Audioquest Angel RCA/RCA DBS 3m

AudioQuest Angel RCA/RCA DBS: the pinnacle of the Bridges & Falls series

This RCA cable is the top model in the Bridges & Falls series, the only one in this range to use solid silver conductors. AudioQuest designed this analog interconnect for systems where every detail matters, combining their proprietary technologies in a compact and flexible format.

Perfect-Surface silver conductors

Solid Perfect-Surface Silver (PSS) conductors eliminate strand interaction, a major source of distortion in twisted cables. High-purity silver also minimizes disturbances caused by grain boundaries found in any metal conductor. In practical terms, Perfect-Surface technology applied to very pure silver reduces sonic harshness compared with OFHC, OCC, or 8N copper.

This solid (non-stranded) structure transmits low-level signals more effectively than a multi-strand cable. The difference is audible from the very first seconds: the system sounds more present, more alive.

The 72-volt DBS system, an AudioQuest patent

The 72V DBS (Dielectric-Bias System) saturates and polarizes the insulation, enabling clear, dynamic sound against a very quiet background. The principle is simple: any insulation slows the signal, but in a non-uniform way across frequencies when it is not polarized. These differences in time delay are problematic for a multi-octave audio signal that is highly time-sensitive.

DBS creates a stable electrostatic field that organizes the molecules of the insulation. This minimizes both energy storage in the insulation and the multiple non-linear time delays. The battery pack (included) lasts for several years and features a test button with LED to check its status. An RF trap, developed for AudioQuest’s Niagara power products, prevents radio interference from entering the conductors from the DBS elements.

FEP air-tube insulation

Any solid material adjacent to a conductor is part of an imperfect circuit: the insulation absorbs energy, stores some of it, then releases it as distortion. Air absorbs virtually no energy, and FEP (fluoropolymer) is the best extrudable solid insulation available.

The positive conductors benefit from near-zero contact between the metal and their FEP insulation, which has a low dielectric constant and minimal interference with the signal. The negative conductors use intentionally “lossy” insulation: no air, no FEP, to optimize their different function in the circuit.

Three-layer NDS shielding

Three alternating layers of metal and carbon-loaded synthetics “shield the shield,” absorbing and reflecting most RF energy before it reaches the ground-connected layer. This carbon-based NDS (Noise-Dissipation System) prevents captured interference from modulating the component’s ground reference.

Asymmetrical double-balanced geometry

Designed for unbalanced (single-ended) applications, this geometry provides lower impedance on the ground for richer, more dynamic reproduction. While many unbalanced cables use a single path for ground and shielding, the double-balanced design separates them for cleaner, quieter performance.

The Bridges & Falls series houses the left and right channels in a single jacket, with asymmetrical double-balanced geometry and separate high-quality positive and negative conductors. This design allows for a thin, flexible, and versatile cable.

Solder-free connectors

The RCA plugs are made of pure red copper with direct silver plating, assembled by cold welding. This design avoids conventional soldering, a frequent source of distortion. The ground shells are stamped rather than machined, making it possible to choose the metal for its low distortion rather than for ease of machining.

Technical characteristics

Technical specifications

• Type: 2-male RCA analog cable
• Conductors: Perfect-Surface Silver (PSS) solid silver
• Shielding: carbon-based Noise-Dissipation System (NDS)
• Insulation: FEP air tube
• Dielectric-Bias System: 72V (DBS)
• Terminations: silver-plated pure red copper, cold-welded
• Geometry: asymmetrical double-balanced

Audio technologies

• PSS silver conductors
  • Solid silver to limit electrical and magnetic interactions
  • Reduced distortion and linear dissipation of RF noise
• Carbon + NDS noise dissipation
  • Alternating layers of metal and carbon-loaded synthetics
  • Shielding protection and absorption of most RF noise before ground
• 72V Dielectric-Bias System (DBS)
  • Dielectric stabilization to prevent phase shifts
  • Integrated RF trap to prevent noise from entering the signal
  • US patents no. 7,126,055 and 7,872,195 B1
• FEP air-tube insulation
  • Positive conductors insulated by air for a clear signal
  • Negative conductors with intentionally lossy insulation for a complementary role
• Asymmetrical double-balanced geometry
  • Separation of shielding and ground for a cleaner signal
  • Optimized impedance for richer, more dynamic sound

Key features

• Perfect-Surface Silver (PSS) conductors to minimize distortion
• FEP air-tube insulation to preserve dynamics and clarity
• 3-layer Carbon noise dissipation + 72V DBS to reduce interference
• Asymmetrical double-balanced geometry for a cleaner, more dynamic signal
• Silver-plated pure red copper terminations, cold-welded

Audio performance

• Lossless high-fidelity audio transmission
• Reduced noise and interference
• Clearer, more natural, and more dynamic sound reproduction

Use

• Connect the cable’s RCA plugs to the source device outputs
• Plug the RCA plugs into the playback device inputs
• Compatibility: CD players, digital-to-analog converters (DACs), amplifiers, preamplifiers, and other devices equipped with RCA connectors