Audio Technica AT-LP60XBT black

Audio-Technica AT-LP60XBT: automatic Bluetooth turntable

The AT-LP60XBT is a fully automatic belt-drive turntable that combines analog playback with Bluetooth transmission. It features a switchable phono preamplifier, a Dual Moving Magnet cartridge with replaceable stylus, and a Bluetooth transmitter compatible with aptX. Designed for simple setup, it targets users who want to listen to their record collection with minimal adjustments, while retaining the option of a wired connection.

Vinyl without installation hassle

The AT-LP60XBT operates fully automatically. A Start button sets the platter spinning, positions the tonearm at the lead-in groove, and lowers the stylus. At the end of the record, the arm lifts and returns to its rest. A Cue button also lets you manually raise or lower the arm to select a specific passage.

This automation greatly simplifies record handling, especially for those discovering vinyl or who prefer to avoid the delicate movements required by a manual tonearm. The size selector (30 cm or 17 cm) automatically adjusts the drop point of the arm according to the record diameter. The 33⅓ and 45 rpm speeds are changed via a front-panel switch.

Wireless transmission with aptX codec

The built-in Bluetooth module supports the aptX, aptX Adaptive, and SBC codecs. The first two offer significantly better transmission quality than standard SBC, with a bitrate close to CD quality when the receiving device is compatible. Pairing is simple: hold down the Bluetooth button until the LED flashes rapidly, then activate pairing mode on the speaker or headphones. Once connected, the indicator turns solid blue.

Up to eight devices can be stored, allowing quick switching between different listening systems. The range is about ten meters in the absence of obstacles. This flexibility allows for varied setups: turntable in the living room and headphone listening in the next room, or streaming to a portable speaker on the patio in good weather.

Wired output and built-in phono preamp

The wired connection is still available via a 3.5 mm mini-jack output with an included cable to dual RCA. A PHONO/LINE switch on the rear adapts the signal to the destination equipment. In LINE position, the built-in phono preamp applies the RIAA equalization curve and amplifies the signal (150 mV nominal) for direct connection to powered speakers or an amplifier’s auxiliary input. In PHONO position, the preamp is bypassed (2.5 mV nominal) to use a higher-quality external phono stage or the dedicated phono input of a hi-fi amplifier.

The external power adapter performs AC/DC conversion away from the chassis, thus limiting electromagnetic interference that could affect the audio signal. The turntable has no power switch: it goes into standby as soon as no record is spinning and wakes up when the Start button is pressed.

Lightweight design and anti-resonant platter

The plastic chassis keeps total weight down to 2.6 kg, which makes it easy to move but gives a less solid feel than turntables with wood or metal plinths. Grippy feet compensate for the light weight by effectively stabilizing the unit on most surfaces. The compact dimensions (approximately 36 × 37 × 10 cm) allow installation in tight spaces.

The die-cast aluminum platter combined with an anti-resonance mat reduces vibrations transmitted to the record during playback. The belt drive, a common solution at this price level, mechanically isolates the platter from the servo-controlled motor. Speed fluctuations remain below 0.25% (DIN weighted).

Dual Moving Magnet cartridge and replaceable stylus

Audio-Technica equips this turntable with a Dual Moving Magnet cartridge integrated into the headshell. This design simplifies setup: no tracking force, anti-skating, or alignment adjustments are required. The conical ATN3600LC stylus is easy to replace when it wears out. For improved playback, an elliptical ATN3600LE stylus is also available as an option; its finer geometry extracts more detail from the grooves.

The tonearm and its base have been redesigned compared with previous generations to improve tracking and reduce resonances. However, the molded counterweight does not allow adjustment: the system is optimized to work only with the original cartridge. This limitation rules out any upgrade to a higher-performance cartridge, a compromise inherent in the device’s plug-and-play philosophy.

Technical specifications

Type and mechanism

• Fully automatic belt-drive turntable
• Automatic operation: Start / Stop / tonearm lift
• Servo-controlled DC motor

Audio performance

• High-fidelity audio
• Wow and flutter: < 0.25% (WTD) at 3 kHz
• Signal-to-noise ratio: > 50 dB (DIN-B)

Connectivity

• Wireless: Built-in Bluetooth
  • Supported codecs: Qualcomm aptX, aptX Adaptive, SBC
  • Compatible with Bluetooth speakers, Bluetooth headphones, Bluetooth® soundbars
• Wired: detachable 3.5 mm mini-jack to dual RCA cable (included)

Speeds and drive

• Playback speeds: 33 1/3 rpm, 45 rpm
• Belt drive

Cartridge and tonearm

• Dual Moving Magnet cartridge
• Replaceable ATN3600LC stylus
• Optimized tonearm and headshell for improved stability

Preamplification

• Switchable built-in phono preamp (PHONO / LINE)
• PHONO output: 2.5 mV nominal at 1 kHz
• LINE output: 150 mV nominal at 1 kHz
• Phono gain: 36 dB with RIAA equalization

Platter

• Die-cast anti-resonant aluminum
• Integrated anti-resonance mat

Power supply

• Voltage: 115 / 230 V AC, 50 / 60 Hz
• External AC / DC power adapter to reduce noise in the signal

Dimensions and weight

• Dimensions: 359.5 × 97.5 × 373.3 mm
• Weight: 2.6 kg

Included accessories

• 3.5 mm mini-jack to dual RCA cable
• 45 rpm adapter
• Removable dust cover