Canton Townus 100 white (pack of 2)

Canton, a German manufacturer based in the Taunus region since 1972, developed the Townus 100 to meet a simple demand: to offer a floorstanding speaker capable of filling large living spaces without sacrificing finesse. This 3-way bass-reflex model uses the drivers and know-how from the brand’s higher ranges, with an enlarged cabinet volume and two 192 mm woofers.

A design tailored for large rooms

The Townus 100 is 110 cm high, 27 cm wide, and 37 cm deep. These dimensions make it an imposing speaker, but the proportions remain balanced thanks to careful work on the cabinet edges: the corners are rounded, which reduces acoustic diffraction while softening the overall silhouette. The plinth, slightly recessed, creates a visual “floating” effect and incorporates four height-adjustable metal feet to stabilize the speaker on different types of flooring.

The cabinet is reinforced with multiple internal bracings. The midrange driver, positioned high on the front baffle, has its own isolated acoustic chamber, a separation that limits interference between frequency ranges. The four drivers are mounted with no visible screws thanks to machined aluminum rings using the “Seamless Diamond Cut” process, which gives the front a clean, seamless look. An acoustically transparent fabric grille attaches magnetically.

Three finishes are available: matte satin white, high-gloss black, and real walnut veneer.

Ceramic and titanium: two materials, four drivers

Canton has long used aluminum oxide ceramic diaphragms for its tweeters. The one in the Townus 100, a 25 mm dome, covers a range up to 40 kHz, making it compatible with high-resolution files (24-bit FLAC, DSD). A computer-optimized waveguide improves acoustic coupling and ensures homogeneous on-axis and off-axis dispersion.

The 174 mm midrange and the two 192 mm woofers share a titanium diaphragm technology (an aluminum-titanium composite). This “Triple Curved Cone” diaphragm features three successive curvatures that increase rigidity without adding unnecessary mass. The “Wave Surround” suspensions, with their multiple folds, allow for greater excursion while reducing unwanted resonances.

The two woofers operate in parallel, effectively doubling the radiating surface. Combined with Canton’s patented SC (Suspension Control) technology, they maintain controlled excursion even at the lowest frequencies, where other diaphragms can become unstable.

Down-firing bass-reflex

The bass-reflex port is built into the plinth, firing downward (“downfire” configuration). This layout has several advantages: it allows the speaker to be placed closer to the rear wall without causing excessive bass reinforcement, and it excites the room more uniformly than a conventional rear-firing port. Placement remains flexible, although a minimum clearance (around twenty centimeters) from boundaries is recommended to avoid a “boomy” effect.

The stated frequency response extends from 20 Hz to 40 kHz. These figures are measured with the manufacturer’s standard tolerance; in real-world conditions, low-frequency extension depends heavily on room volume and acoustic treatment. In a 30 to 50 m² living room, the Townus 100 can do without a subwoofer for stereo music.

Power handling and amplifier matching

Continuous power handling is 180 W, with 340 W peak (music power). Impedance varies between 4 and 8 ohms depending on frequency. These values indicate that an amplifier stable into low-impedance loads (4 ohms) will be more suitable than an entry-level model limited to 8 ohms. A quality integrated amplifier from 2 × 80 W will be sufficient for normal home use; to fully exploit the speaker’s dynamic potential at high volume, a more powerful unit (2 × 150 W or more) is preferable.

The rear binding posts accept banana plugs, spades, or bare wire. They are gold-plated to limit oxidation.

Integration into a home theater system

The Townus series includes several models designed to work together. The Townus 100 can serve as front speakers, paired with a Townus 50 as the center channel (same tweeter, same midrange) and compact Townus 30s for the surround channels. The Townus Sub 12, with its 300 mm driver and built-in amplifier, completes the setup for movie lovers seeking additional low-frequency extension.

Canton also offers the Smart Amp 5.1, a compact multichannel amplifier compatible with the Townus series and featuring built-in wireless streaming functions.

Compared with the Townus 90

The Townus 90, the next model down in the range, uses the same ceramic tweeter and the same 174 mm midrange, but its two woofers are 174 mm (versus 192 mm for the 100). The cabinet is about 5 cm shorter and the internal volume is smaller. In practice, the difference is apparent in deep bass and the ability to fill rooms larger than 25–30 m²: the Townus 100 offers greater dynamic headroom and more authority in the lower registers.

For a modest-sized living room (15–25 m²), the Townus 90 remains a relevant option, less bulky and just as tonally balanced.

Technical specifications

Speaker type

• 3-way bass-reflex floorstanding speaker
• Bass-reflex loading with downward-firing port (downfire)
• Level adjustment available

Drivers

• Tweeter
  • Quantity: 1
  • Diameter: 25 mm
  • Ceramic diaphragm
• Midrange
  • Quantity: 1
  • Diameter: 174 mm
  • Titanium diaphragm
• Woofers
  • Quantity: 2
  • Diameter: 192 mm
  • Titanium diaphragms

Technology

• Exclusive Titanium technology
• Acoustic principle: 3-way bass-reflex
• Passive resonator: bass-reflex
• Resonator radiation direction: downfire

Power handling

• Nominal power: 180 W
• Music power: 340 W

Frequency response

• Bandwidth: 20 Hz – 40000 Hz

Impedance

• 4 to 8 ohms

Dimensions

• Width: 27 cm
• Height: 110 cm
• Depth: 37 cm