Audio Technica AT-F7

AT-F7 Stereo Moving Coil Phono Cartridge

The AT-F7 cartridge offers high sound quality comparable to more expensive models, providing exceptional value for money that will delight all who appreciate the finesse of analog records.

Neodymium magnet for increased magnetic energy

The neodymium magnet ensures maximum magnetic energy (BHmax = 50[kJ/m3]), and the pure iron cut ensures excellent properties. The assembly concentrates the magnetic field even more efficiently in the air gap where the moving coils operate.

PCOCC used for coils and connection terminals

PCOCC shows no increase in crystal resistance in the current emission direction: audiophiles appreciate the improved sound purity thus obtained.

High-rigidity VC mold, potassium titanate alloy, to reduce superfluous vibrations

The VC mold holding the coils in place is made of a hard synthetic resin containing potassium titanate to further enhance its rigidity. This improvement results in reduced mass and an unprecedented reduction in superfluous vibrations.

Stereo phono cartridge with moving coils, MicroLine stylus

• Material: Aluminum/synthetic resin
• Stylus Size: MicroLine
• Stylus Radii: MicroLine
• Stylus Assembly: Solid diamond stylus, square shank
• Cantilever: Duralumin

Measurements

• Frequency Response: 15 Hz to 50 kHz
• Channel Separation: 30 dB at 1 kHz
• Channel Balance: 0.5 dB (at 1 kHz)
• Output Voltage: 0.3 mV (at 1 kHz, 5 cm/sec)
• Vertical Tracking Angle: 23°
• Vertical Tracking Force: 1.8 to 2.2 g (2.0 g standard)
• Static Compliance: 40 x 10 – 6 cm / dyne
• Dynamic Compliance: 10 x 10 – 6 cm / dyne (100 Hz)
• Coil Material: PCOCC
• Terminal Pins: Copper
• Recommended Load Impedance: 100 Ω minimum
• Coil Impedance: 10 Ω (at 1 kHz)
• DC Resistance: 10 Ohms
• Coil Inductance: 22 µH (at 1 kHz)

General

• Dimensions (W x H x D): 16 x 16.6 x 26.5 mm
• Cartridge Weight: 6.9 g
• Included Accessories:
  • Non-magnetic screwdriver
  • Brush
  • 2 washers
  • 2 nuts
  • 2 mounting screws 13 mm
  • 2 mounting screws 19 mm
  • 1 plastic protector
  • 1 set of PCOCC headshell leads (AT6101)