Sendy Audio Apollo Pro
Sendy Audio Apollo Pro, open-back planar magnetic headphones
A 78 mm planar magnetic driver in a pair of headphones weighing 354 grams: that is light for a planar design with wooden earcups. Sendy Audio, the audiophile brand from Chinese manufacturer Sivga, retains the formula of its Apollo, with wood, aluminum and an open back, but changes the driver. The new diaphragm is less than a thousandth of a millimeter thick. The headphones connect to a portable player with a balanced output just as easily as to a desktop amplifier.

A diaphragm less than 800 nanometers thick
In planar magnetic headphones, sound comes from a very thin film placed between magnets. A conductive trace is etched onto this film. When the current from the music signal passes through the trace, the magnetic field moves the entire surface of the film as a single unit. The lighter this film is, the faster it follows changes in the signal and the more abruptly it stops when they cease. Piano attacks and plucked strings retain their definition, and decays fade away without lingering.
On the Apollo Pro, this film is a sandwich-structured nanocomposite diaphragm: several layers assembled together, with a total thickness of less than 800 nanometers. The conductive trace is aluminum. Sendy Audio deposits it using electron-beam evaporation: inside a vacuum chamber, an electron beam vaporizes the metal, which condenses directly onto the diaphragm in a very thin layer. The trace becomes part of the film and adds very little weight.
Magnets surround the diaphragm on either side. With this double-sided arrangement, the magnetic field is the same in front of and behind the diaphragm: it is pushed and pulled with equal force in both directions. Its motion remains more consistent as the volume rises or the bass demands large excursions. Sendy specifies a frequency response of 20 Hz to 40 kHz, extending beyond the upper limit of human hearing.
When it comes to power requirements, the 27-ohm impedance and 93 dB sensitivity place the Apollo Pro among the easy-to-drive planar headphones. A portable player or portable DAC with a 4.4 mm output can drive it to a good listening level. A desktop headphone amplifier retains headroom for the wide volume swings of a symphonic recording or a lightly compressed live performance.

Zebrawood, machined aluminum and 354 grams on your head
The frame is made of aircraft-grade aluminum, machined using computer numerical control (CNC): the parts are cut from solid stock by a computer-controlled machine rather than cast. The earcups are made of zebrawood, an African wood with alternating light and dark grain stripes. Since the grain pattern changes from one piece to another, no two pairs look exactly alike. On each earcup, an aluminum grille with a radial pattern protects the driver and lets the rear sound wave escape.
This open back gives the sound air and width, at the cost of providing no isolation. People nearby can hear the music, and sounds in the room reach your ears. The Apollo Pro is therefore designed for a quiet room, at home or in a private office, not for the train or an open-plan office.
The 354-gram weight matters most over an evening of listening. The headband is padded with lambskin. Its flexible adjustment system lets the headband and earcups position themselves to suit the shape of your head, with no notches to adjust. The earpads are wide and covered in velour: it lets the skin breathe better than synthetic leather, and ears stay cooler after two or three hours.

From the Apollo to the Apollo Pro, a redesigned driver
The first Apollo weighed 395 grams. It used Sendy Audio’s Quad Former technology, which doubles the magnets and windings for better diaphragm control. The Apollo Pro moves to a 78 mm diameter driver, larger than the Apollo’s, with a nanocomposite diaphragm and an electron-beam-deposited trace. It weighs 41 grams less.
The cable changes too. The Apollo’s was made of braided 6N OCC copper, with just one 4.4 to 3.5 mm adapter. The Apollo Pro combines three types of conductors and adds a 6.35 mm adapter. The wood, metal frame and open back that defined the Apollo are retained.

