Denon AVR-X3200W black

Main Features

• 7.2 channel AV surround receiver with 180W per channel
• Built-in Wi-Fi with dual antenna, built-in Bluetooth
• 4K/60Hz pass-through and 4:4:4 resolution, HDR, BT.2020
• Upscaling of digital and analog video signals up to 4K 60/50Hz
• Eight HDMI inputs (including one on the front) and two HDMI outputs with HDCP 2.2 support
• Dolby Atmos (up to 5.1.2)
• DTS:X support (via firmware update)
• Audyssey MultEQ XT room equalization
• High resolution audio streaming of DSD, FLAC, ALAC and AIFF
• AirPlay, Spotify Connect and Internet radio
• ECO mode with on/off/auto settings
• RS232 control, 7.2 channel pre-outs
• Front panel USB input

Experience the captivating world of immersive surround sound with the Denon AVR-X3200W AV surround receiver, featuring Dolby Atmos surround decoding and DTS:X (via firmware update in fall 2015) for the ultimate home theater experience. Wi-Fi and Bluetooth provide full wireless connectivity, with dual antennas to ensure reliable signal transmission and reception.

Stream your favorite tracks from Internet radio stations, Spotify Connect, or local network storage players, or use AirPlay or Bluetooth to stream directly from a smart device.

The Denon AVR Remote app for iOS and Android enables easy control. Enjoy 4K Ultra HD video (with HDCP 2.2 support), even from low-resolution sources, thanks to the advanced video processor with upscaling capabilities. Enjoy different video or audio content in a second zone with multi-room/multi-source functionality.

• Number of power amplifiers: 7
• Output power:
  • 180 W per channel (into 6 Ω, at 1 kHz, 1% THD, mono channel)
  • 135 W per channel (into 6 Ω, at 1 kHz, 0.7% THD, two channels driven)
  • 105 W per channel (into 8 Ω, 20 Hz - 20 kHz, 0.08% THD, two channels driven)
• Speaker impedance: 4 - 16 Ω
• Audyssey Dynamic Volume for real-time volume adjustment
• Audyssey DynamicEQ for optimized surround effects at low volumes
• High-quality audio components
• 192 kHz/24-bit digital-to-analog converters
• Multi-source/multi-room
• Digital transmission for iPod and iPhone (via USB)
• Suitable configuration for installation without a subwoofer

Preamplifier Section

• Input sensitivity/impedance: 200 mV/47 kohms
• Frequency response: 10 Hz - 100 kHz - +1, -3 dB (DIRECT mode)
• Signal-to-noise ratio: 100 dB (IHF-A weighted, DIRECT mode)

Connectivity

Inputs

• 8x HDMI input (1 front)
• 2x Component
• 3x Composite (video)
• 5x Analog audio
• 2x Digital optical
• 2x Digital coaxial
• 1x USB (front)

Outputs

• 2x HDMI monitor output
• Zone2/3 2-channel pre-out
• 7.2-channel audio pre-out (subwoofer)
• 1x Headphone

Other

• 1x Ethernet
• 1x RS-232C
• 1x Microphone port
• 1x FM tuner antenna
• 1x AM tuner antenna

Tuner Section

• FM: Tuning frequency range 87.5 - 108 MHz
• AM: Tuning frequency range 522 kHz - 1611 kHz

General

• Power supply: AC 230 V, 50 Hz
• Power consumption: 650 W (standby 0.1 W, CEC standby 0.5 W)
• Power consumption: 45 W (ECO mode on)
• No sound output: 80 W (ECO mode off)
• Dimensions (W x H x D): 434 x 167 x 388 mm
• Weight: 11.3 kg