Skip to content
HomeCineSolutionsFrance
EN
Quote
Contact
Account
Basket

Sugden Audio MasterClass LA-4 titanium

Finish: Titanium
  • Graphite
  • Titanium
€5,650

Caution! Borrowing money costs money.

Available on order
Delivery on 27 November 2026 (free)
Fast delivery: on 25 November 2026
Notify me when it's back in stock
FreeValue €1,290
GigaWatt Powersync ULTRA 1.5 m braided grey mains power cable with Schuko plug and IEC connector
GigaWatt Powersync ULTRA (IEC C15) 1.5m
Protect your product
+€479
Extended warranty to 5 years +
Accidental damage cover for 3 yearsWhat are the benefits?

Sugden MasterClass LA-4, Class A stereo preamplifier

In a separates system, the preamplifier selects the source, adjusts the volume and sends the signal to the power amplifier. This one is hand-assembled by Sugden in Heckmondwike, Yorkshire, and operates in Class A, the operating mode the brand has used since the 1960s. It accepts six analogue sources, can be controlled remotely and can pass through the signal from a home cinema processor without altering it.

Class A on two independent channels

A Class A output stage keeps its transistors conducting continuously, even when no music is playing. The signal never switches from one transistor to another depending on whether it is positive or negative, so the slight distortion that occurs during this transition in conventional circuits is absent here. The trade-off is continuous heat generation: Sugden requires good ventilation, prohibits placing the LA-4 on a power amplifier and advises against stacking other equipment on top of it.

The two channels use a dual-mono design. Each has its own DC-coupled current-feedback gain stages, meaning there are no coupling capacitors in the signal path. These stages are powered by differential current-shunt power supplies: their consumption remains the same regardless of the current demanded by the signal, so the electronics do not experience supply voltage fluctuations during a piano attack or an orchestral tutti. The circuit boards are gold-plated, and Sugden selects the transistors and capacitors fitted in the signal path.

Six inputs, three outputs and a bypass input

On the rear are four RCA line inputs, a recorder input (Tape) and a balanced XLR input. The RCA sockets have Teflon insulators and gold-plated contacts. All switching is handled by relays with gold-plated contacts, which mute the signal during source changes to prevent clicks and unwanted noise.

On the output side, two pairs of RCA sockets operate in parallel: the second can feed a second power amplifier or an active subwoofer. An XLR output caters for power amplifiers with balanced inputs. The recorder output has a fixed level and is controlled by the Record button on the front panel, which has its own indicator light: when pressed, it sends the selected source to the recorder at the same level as the input; when released, it mutes this output.

The bypass input allows hi-fi and home cinema systems to coexist. When the LA-4 is in standby, the source connected to this input is routed directly to the preamplifier outputs at its original level. A processor or AV amplifier can therefore drive the front speakers through the stereo system’s power amplifier, with the processor or AV amplifier controlling the volume. Once the preamplifier is switched on, this input is disconnected.

High gain, motorised volume control

With a 100 mV input, the LA-4 delivers a 1 V output, equivalent to tenfold amplification (20 dB). Its output voltage can reach 10 V, well beyond what is needed to drive any power amplifier to full power. In practice, the volume stays within the first third of its travel: the manual places normal use between the six o’clock position (minimum) and eleven o’clock.

The volume knob is motorised and physically turns when the RC5-compatible remote control is used. The control therefore remains an analogue potentiometer, and its position can be read at a glance on the front panel.

Sugden specifies a frequency response of 15 Hz to 30 kHz within ±0.1 dB, a bandwidth of 6 Hz to 300 kHz, a signal-to-noise ratio and channel separation greater than 90 dB, and distortion below 0.006% at 1 kHz with a 1 V output. A bandwidth extending so far beyond the audible range leaves the upper end of the spectrum intact, with no phase shift in the treble.

