Cardas HP Clear (2 x 3m) custom

A strong current flows between the amplifier and the speaker, spanning the entire audio band, and every part of the cable affects its transfer: the metal, the insulation, the strand arrangement, the contacts. In the Clear line from Cardas, a manufacturer based in Bandon, Oregon, this cable sits just below the Clear Beyond. It combines the brand’s Matched Propagation conductors with solder-free forged terminals for neutral, highly detailed reproduction.

Strands sized according to the golden ratio

Each conductor is made from Grade 1 oxygen-free copper, 99.9999% pure, divided into numerous strands individually coated with a clear enamel. This Litz wire construction insulates the strands from one another: current cannot pass from one to another, limiting eddy currents and the skin effect, the phenomenon that pushes the signal toward the surface of the metal as frequency rises. The strand diameters, from the thinnest to the thickest, follow the proportions of the golden ratio (1.618). Strands of different diameters do not resonate at the same frequency, so their resonances do not add together. The entire assembly is wound around a Kevlar core that supports the structure and damps mechanical vibrations.

Cardas groups these design choices under the name Matched Propagation, reserved for its high-end lines. The aim is for the signal to travel uniformly through the cable, regardless of which strand it follows, with as little interference from the insulation as possible. The layers of strands are wound in alternating directions (crossfield geometry), so their magnetic fields cancel one another out.

Four conductors in a mirrored arrangement

The cable combines four concentrically wound conductors, two per polarity, in a perfectly mirrored quadriaxial arrangement: positive and negative occupy symmetrical positions, and both poles operate under identical electrical conditions. Antistatic fibers surround the assembly.

This construction brings the conductors closer together, resulting in very low inductance. The treble retains its full extension and the bass remains controlled, even with low-impedance speakers. The trade-off is higher capacitance than that of a cable with widely spaced conductors. With the vast majority of amplifiers, this has no consequences. With the few models that become unstable when faced with a capacitive load, it is best to discuss this before purchasing.

Fluorinated insulation beneath a flexible jacket

Each conductor is wrapped in FEP (fluorinated ethylene propylene) tape, an insulator from the same family as Teflon. These fluorinated polymers store very little electrical energy and release very little, whereas a common insulator such as PVC releases it with a slight delay relative to the signal. On the outside, a thermoplastic rubber (TPR) jacket gives the cable considerable flexibility for a model in this category, making it easier to route behind furniture and reducing strain on the binding posts.

Solder-free terminals forged in Bandon

The Clear is terminated with a choice of copper Cardas banana plugs or spades, forged under a pressure of 10,000 psi (approximately 690 bar) in the Bandon workshop. Forging compacts the strands into the terminal without filler metal: the connection remains copper-to-copper, with no layer of tin between the conductor and the contact. The plating combines silver, an excellent conductor, with a layer of rhodium, a hard metal that resists oxidation and wear from repeated connections. These terminations cannot be disassembled: changing the terminal type requires retermination in a workshop.

This degree of neutrality has its downside. The Clear adds neither warmth nor brightness, reproducing a precise stereo image and a wealth of detail, but corrects nothing. Slightly harsh electronics or a poor recording will be heard just as they are.

Speakers with dual binding posts: use Clear jumpers

Unlike most Cardas speaker cables, and the Clear Reflection positioned just below it in the range, the Clear is not available in a bi-wire version. On a speaker with dual binding posts, the solution is to use Clear Jumpers in place of the original bridging plates. They use the same conductor as the cable and extend the connection to the second set of binding posts without changing technology along the way.

Technical Specifications

Conductors and Materials

• Conductors: 4 x 10.5 AWG OFHC copper (99.9999% pure)
  • Kevlar core
  • Matched propagation technology
• Processing: Litz wires with clear SPN coating
  • Sizes ranging from 41 AWG to 25 AWG according to the golden ratio
• Insulation materials:
  • Inner sheath in FEP tape (fluorinated ethylene propylene)
  • Outer flexible sheath in TPR (thermoplastic rubber)
  • Polytetrafluoroethylene (Teflon)
• Finishes: rhodium, silver plated
• Copper type: oxygen-free copper (OFC)

Construction and Geometry

• Conductor geometry: 4 conductors in concentric winding
  • Surrounded by anti-static fibers
  • Perfect mirror quad-axial configuration
  • Constant ratio according to the golden ratio
• Outer diameter: 17.14 mm
• Dielectric diameter: 15.24 mm

Connectors

• Connector types: Cardas bananas or spades
  • Forged under 10,000 psi in Bandon, Oregon
• Bi-wiring compatibility: not compatible
  • Alternative solution: use Clear Jumpers for this application

Electrical Characteristics

• Inductance: 0.0176 µH / m / loop
• Capacitance: 278 pF / m (double wiring)

Sound Performance

• Sound signature: ultra-transparent and holographic
  • Extremely musical with uncompromising detail
• Recommended use: designed for high-end systems demanding neutrality, musicality, and ultimate precision