Vogel's TVM 3645 black

Dual-arm full-motion TV wall mount

A wall-mounted TV often stays fixed facing the sofa. This Full-Motion+ mount from the Comfort range by Vogel’s extends it up to 67 cm from the wall thanks to two articulated arms: enough to turn it towards the dining table, reposition it in a corner of the room or bring it back almost flat against the wall. It accommodates screens from 40 to 77 inches weighing up to 35 kg and moves with a simple push of a finger.

Two long arms and three pivots to position the screen

The TVM 3645 uses two 67 cm arms connected by three pivot points. Folded, it leaves the back of the TV 59 mm from the wall, a distance close to that of a fixed mount. Extended, it brings the screen 670 mm from the wall, and this reach provides real flexibility in a living room where viewing positions vary.

The swivel range reaches 180°, but the actual angle available depends on the width of the TV: the wider the screen, the sooner its edge touches the wall when swivelled. A 50-inch screen will therefore turn further than a 77-inch screen. The tilt range, totalling 20° (10° forwards, 10° backwards), is mainly useful when the screen is mounted a little high, above a fireplace or a low cabinet, to angle the picture towards eye level and reduce reflections from a window.

One-finger movement that holds its position

The One-Finger Movement system adjusts resistance in the joints so that the TV moves effortlessly with just one finger, then stays where you leave it. The arms do not sag under the screen’s weight and do not require anything to be retightened after each adjustment, which matters in a household where the screen changes orientation several times a day.

The tilt is held in place by the TiltAnchor system. Once the angle is set, the screen does not droop over time, a common problem with mounts whose tilt relies solely on friction.

Guided installation, from the first hole to levelling

The supplied kit covers the complete installation: drilling template, spirit level, Allen key, screws for the wall and TV, and fischer DuoPower wall plugs. These plugs adapt to both solid materials (concrete, solid brick) and hollow materials (hollow brick, plasterboard). The Vogel’s DrillRight app helps mark the position of the first hole using the smartphone’s camera, with a built-in spirit level.

Compatibility is checked using the VESA standard, which is the spacing in millimetres between the four threaded holes on the back of the TV. The TVM 3645 supports sixteen mounting patterns, from 100 x 100 to 600 x 400 mm, covering the vast majority of models from 40 to 77 inches.

Once the TV is mounted, its alignment can be adjusted horizontally and vertically without dismantling everything, avoiding the need to drill new holes for a discrepancy of a few millimetres. Soft pads protect the back of the screen where it touches the mount, and clips keep cables together along the arms.

Accessories to conceal cables or add a soundbar

Vogel’s offers several accessories for this mount. The TVA 6000 cable cover, in black or white, routes cables between the wall socket and the TV, while the TVA 6301 rear cover, in anthracite, conceals the wall plate. For a timber stud wall, the TVA 6950 adapter spreads the mounting points across the studs. Finally, the SOUND 3550 mount attaches a soundbar weighing up to 6.5 kg beneath the TV, allowing it to follow all its movements.

Safety, warranty and environmental footprint

The TVM 3645 is TÜV-certified and has been tested at up to three times its maximum load, or more than 100 kg. Vogel’s provides a 10-year warranty. It has received the Red Dot Product Design Award, iF Product Design Award and Good Industrial Design Award.

The mount has an Environmental Product Declaration (EPD), a standardised document that quantifies its impact across its entire life cycle: 20.2 kg of CO₂ equivalent. It is 98% recyclable. Two colours are available, black and white, best chosen to match the wall rather than the TV, as the wall plate remains visible when the screen is extended.

Technical specifications

Type and compatibility

• Type: dual-arm full-motion TV wall mount (Full-Motion+)
• Colours: black, white
• Compatible screen diagonal: 101.6 to 195.6 cm
• Maximum TV weight: 35 kg
• Supported VESA mounting patterns: 100 × 100, 100 × 200, 200 × 100, 200 × 200, 200 × 300, 300 × 200, 300 × 300, 400 × 200, 400 × 300, 400 × 400, 500 × 200, 500 × 300, 500 × 400, 600 × 200, 600 × 300, 600 × 400 mm
  • Maximum VESA mounting pattern: 600 × 400 mm

Swivel and adjustments

• Swivel: up to 180° (actual angle depends on TV width)
• Tilt: up to 20°
• Number of pivot points: 3
• Movement system: One-Finger Movement
• Tilt lock: TiltAnchor system
• Level adjustment: horizontal and vertical, possible after installation

Certifications, awards and warranty

• Certifications: TÜV, EPD
• Load test: tested up to three times the maximum load (Vogel’s data)
• Awards: Red Dot Product Design Award, iF Product Design Award, Good Industrial Design Award
• Warranty: 10 years

Environmental data

• Environmental impact: 20.2 kg CO₂ eq.
• Recyclability rate: 98%

Included contents and documentation

• Wall mount
• Cable clips for cable management
• Wall mounting kit with fischer® DuoPower wall plugs
• TV mounting kit
• Soft protective pads for the back of the TV
• Spirit level
• Quick installation guide
• Drilling template
• Allen key
• Access to the DrillRight app with spirit level

Accessories offered by Vogel’s

• TVA 6000: cable duct, black or white
• TVA 6301: rear cover, anthracite
• TVA 6950: wood stud adapter
• SOUND 3550: soundbar mount, up to 6.5 kg

Dimensions and wall clearance

• Distance from wall:
  • Minimum: 59 mm
  • Maximum: 670 mm
• Arm length: 67 cm