Vertere Acoustics DGX: modular, innovative, and upgradeable turntable

The Vertere Acoustics DGX series marks a major evolution of the Dynamic Groove line, combining the British brand’s signature aesthetics with significant technical innovations. Available in three finishes (gloss black, white, and red), this belt-drive turntable offers a modular approach, allowing audiophiles to customize their system according to their needs and budget, with installation possible in under 15 minutes.

A Complete Technical Evolution of the Dynamic Groove Series

Redesigned Chassis and Optimized Suspension

The DGX retains the signature three-layer cast acrylic structure with internal illumination, but all components and their integration have been completely rethought. This sophisticated sandwich construction uses non-resonant cast acrylic to eliminate unwanted vibrations and preserve sound integrity. The transparent central layer is gently illuminated with user-selectable ambient lighting.

The suspension system strategically isolates the sub-chassis from the main chassis, “distancing” the bearing/platter assembly and arm/cartridge from structural components to minimize vibrations. The whole assembly rests on a critically damped steel chassis with three adjustable feet: a rear pillar in acetal and two front pillars in aluminum alloy, all equipped with resistive felt floor interfaces.

The New Groove Runner X Tonearm: Tri-Point Innovation

The Groove Runner X tonearm abandons the wire bearings of previous models in favor of the tri-point articulated bearing system from the SG-1 series. This design uses three captive silicon nitride balls with a precisely machined, non-magnetic bearing point, adjustable in VTA (vertical tracking angle).

Composed of two solidly assembled five-layer flat plates, this arm avoids the high-Q resonance issues of conventional tubes. The internal wiring now uses Vertere Pulse technology with Vertere gold-plated connectors, detachable from the bearing pillar to allow complete removal of the arm for transport.

Reference Motorization Derived from the RG-1

The DGX’s advanced motor system incorporates a programmable microprocessor with a digital-to-analog converter to provide low-distortion sine and cosine waves. These signals are then amplified to the correct level by two balanced bridge amplifiers to control every movement of the motor.

The low-voltage synchronous AC motor is individually “tuned” for the lowest noise by adjusting the microprocessor controls during manufacturing. Copper foil shielding and a stainless steel cover protect against incoming and outgoing interference.

High-Precision Drive System and Platter

Optimized Platter and Interface

The platter is driven via a precision-machined aluminum alloy pulley on the motor and a custom silicone rubber drive belt for smoothness and durability. Electronic speed change (33.3 and 45 rpm with ±0.2% accuracy) via a switch at the rear of the plinth’s top plate eliminates any belt handling.

The platter itself is precision-machined aluminum alloy, with a PETG record interface mat bonded on top. Underneath, a bonded aluminum alloy disc controls platter resonance, while a bonded cork/neoprene/nitrile disc protects the acrylic plinth from accidental damage.

Ultra-Precise Main Bearing

The platter fits onto a super-polished stainless steel spindle resting on a precision tungsten carbide ball in the high-tolerance DGX main bearing housing. The complete bearing assembly is long-term lubricated for longevity and ease of use, avoiding the need for regular bearing lubricant refills.

Precision Controls and Adjustments

Counterweight and Anti-Skate System

The main non-magnetic stainless steel counterweight includes a captive, easily adjustable azimuth fine-tuning screw with friction lock and end weight. A small front stainless steel counterweight allows fine adjustment of tracking force and arm/cartridge resonance tuning.

The anti-skate system uses an adjustable stainless steel weight/wire, progressive across the entire record. The custom Vertere isolated static lift/lower system completes the set with a magnetic arm rest support.

Selectable Audio Output and Grounding

The DGX features Vertere gold-plated RCA output sockets with selectable shielding: signal, chassis, and floating. This flexibility allows the setup to be optimized according to the installation environment and user preferences.

Advanced Power Supply and Connectivity

Dedicated DC-2 Power Supply

The DGX comes with the new dedicated Vertere DC-2 desktop power supply, 30V DC, with IEC mains input and power cables for UK, EU, US, and AUS. The detachable power cable can be upgraded to the Redline AC power cable for enhanced performance.

Easy Installation and Transport

With its streamlined factory installation packages, the DGX can be unpacked, installed, and ready to deliver an exceptional listening experience in under 15 minutes. All standard adjustments (VTA, tracking force, anti-skate, and azimuth) are factory preset for packages with a mounted cartridge.

The new Groove Runner X arm offers maximum convenience and protection: easily removable and safely stored in the included packaging, combined with secure transport screws, the DGX can be transported with confidence and reinstalled in 10 minutes.

System Modularity and Scalability

The Five Configurations of the DG X Range

Upgradeable Platform

The DGX is designed to evolve with the user’s musical preferences. Starting from its premium base package, it offers a range of upgrade options: moving to higher-grade cartridges, upgrading to superior output interconnects and power cables. Each upgrade elevates performance, enhancing resolution, dynamics, and background noise reduction.

Elegant Dust Cover

The design is completed by an elegantly formed, tinted, non-resonant acrylic dust cover that fits neatly onto integrated hinges, creating a modern, streamlined profile that complements the overall elegance of the turntable’s appearance, with minimal impact on sound quality performance.

Positioning and Design Philosophy

Despite its understated appearance, this turntable stands up to much more expensive equipment, thanks to build and sound quality that reflect the rigor of its engineering. Its motor, the heart of the system, directly powers the signal produced by the cartridge. Every component has been designed and optimized to ensure top-level performance.

The DGX, the latest addition to the Dynamic Groove range, doesn’t just perfect an existing formula. It redefines how the elements of a high-end turntable interact with each other.

More than just a record player, the DGX is a true precision instrument. It brings out the finest musical details while offering simple, intuitive use, so the listener can fully focus on what matters most: the music.