Machined front panel and pairings within the MasterClass range

The front panel is cut from a block of machined aluminium and then anodised, while the rest of the case is powder-coated. The LA-4 is available in Graphite and Titanium finishes. Measuring 430 mm wide, 75 mm high and 350 mm deep, it fits on a standard hi-fi rack. The complete package weighs 7 kg.

The LA-4 is the line preamplifier in the MasterClass series, which also includes the SPA-4 stereo power amplifier and MPA-4 monoblocks, all operating in Class A. Sugden also pairs it with power amplifiers from its Sapphire range. The unit has no phono stage, digital-to-analogue converter or headphone output: a turntable connects through a phono preamplifier, such as the PA-4 from the same series, while a network player or CD player connects to a line input.

Technical specifications

Architecture and design

  • High-gain active preamplifier
  • Sophisticated Class A output stage
  • Gold-plated circuit boards
  • Relay switching for all inputs and outputs
  • Specially selected transistors and capacitors
  • Current Shunt Differential power supplies
  • Amplification stages designed to deliver fast transient response and excellent dynamic control

Connectivity

  • Inputs
    • 4 line inputs
    • 1 tape input
    • 1 balanced input (Balanced)
    • 1 bypass input
  • Outputs
    • 2 line outputs
    • 1 fixed tape output
    • 1 balanced output (Balanced)

Features

  • Motorized volume control
  • RC5-compatible remote control
  • Tape output disabling function (Tape Output Defeat)

Audio performance

  • Input sensitivity: 100 mV for 1 V output
  • Maximum output level: 10 V
  • Frequency response: 15 Hz – 30 kHz (± 0.1 dB)
  • Bandwidth: 6 Hz – 300 kHz
  • Signal-to-noise ratio: greater than 90 dB
  • Distortion: less than 0.006% at 1 kHz / 1 V output

Dimensions and weight

  • Dimensions (H × W × D): 75 × 430 × 350 mm
  • Packed weight: 7 kg

Frequently asked questions

Can the LA-4 be connected to an integrated amplifier?

Yes, if the integrated amplifier has a “Main In” or “Power Amp In” input that bypasses its own volume control. With a standard line input, the two volume controls compound each other, the LA-4’s high gain becomes difficult to manage, and some of its benefits are lost.

Which remote control should I use with the LA-4?

RC5 is an infrared protocol developed by Philips and supported by many programmable universal remote controls. It controls the volume, and the motor turns the front-panel knob at the same time.

Balanced or RCA cables to the power amplifier?

For long cable runs, Sugden recommends the balanced XLR connection, which offers better protection against interference. The output wiring follows the standard convention: pin 1 to ground, pin 2 to hot, pin 3 to cold. For a short connection to an amplifier with RCA inputs, the RCA pair is sufficient. Sugden recommends WBT- or Neutrik-type locking plugs.

How do I add a subwoofer?

The second pair of RCA outputs carries the same signal as the first, without filtering. The subwoofer’s low-pass filter sets the frequency at which it takes over, and the main speakers continue to receive the full frequency range.

Where should the preamplifier be placed in the cabinet?

It must be placed on its own on a shelf or in a ventilated cabinet, away from radiators, direct sunlight and moisture. Not on a carpet, not on a power amplifier, and with nothing on top, to keep the ventilation slots clear. A stable, level surface minimises vibrations.

What are the rear switch and standby button for?

The rear switch powers the unit on, and the standby button on the front panel only works when this switch is on. Sugden recommends switching to standby when not listening. The bypass input is also active in this mode: a home cinema system remains available while the stereo section is in standby.

Does the LA-4 support a recorder or a processing loop device?

Yes, thanks to the Tape input/output pair: a recorder, cassette deck or analog signal processor can be connected for two-way operation. The Record button sends the selected source to this device, and you can listen by selecting the Tape input.

  • Eco-contribution included in the sale price.
  • Manufacturer reference: S010T
HomeCineSolutions
Loading