Denon DCD-800NE silver

Enjoy high-quality sound and accurately reproduced music with the Denon DCD-800NE CD player with built-in USB port. Advanced AL32 Processing Plus, combined with an innovative circuit structure, ensures faithful and true-to-the-original reproduction of recordings. More than just a CD player, the DCD-800NE provides the highest quality audio signal to the amplifier, while the USB port supports high-quality playback up to PCM192/24 and DSD 2.8MHz/5.6MHz.

The anti-vibration design reduces the detrimental effects on audio from the amplifier’s heavy components, delivering sound quality that meets Denon’s standards. And with over 100 years of experience creating audio components, Denon provides high-quality sound that exceeds expectations.

Advanced AL32 Processing Plus

The DCD-800NE is equipped with Advanced AL32 Processing, as well as Denon’s latest analog signal reproduction technology. Advanced AL32 Processing Plus uses data interpolation algorithms supporting high-quality audio sources. The algorithm adds points that should exist before and after large data to smooth the waveform and restore information lost during digital recording. As a result, music reproduction becomes very delicate, without interference, with rich bass expression and faithful reproduction of the original sound. Listen to your favorite songs as the artist intended.

Anti-vibration design for natural sound reproduction

The anti-vibration design reduces the detrimental effects on audio from the amplifier’s heavy components, delivering sound quality that meets Denon’s standards. The transformer is mounted near the bottom of the DCD-800NE and directly above the isolator to prevent unnecessary vibrations. When the transformer is lowered, vibrations around the chassis are reduced to produce a natural sound.

Advanced circuit technology with minimal signal path

The circuit layout of the DCD-800NE has been carefully designed to minimize the signal path as much as possible. Shorter circuits reduce interference between circuits and the left and right channels, thus minimizing side effects on the audio signal. The DCD-800NE’s circuit is therefore clear, highly transparent, and faithful to the original recordings.

By registering your product here, you have the option to extend the manufacturer’s warranty to 3 years

Structure

• Advanced AL32 Processing Plus
• 192 kHz/32-bit digital-to-analog converter
• Master clock design with DAC
• Direct Mechanical Ground Construction
• Original Denon drive mechanism
• Separate power supplies for digital and analog circuits
• Reads USB memory devices (MP3/WMA/AAC/WAV/FLAC/Apple Lossless/AIFF/DSD)

DSD Audio Section (2 channels)

• Playable frequency range: 2 Hz - 100 kHz
• Frequency response: 2 Hz - 50 kHz (-3dB)
• Dynamic range: 108 dB
• Signal-to-noise ratio: 115 dB
• Harmonic distortion: 0.0015%
• Output level: 2.2 V RMS

PCM Audio Section (2 channels)

• Playable frequency range:
  • 2 Hz - 96 kHz (Sampling frequency: 192 kHz)
  • 2 Hz - 20 kHz (Sampling frequency: 44.1 kHz)
• Frequency response:
  • 2 Hz - 50 kHz (-3 dB) (Sampling frequency: 192 kHz)
  • 2 Hz - 20 kHz (Sampling frequency: 44.1 kHz)
• Dynamic range:
  • 108 dB (24 bits)
  • 101 dB (16 bits)
• Signal-to-noise ratio: 115 dB
• Harmonic distortion:
  • 0.0015% (24 bits)
  • 0.0025% (16 bits)
• Output level: 2.2 V RMS

Digital Output:

• Coaxial: 0.5 Vp-p / 75 Ω
• Optical: -15 - -21 dBm

Digital Input

• USB: USB Type A (USB 2.0 high speed)

Connectivity

• 1x RCA analog output
• 1x optical and coaxial digital output
• 1x IR control input and output

General

• Power supply: 230 V AC, 50/60 Hz
• Power consumption: 28 W (standby 0.2 W)
• Dimensions (W x H x D): 434 x 107 x 275 mm
• Weight: 4.5 kg