Block Axis 700 satin white (pack of 2)

A bookshelf speaker placed on a piece of furniture or a shelf never performs to its full potential: the height is wrong, vibrations are transmitted to the surface, and unwanted resonances build up. A speaker stand solves all three issues at once. At Blok, the accessories brand from Monitor Audio, the Axis range is built around a simple idea: the stand should be acoustically invisible, letting only the speaker be heard.

A stand that contributes to the listening experience

The Axis design follows the Transparent Design Philosophy developed by Monitor Audio, which involves paying as much attention to the supporting furniture as to the electronics themselves. In practice, a good stand serves two functions. It positions the tweeter (the high-frequency driver) at ear level when you are seated — a prerequisite for a proper soundstage and accurate tonal balance. And it isolates the speaker from the floor, preventing cabinet vibrations from travelling through the structure and returning to muddy the sound.

Metal and plywood against vibrations

Each stand combines metal and wood, with a specific role at every level. At the top, a metal plate receives the speaker; it is fitted with rubber pads that create defined contact points and dampen the transfer of vibrations between the cabinet and the stand. In the middle, an extruded metal column forms a tube with a rigid yet lightweight profile. At the bottom, a chamfered plywood base widens the footprint: the broader and heavier the base, the more resistant the assembly is to unwanted movement and resonances. Steel spikes, supplied with the stand, screw into the underside of this base to anchor everything to the floor. Each stand weighs 9.1 kg and has a footprint of 330 x 350 mm.

Setting the height at 700 mm

The 700 designation refers to a 700 mm column, the tallest of the three heights in the range. The right choice depends not on a single rule but on two factors: the size of the speaker and the height of your seated position. The goal is always the same — to bring the tweeter level with your ears once you are settled on the sofa. The more compact the speaker or the lower the seat, the higher the cabinet needs to be raised, and that is where the 700 version makes sense. With spikes and top plate fitted, the stand reaches 747 mm.

Isofill and floor cups

The extruded column is hollow, which lightens the structure and leaves room for a filling: Isofill, a damping material sold separately. These are metal hexagons of varying sizes; slid into the tube, they add mass and damp internal resonances within the column. Bass gains in tightness, and the overall sonic background becomes cleaner. Another option, the Blok Floor Guard cups, made of stainless steel, slip under the spikes. They protect hardwood floors and hard surfaces from spike marks and add an extra layer of isolation.

Satin white or satin black

Axis is available in two finishes. Satin white is paired with a natural ash plywood base, satin black with a black-stained ash base. In both cases, the exposed wood softens the presence of the metal, and the chamfer cut around the edge of the base lightens the visual line at floor level. The piece favours discretion in a living room rather than making a technical statement, without compromising on the rigidity that acoustic performance demands.

Frequently asked questions

Do you need two stands for a pair of speakers?

Yes. One stand supports one speaker, so two are needed for a stereo system. The weight of 9.1 kg and the dimensions given apply to a single stand.

What is included with the Axis 700 on delivery?

The stand comes with its top plate and isolation pads, its column, its base, and the steel spikes to screw into the underside of the base. Isofill and Floor Guard cups are not included and must be purchased separately.

How do you choose between the 500, 600, and 700 mm heights?

Measure the height of your ears when seated in your listening position, then subtract the height of the tweeter measured from the bottom of the speaker. This gives you the stand height that places the tweeter level with your ears. When two heights are close, the shorter one suits taller speakers or higher seats, and the taller one suits compact speakers or low sofas.

Can spikes damage a hardwood floor?

Placed directly, spikes will mark hard floors — that is their purpose: they pierce carpet or press firmly to couple the stand to the floor. On hardwood or tiled floors, Floor Guard cups fit between the spikes and the surface to protect it.

What speakers can be placed on the top plate?

The top plate and its pads are sized for bookshelf speakers and compact desktop models. A floorstanding speaker, which already sits on the floor, does not require this type of stand.

Do both finishes share the same construction?

Yes. Only the colour of the column and the wood of the base differ. The top plate, pads, extruded column, chamfered base, and spikes are identical, as is the acoustic behaviour.

Technical specifications

Design philosophy

• Transparent Design Philosophy: hi-fi furniture designed according to acoustic principles, intended to support each component of the system and optimise its performance
• Blok Axis stands: the result of a collaboration between the design and engineering teams, bringing together several decades of experience to harmoniously combine performance, technology and design
• Objective: to provide a solid, acoustically considered base, allowing the system to operate exactly as intended by its designers

Structure and materials

• Metal top plate with isolation feet
  • Reduces vibrations and resonances
  • Cleaner, more focused sound reproduction
  • Designed to accommodate any bookshelf speaker
• Extruded metal column that can be ballasted
  • Increases stability
  • Dampens unwanted cabinet movement
  • Tighter bass and more precise soundstage
• Chamfered plywood base
  • Firm, extremely rigid base platform
  • Minimises vibrations
  • Improves overall clarity and tonal accuracy

Acoustic damping

• Isofill (optional): filling of the extruded column with unique metal hexagons of different sizes
  • Targeted acoustic damping
  • Reduced resonances and vibrations
  • Tighter, better-controlled bass
  • Cleaner overall sound

Decoupling accessories

• Stainless steel spikes
  • Suitable for soft surfaces
  • Ensure stability
  • Isolate the speaker from vibrations for improved clarity and soundstage
• Blok Floor Guard discs
  • Stainless steel cups placed beneath the spikes
  • Protect the floor
  • Provide an additional layer of isolation, reducing vibrations and preserving sound clarity

Dimensions and weight

• External dimensions with all accessories (H x W x D): 747 x 330 x 350 mm
• Weight (unit): 9.1 kg