Skip to content
HomeCineSolutionsFrance
EN
Quote
Contact
Account
Basket

Specifications and features

HDMI

Overview

HDMI 2.1 requires so much bandwidth that even the slightest weakness in the cable shows up on screen: picture dropouts, a black screen for a few seconds, or a format renegotiated to a lower setting. This in-akustik cable carries video data over optical fiber and keeps copper for everything else. It carries Ultra High Speed certification and draws its power from the source’s HDMI port, with no external power supply.

Fiber for the picture, copper for everything else

The cable is a hybrid design. Each connector contains a small electronic circuit. At the source end, it converts the electrical signal into light pulses, and at the display end, it performs the reverse conversion. The high-speed channels, which carry the picture and multichannel sound, run through the fibers. The copper conductors handle power for these electronics and the service signals: CEC control (one remote to control several devices), EDID exchange (the source reads the formats supported by the display), the ARC/eARC audio return channel, and the 100 Mbit/s HDMI Ethernet link.

This division has a practical consequence. Light is unaffected by electromagnetic interference, so the video signal remains stable even when the cable shares a conduit with power cables or runs alongside a powered subwoofer. in-akustik specifies a range of 50 m for ARC and 30 m for eARC, which run over copper. At this length, those limits are still a long way off.

Connection direction matters

The built-in electronics require the cable to be connected in a specific direction. Each end is marked: one goes to the source (Blu-ray player, console, set-top box, home theater receiver), the other to the television or projector. If the cable is connected the wrong way around, no picture appears. When using a concealed conduit, check this before pulling the cable through.

The direction applies only to the video stream. Audio sent back from the television to a receiver or soundbar over eARC travels over copper and works normally, regardless of the direction of the picture signal. With a receiver positioned between the sources and the display, the “source” end connects to the receiver’s HDMI output and the “display” end to the television’s eARC input.

The full 48 Gbit/s of HDMI 2.1

With 48 Gbit/s of bandwidth, the cable supports all the formats specified by the standard: 4K at 120 Hz, 8K at 60 Hz, and up to 10K at 120 Hz with DSC (Display Stream Compression, visually lossless compression applied by the source). Color is carried in 4:4:4 at 12 bits per component, without subsampling, keeping edges sharp on text and interfaces displayed by a PC. HDR10, HDR10+ and Dolby Vision formats are all supported, as is the HDCP 2.3 protection required by streaming services and Ultra HD discs.

For gaming, the cable transmits the HDMI 2.1 features of recent consoles and graphics cards. VRR matches the display’s refresh rate to the game’s frame rate to eliminate screen tearing. ALLM switches the television to game mode as soon as the console turns on. QMS reduces the black screen when changing refresh rates, while QFT reduces display latency. For audio, it carries high-resolution formats, uncompressed Dolby Atmos over eARC, DSD, and automatic lip sync.

All these features remain optional in the HDMI 2.1 standard. The cable only transmits them: both the source and the display must support them. On many televisions, only certain HDMI inputs accept the full bandwidth, and an enhanced signal setting often needs to be enabled in the menu for the selected input.

Ultra High Speed certification and metal connectors

The cable carries Ultra Certified certification from HDMI Licensing. This program tests each length within a cable family, so certification for one model does not cover another length. It guarantees 48 Gbit/s bandwidth as well as resistance to interference involving Wi-Fi and nearby wireless networks.

The connectors have an all-metal housing, which protects the conversion electronics during handling. The 24-karat gold-plated contacts resist oxidation through repeated connections, but this plating makes no difference to signal quality. The jacket remains flexible and bends easily, an advantage when routing it through an electrical conduit or behind a wall-mounted television, where a copper HDMI 2.1 cable is often stiff. The cable complies with CE, REACH and RoHS standards.

Fiber Optic Technology

  • EDID compatible
  • Supports chroma subsampling of 4:4:4, 4:2:2 and 4:2:0
  • Supports color depth of 36 bits (3 x 12 bits)
  • 120 Fps compatible
  • DSC (Display Stream Compression) compatible
  • ARC up to 50 m / eARC up to 30 m
  • Fully metal connector

Miscellaneous

  • Powered via HDMI interface
  • No separate power supply needed
  • Direction indicated
  • Cable diameter of only 4 mm
  • Extremely flexible and easy to install
  • Complies with CE, REACH, RoHS standards

Frequently asked questions

Why choose fiber when a copper cable can cover this distance?

in-akustik also offers Ultra High Speed copper cables in its Premium series, up to the same length. At maximum bandwidth, passive copper approaches its limits over several metres and becomes sensitive to connector quality and nearby interference. Fibre retains a comfortable margin and is immune to interference. It is particularly worthwhile for an in-wall connection, which is difficult to replace once installed, or for a 4K 120 Hz projector.

Does the cable work with HDMI 2.0 or older devices?

Yes. It remains compatible with previous versions of the HDMI standard, and the connection then adjusts to the capabilities of the older device. An HDMI 2.0 player connected to an HDMI 2.1 TV will operate at 4K 60 Hz, just as with any other cable.

How do I connect the cable to a soundbar using eARC?

When the sources are connected to the TV and the soundbar only receives audio, the “source” end goes into the soundbar’s HDMI eARC port and the “display” end into the TV’s eARC port. Audio travels back from the TV to the soundbar through the copper conductors, regardless of the video direction. You also need to enable eARC in the TV settings.

Can the cable be run through an existing conduit?

Yes, provided the conduit is wide enough for the factory-fitted HDMI plug, which cannot be removed. For conduits that are too narrow, in-akustik offers an MPO version of its fibre-optic HDMI 2.1 cable with detachable HDMI plugs, which are reattached once the cable has been pulled through. With both versions, it is best to avoid tight bends, as fibre is less tolerant of these than copper.

Can the cable’s Ethernet connection replace a network cable?

The 100 Mbit/s HDMI Ethernet function is supported, but very few devices use it. For 4K streaming or console updates, an RJ45 Ethernet cable or Wi-Fi is still the solution to plan for.

How can I check that the cable is properly certified?

Ultra Certified cables have a label with a QR code and a hologram on their packaging. The official HDMI Cable Certification app scans this code and confirms that it is a tested model in the specified length.

User reviews

Sébastien

Very good cable that perfectly fulfills its role.

Comment from 20 October 2021 — Experience from 20 June 2021

Automatically translated — Show original (French)
Très bon câble qui remplit parfaitement son rôle.
  • Eco-contribution included in the sale price.
  • Manufacturer reference: 009245030
  • GTIN / EAN: 4001985519941
HomeCineSolutions
Loading