Vertere Acoustics Raw DGX red pack

The DGX Raw Pack from Vertere Acoustics is a turntable from the Dynamic Groove series. It incorporates certain technologies borrowed from the flagship RG-1 model, offering sound reproduction quality close to that of high-end systems. Equipped with the new Groove Runner X tonearm and a redesigned chassis, the DGX combines technical performance and ease of use within its category.

Technical Heritage and Positioning in the Range

The DGX stands as the direct heir to the DG-1, while marking a significant technological leap. Vertere has drawn on the expertise developed for its reference RG-1 model to design a turntable that transcends the usual compromises of its price range. This “trickle-down technology” approach makes innovations accessible that are typically reserved for systems several times more expensive.

The DGX’s position within the Vertere ecosystem illustrates the brand’s philosophy: each model benefits from advances developed for the higher-end ranges. This strategy ensures sonic consistency across all Dynamic Groove models, while offering a natural upgrade path for audiophiles looking to move up the ladder.

Motor Innovations and Signal Generation

At the heart of the DGX is its motor system, borrowed and adapted from the RG-1 model. A programmable microprocessor generates the precise sine and cosine waveforms required for the constant rotation of the synchronous motor. This digital approach eliminates the speed variations typical of conventional systems, ensuring faithful reproduction of pitch and musical dynamics.

The digitally generated signals then feed two balanced bridge amplifiers that drive the low-voltage motor. This bridge architecture doubles the available power while reducing distortion and background noise. The motor itself is shielded by a copper sheet and firmly mounted in the steel chassis, mechanically isolating parasitic vibrations.

Drive is provided by a machined aluminum pulley and a silicone rubber belt, materials chosen for their acoustic neutrality and durability. Speed selection between 33 and 45 rpm is handled electronically via a button on the rear, eliminating the traditional manual belt adjustment.

Anti-Resonance Chassis Architecture

The DGX features a three-layer acrylic architecture with an isolated sub-chassis, designed to effectively decouple the motor and tonearm from external vibrations. This multi-layer construction creates successive barriers against parasitic resonances that degrade the sound quality of conventional turntables.

The main damped steel chassis supports the entire assembly while absorbing residual vibrations. Three adjustable feet allow for precise leveling, a solution preferred over traditional four-point supports for its superior mechanical stability. This three-point base also makes installation easier on uneven surfaces.

The machined aluminum alloy platter rests on a stainless steel spindle equipped with a tungsten carbide ball bearing. This combination of materials ensures perfectly smooth and silent rotation, a prerequisite for accurate playback. The platter surface features a bonded PETG resonance control disc, topped with a cork and neoprene mat that optimizes coupling with the vinyl.

Groove Runner X Tonearm Revolution

The Groove Runner X tonearm breaks with convention by adopting a flat profile rather than the traditional tubular structure. This design eliminates the high-frequency resonances typical of tubular arms, which usually require complex and sometimes counterproductive damping.

The arm beam uses a five-layer non-resonant sandwich construction, paired with Vertere Pulse internal wiring to carry the signal from the cartridge. This approach ensures signal transmission free from coloration, revealing every nuance of the original recording.

The Tri-Point bearing system, borrowed from the higher-end SG-1 arm, replaces the thread bearings of the previous model. This evolution improves cartridge support rigidity and increases the arm-cartridge assembly’s responsiveness to groove modulations. The adjustable bearing point allows for precise vertical tracking angle (VTA) adjustment to optimize performance according to the cartridge used.

A remarkable feature of the Groove Runner X is its removable design. The entire arm can be detached from the bearing pillar for safe transport, while retaining all geometry and cartridge alignment settings. This unique feature greatly facilitates moving the turntable without compromising meticulous adjustments.

Ease of Installation and Use

The DGX redefines installation standards in its category, with setup possible in under 15 minutes. This speed is due to factory pre-configured packages that eliminate the complex adjustments usually required on audiophile turntables.

The removable Groove Runner X arm is a major asset for transport. Safely stored in its original packaging and secured with the supplied transit screws, it allows the turntable to be moved without risk of damage. Reinstallation automatically preserves all geometry settings, making the system immediately operational.

This user-friendly approach sacrifices nothing in terms of performance, demonstrating that technical excellence and ease of use are not mutually exclusive. The streamlined user interface appeals to both newcomers and seasoned audiophiles, removing the traditional barriers to entry for high-end vinyl.

Modularity and System Upgradability

The DGX’s modular philosophy allows for progressive upgrades according to needs and budget. The Raw pack includes the turntable with the Groove Runner X arm, DC-2 power supply, ground wire, Technomat, and standard power cable, providing a solid foundation for customization.

This tiered package approach naturally guides users toward successive improvements: a cartridge tailored to musical preferences, higher-quality interconnect cables, refined power supply. Each upgrade brings audible benefits in resolution, dynamics, and background noise reduction.

Upgradability extends to Vertere’s future technological developments, as the DGX is designed to accommodate upcoming innovations in arms and cartridges. This investment longevity sets the turntable apart from products locked into their original configuration.

Technical Specifications

Drive System

• Belt drive
• Low-voltage AC synchronous motor, ultra-quiet
• Programmable microprocessor control
• Speeds: 33.3 and 45 rpm (± 0.2%), electronic selection

Platter and Structure

• Machined aluminum platter with PETG mat
• Vibration reduction system with damping discs
• Polished stainless steel spindle, high precision (< 5 microns)
• Main bearing in brass with tungsten carbide ball
• Multi-layer non-resonant acrylic chassis
• Illuminated central base
• Zintec steel frame with resonance control
• 3-point adjustable isolating feet: 1 rear, 2 front

Groove Runner X Tonearm

• Length: 240 mm
• 3-ball silicon nitride bearing system
• Rigid multi-layer aluminum arm
• Adjustable counterweight, azimuth adjustable
• Adjustable thread anti-skate system
• Vertere Pulse gold-plated internal wiring
• Removable arm with precise lift mechanism
• Magnetic arm rest

Power Supply and Connectivity

• External Vertere DC-2 power supply (30 V) included
• Universal mains input: UK, EU, US, AUS
• Detachable power cable compatible with Redline AC
• Gold-plated RCA outputs with selectable shielding and ground

Physical Specifications

• Dimensions: 469 × 384 × 130 mm with dust cover
• Weight: 8.5 kg turntable / 340 g tonearm
• Tinted acrylic dust cover
• Available finishes: gloss black, white, red

Contents and General Information

• Box contents: DGX turntable, DC-2 power supply, Technomat 7 mm, ground wire, standard power cable
• Cartridge not included
• Upgradeable design with replaceable tonearm and cartridge
• Quick setup in under 15 minutes
• Easy transport thanks to removable tonearm
• Intuitive operation accessible to all
• Faithful, detailed, distortion-free sound quality
• Advanced vibration isolation for natural, high-resolution playback