A 4.4 mm balanced cable and two adapters
The supplied cable is 2 meters long. It terminates in a balanced 4.4 mm plug at the source end. With a balanced connection, each earpiece receives its signal through its own pair of conductors, with no shared ground return between the two channels. This connector has become common on portable players, USB DACs and recent headphone amplifiers. Inside, three metals carry the signal: Furukawa OFC copper, silver-plated copper and gold-plated copper. A graphene-reinforced PVC jacket protects them.
Two adapters are supplied for sources without a 4.4 mm output. The first converts the cable to an unbalanced 3.5 mm plug, as used on a laptop, USB-C dongle or console controller. The second converts from 3.5 to 6.35 mm, the large connector found on home amplifiers. They connect end to end to plug the headphones into an amplifier with a 6.35 mm socket. In unbalanced mode, the headphones work normally, but without the channel separation of the balanced connection.
At the headphone end, the cable plugs into a socket beneath each earcup and can be removed completely. A cable that is worn out or too long for portable use can be replaced without modifying the headphones.
Technical specifications
Headphone type
- Open-back over-ear headphones
- Planar magnetic drivers
Drivers
- Diameter: 78 mm
- Diaphragm: nano-composite with a “sandwich” structure
- Magnetic cutting layer less than 800 nm thick, which speeds up response and improves resolution
- Circuit: aluminium deposited on the diaphragm by electron-beam (EB) evaporation
- Deposition effect: dense, uniform coating that precisely controls vibrations, for better separation of sound layers and a more stable frequency response
Acoustic performance
- Frequency response: 20 Hz – 40 kHz
- Sensitivity: 93 dB ± 3 dB
- Impedance: 27 Ω ± 15%
Construction and materials
- Earcups: zebrawood, with a compact acoustic chamber that reduces overall weight
- Grille: ultrafine, lightweight metal mesh with a radiating pattern (“Sunburst”)
- Frame: CNC-machined aircraft-grade aluminium
- Adjustment: flexible system that allows the headband and earcups to adapt naturally to the head
Comfort
- Headband: soft lambskin
- Ear cushions: large and soft, covered in breathable velour to limit heat during long listening sessions
Box contents
- Apollo PRO headphones
- 4.4 mm balanced cable
- Type: detachable, triple composite
- Conductors (all 0.05 mm): 30 strands of Furukawa OFC copper, 10 strands of silver-plated copper, 10 strands of gold-plated enamelled copper
- Shielding: double, with a graphene-reinforced PVC inner layer that isolates the signal from electromagnetic interference and makes the cable more resistant to tension
- Source-side connector: 4.4 mm balanced jack
- Adapters
- Adapter A: 3.5 mm unbalanced to 4.4 mm balanced
- Adapter B: 6.35 mm to 3.5 mm
- Leather carrying case
- Hemp bag
Weight
- Weight: 354 g
Frequently asked questions
Can you listen to the Apollo Pro on a smartphone?
Yes, with an intermediary device, as most smartphones no longer have a headphone jack. A small USB-C converter with a 4.4 mm output connects directly to the original cable and delivers the best results. A dongle with a 3.5 mm output also works with the supplied adapter. The listening level is adequate, with less headroom for loud passages.
Can the headphones be used on public transport or in a shared office?
That’s not its forte. The open-back design lets sound pass in both directions: neighbors hear the music, and ambient noise drowns out quiet passages. The Apollo Pro is made for a quiet room.
Can the cable be replaced with a model of a different length or with a different termination?
Yes, the cable is detachable. A replacement cable must have the same connectors on the headphone end as those located under each earcup. At the source end, it can terminate in 3.5 mm, 6.35 mm or XLR, depending on the amplifier used.
Which cases are included with the headphones?
The headphones come with a leather carrying case, which protects them in a bag or suitcase, and a hemp pouch for storing the cable and the two adapters.
Is the Apollo Pro suitable for movies and gaming?
For movies, yes: the wide soundstage of the open-back design helps position dialogue, music, and effects. For gaming, it plugs into a controller’s 3.5 mm jack using the included adapter. It has no microphone, so you’ll need a separate mic to chat online.
- Eco-contribution included in the sale price.
- Manufacturer reference: SENDY- APOLLO- PR O
- GTIN / EAN: 6973869471097








