Canton Pro XL.3 white (pack of 2)
Overview
Terrace, poolside, conservatory or bathroom: humid environments require speakers capable of lasting over time without sacrificing sound quality. The Pro XL.3 is the largest model in Canton’s outdoor range. It uses the same bass-reflex design and aluminum drivers that proved their worth on previous generations, while maintaining a discreet footprint of 15 × 23.5 × 15.5 cm for 2.1 kg.
A design made for demanding environments
The Pro XL.3’s enclosure is impact-resistant and protected against moisture. Canton does not specify an exact IP rating, but states that the speaker can handle humid environments: covered terraces, poolside areas, bathrooms. It is not designed for direct, prolonged exposure to rain.
The supplied mounting kit is worth a closer look. The wall bracket supports three installation modes: horizontal, vertical, or angled. Once installed, the speaker can swivel about 90° to either side from its central position, making it easy to aim toward the listening area. Canton also includes a safety cable to prevent accidental falls, as well as the necessary screws and wall plugs.
The protective grille is removable. It conceals the drivers without significantly altering the sound, and protects the cones from splashes.
Two-way design with a 130 mm aluminum woofer
The Pro XL.3 is a two-way speaker. The 130 mm woofer uses an aluminum cone with a Wave (corrugated) surround, a technique Canton employs on several of its ranges to improve excursion and power handling. The 25 mm tweeter is a soft fabric dome.
The crossover operates at 2,700 Hz. This relatively high crossover frequency for a 25 mm tweeter allows the woofer to cover a large portion of the midrange, contributing to coherent vocal reproduction.
In terms of power, Canton specifies 60 W continuous and 120 W peak. The sensitivity of 88 dB/W/m is respectable for a compact speaker: with a typical home amplifier (50 to 100 W), the output is sufficient to cover a medium-sized terrace. The 8-ohm impedance makes the Pro XL.3 compatible with virtually all hi-fi and home theater amplifiers on the market.
The stated frequency response ranges from 40 Hz to 26,000 Hz. The bass extension is relatively deep for this size, but be aware: the 40 Hz figure comes from the manufacturer, with no indication of the attenuation at that frequency. In practice, low-end extension is limited by the cabinet volume.
Listening impressions: convincing mids, bass to keep an eye on
Voices, both female and male, benefit from a warm reproduction given the compact size. High frequencies remain smooth, with no metallic harshness. On acoustic music or lightly compressed recordings, the Pro XL.3 delivers a balanced, pleasant sound.
The limits become apparent when you turn up the volume on tracks with heavy bass content. At high levels, the woofer can saturate, and this distortion can creep into the midrange. This is a common behavior with compact speakers, but it’s worth bearing in mind if you plan to power loud party sessions. Adding a subwoofer relieves the speaker of the most demanding low frequencies and helps avoid this issue.
For ambient outdoor listening or background music in a conservatory, the Pro XL.3 performs its role effortlessly. For more spirited listening with bass-intensive genres (electro, hip-hop, modern rock), adding a subwoofer significantly improves the result.
Documentation
Technical specifications
Power
- Nominal power: 60 watts
- Music power: 120 watts
Acoustics
- Frequency range: 40 Hz – 26000 Hz
- Impedance: 8 ohms
- Acoustic principle: bass-reflex
- Sensitivity (2.83 V / 1 m): 88 dB
- Crossover frequency: 2700 Hz
Drivers
- Tweeter
- Diameter: 25 mm
- Material: aluminum-manganese
- Mid-bass (woofer)
- Diameter: 130 mm
- Material: aluminum
Physical characteristics
- Dimensions (W x H x D): 15 x 23.5 x 15.5 cm
- Weight: 2.1 kg
- Moisture resistant
Connections
- Speaker connection
Included in delivery
- User manual, safety ropes, screws, wall plugs, toothed washers
General information
- Universal speaker for indoor and outdoor use
Frequently Asked Questions
Can the Pro XL.3 stay outside all year round?
No, it is moisture-resistant but not fully waterproof. Canton recommends installing it under cover (covered terrace, awning) or bringing it inside in case of heavy rain. Prolonged exposure to bad weather may damage the components.
Which amplifier should I choose?
A stereo amplifier or home theater receiver delivering between 30 and 100 W into 8 ohms is suitable. The 88 dB sensitivity allows you to reach a good sound level without pushing the amp too hard. A model with bass management makes it easier to integrate a subwoofer if needed.
Can the Pro XL.3 be used as a surround speaker?
Yes, its compact size and wall mounting make it a natural candidate for rear or side channels in a home theater system. Many users employ it in this configuration indoors.
How do I aim the speaker once it’s mounted?
The supplied bracket allows a rotation of about 90° to either side from the central axis. You can adjust the orientation without removing the wall mount.
Can the protective grille be removed?
Yes, it is removable. Taking it off does not significantly change the sound, but exposes the cones to splashes and impacts.
- Eco-contribution included in the sale price.
- Manufacturer reference: 02971
- GTIN / EAN: 4010243029719