Audioquest Irish Red 2m

AudioQuest Irish Red Subwoofer Cable

Connecting a subwoofer to its amplifier may seem trivial, until a low hum creeps into the bass or a long run alongside a power strip starts interfering with the signal. AudioQuest’s subwoofer cable addresses this specific need: carrying a mono LFE signal (the channel dedicated to low-frequency effects) over what is often a considerable distance, shielded from the electrical interference lurking behind a TV cabinet.

The signal path, from core to insulation

Each conductor is a solid strand of copper, plated with 0.5% silver. The solid-core choice is far from incidental: in a stranded cable, the signal jumps from one wire to another, and this interaction degrades performance. A single continuous conductor avoids this. The silver plating promotes surface conduction, where the highest frequencies travel. On an LFE channel limited to low frequencies, this refinement remains subtle; it comes fully into its own if you repurpose the cable for a conventional line-level connection, which its construction allows. The symmetrical coaxial geometry positions the positive and negative conductors identically, with the shielding kept away from the audio path. The insulation is nitrogen-injected foamed polyethylene: the air it traps absorbs very little energy and limits the dielectric losses that blur the signal.

Keeping interference away from ground

Behind a TV cabinet, the subwoofer cable runs alongside power cords and power supplies, sources of radio-frequency and electromagnetic interference. Conventional shielding picks up this interference and then drains it to the system ground, potentially contaminating this reference point that is meant to remain stable. AudioQuest takes a different approach with its metal-layer noise-dissipation system: rather than sending everything to ground, it absorbs and reflects some of the unwanted energy before it reaches the ground plane of your equipment. The background becomes quieter, and the bass stands out more clearly.

Cold-welded, solder-free plugs

The RCA connectors are gold-plated and terminated without a single solder joint. AudioQuest crimps the conductor under very high pressure, creating a mechanical contact known as cold welding. The benefit: it avoids solder tin, whose poor conductivity would otherwise lie in the signal path. The contact remains solid over time, and the plug fits firmly into both the subwoofer input and the amplifier’s subwoofer output.

The ground wire that eliminates hum

An active subwoofer connected to an amplifier or AVR can sometimes produce ground hum, that deep, continuous buzzing caused by a ground loop. The cable includes a simple solution: two small terminals connected to a ground wire. If hum occurs, screw one terminal to the metal chassis of the subwoofer amplifier and the other to that of the source device, and the loop is cleanly closed. Most installations will not need it, but when the problem arises, the solution is already in the box.

Where Irish Red sits in the range

AudioQuest offers its subwoofer cables in an animal-themed series, from the entry-level Black Lab to the more extensively equipped Boxer and Husky models. Irish Red occupies the middle ground: it retains the geometry and shielding principle of the lower models, then raises the material standard with silver-plated conductors and a more refined outer finish. The step up is measured less in flashy specifications than in consistent manufacturing quality.

Technical Specifications

Product Type

• RCA analog audio interconnect cable
• Application: subwoofer / subwoofer output connection
• Use: Hi-Fi, home theater, amplifiers, AVRs, soundbars

Conductors

• Material: silver-plated copper
• Silver content: 0.5%
• Structure: solid conductors
• Technical objective: reduction of distortion caused by strand interactions

Geometry

• Design: symmetrical coaxial
• Identical positive (+) and negative (-) signal conductors
• Shielding separate from the audio path

Insulation

• Material: foamed polyethylene (PE)
• Technology: nitrogen-injected insulation
• Features
  • Low energy absorption
  • Reduced dielectric losses
  • Improved signal stability

Shielding

• Technology: metal-layer noise dissipation system
• Protection against
  • Radio frequency interference (RFI)
  • Electromagnetic interference (EMI)
• Function: limit signal contamination from high-frequency noise

Connectors

• Type: male RCA
• Finish: gold-plated
• Technology: cold-welded terminations
• Advantages
  • High-pressure mechanical contact
  • No traditional soldering

Compatibility

• Active subwoofers with RCA / LFE input
• Amplifiers with subwoofer output
• Audio / video receivers (AVR)
• Home theater and Hi-Fi systems