining perfect dialogue clarity makes it an excellent choice as a front speaker for discerning cinephiles.

Impeccable Build Quality

True to MartinLogan’s reputation, the Motion XT F200 boasts exemplary build quality. Each speaker is hand-assembled with meticulous care. The available finishes (gloss black, walnut, or satin white) reflect the brand’s attention to detail.

The acoustically transparent grilles are attached via a discreet magnetic system, allowing them to be easily removed to admire the drivers. Their design has been studied to minimize acoustic interference, whether left in place or removed.

A Major Evolution

Compared to the previous generation of the Motion range, the XT F200 represents a significant evolution on all fronts. The folded ribbon tweeter benefits from notable improvements, including an increased diaphragm surface and a more powerful magnetic motor. The midrange/bass system has been completely redesigned, with the introduction of the Kevlar/Nomex cone and new-generation aluminum woofers.

The overall acoustic design has also undergone a complete overhaul. The introduction of the “Twin Cannon” bass-reflex system and the optimization of the tweeter’s waveguide achieve a new level of performance and versatility.

Technical Specifications

Technical Specifications

• Type: floorstanding speaker
• Cabinet: bass-reflex port in the lower position
• Recommended amplifier power: 20 - 600 watts
• Connectors: 5-point terminals compatible with bi-wiring / bi-amplification

Acoustic Performance

• Frequency response: 27 Hz - 25 kHz ± 3 dB
• Dispersion: 45° (vertical) × 90° (horizontal)
• Sensitivity: 92 dB
• Impedance: 4 ohms
• Crossover frequencies: 300 Hz, 2600 Hz (3-way)

Drivers

High-Frequency Driver

• Folded Motion XT Gen2 Obsidian tweeter, 3.2 cm × 6.1 cm
• Diaphragm area: 79.8 cm²

Midrange Driver

• 16.5 cm cone in Kevlar reinforced with Nomex
• Cast aluminum basket
• Non-resonant sealed chamber
• One-piece cone construction

Low-Frequency Drivers

• 3 × 20.3 cm aluminum cones
• Cast aluminum baskets
• Asymmetric non-resonant chamber
• One-piece cone construction

Physical Characteristics

• Dimensions (H × W × D): 128.9 cm × 34.9 cm × 41.9 cm
• Weight: 39 kg
• Finishes: high-gloss black, walnut, satin white