Tonewinner SW-D2000
This product is no longer available for sale!
Tonewinner SW-D2000: 12-inch subwoofer with DSP
When a long-established Chinese manufacturer (founded in 1992, over 30 years in audio) tackles the domestic bass market, the result deserves attention. The SW-D2000 is a bass-reflex subwoofer equipped with a 30 cm driver, 400 W RMS Class D amplification, and comprehensive DSP processing controllable from a smartphone. A solid technical proposition for home theater and stereo setups.
A transducer designed for endurance
The SW-D2000’s 30 cm driver is based on a rigid cone mounted on a high-precision cast basket. This rigidity helps limit distortion, including during the large excursions required by low frequencies. The voice coil uses a four-layer OFC (oxygen-free copper) winding, which improves thermal handling during prolonged use. The dual magnet stabilizes the magnetic flux and allows sustained operation without performance degradation.
The subwoofer uses a bass-reflex design with a rectangular rear-firing port. This type of loading favors efficiency in the deep bass range: Tonewinner claims a response extending down to 18 Hz. The usual trade-off with ports, a slight group delay in the very low end, remains manageable thanks to the integrated DSP settings. The reinforced MDF structure (23 kg empty) helps limit unwanted cabinet vibrations.
Amplification and signal processing
The Class D amplification stage delivers 400 W RMS into 3 Ω, with a claimed peak capacity of 2000 W. Class D offers the advantage of high efficiency and compact size, which makes it possible to house the electronics in a small volume while maintaining ample power reserves.
DSP processing is one of the SW-D2000’s strong points. Four preset modes (Deep, Normal, Strong, User) allow you to quickly adapt the subwoofer’s behavior to the content: music, action movies, more subdued soundtracks. The User mode provides access to a parametric equalizer for fine-tuning. You also get the usual settings: crossover frequency (up to 240 Hz), phase (0° or 180°), gain. These parameters are displayed on the rear LCD screen and can be adjusted via touch buttons or, more conveniently, from the Tonewinner mobile app (available on Android and iOS, Bluetooth connection).
Connectivity and system integration
The rear panel offers sufficiently versatile connectivity to adapt to most setups. The balanced XLR input will be appreciated in installations where cables run over long distances, reducing the risk of interference. The stereo RCA and Sub/LFE inputs cover typical use cases with a home theater receiver or hi-fi preamplifier.
The Sub/LFE output allows you to daisy-chain a second subwoofer, an interesting option for large rooms or setups where you want to smooth room modes with two bass sources. The power supply accepts both 110–115 V and 220–230 V (manual switching), making it easier to use in different countries.
The subwoofer automatically goes into standby when no signal is present, then wakes up as soon as an audio signal is detected. This behavior reduces idle power consumption without requiring manual intervention.
Technical specifications
Speaker
- Diameter: 30 cm (12 inches)
- Number of speakers: 1
- Enclosure type: bass-reflex
- Port position: rear
Amplification
- RMS power: 400 W (3 Ω)
- Frequency range: 18 Hz – 240 Hz
- Available settings: crossover frequency, phase 0° / 180°, gain
DSP features
- Digital DSP processing for deep and accurate bass
- Parametric equalizer for detailed adjustments
- Control via mobile app (Android and iOS) and touch screen
- Wireless software update
Connectivity
- Inputs
- Sub / LFE x1
- Stereo RCA x1
- Mono XLR x1
- Outputs
- Sub / LFE x1
- Stereo RCA x1
User interface
- LCD screen with touch buttons for intuitive adjustments
- Remote control via mobile app (Android and iOS)
- Automatic power-saving mode when no signal is detected
Power supply
- AC 110–115 V / 220–230 V switchable
Highlights
- Deep, immersive bass reproduction down to 18 Hz for total immersion
- DSP and parametric equalizer for precise room calibration
- Remote control via mobile app
- Extended compatibility thanks to XLR and RCA inputs
- Robust, durable design suited to demanding installations
General information
- Brand: Tonewinner
- Model: SW-D2000
- Color: black
- Dimensions (W x H x D): 426 x 440 x 472 mm
- Net weight: 23 kg
Frequently Asked Questions
Is the SW-D2000 compatible with all home theater receivers?
Yes, the presence of an RCA Sub/LFE input ensures compatibility with virtually all AV receivers on the market. The XLR input is suitable for professional or semi-professional equipment with balanced outputs.
How does the Tonewinner mobile app work?
The app connects to the subwoofer via Bluetooth. It provides access to all DSP settings: mode selection (Deep, Normal, Strong, User), parametric EQ adjustment, modification of crossover frequency, phase, and gain. Changes are applied in real time.
Can two SW-D2000 units be used together?
Yes. The Sub/LFE output allows you to connect a second subwoofer in series. This configuration improves bass distribution in the room and reduces room mode issues (areas where bass is exaggerated or missing depending on the listening position).
Is the subwoofer suitable for hi-fi music listening?
The SW-D2000 is designed for both home theater and hi-fi. Its response extending down to 18 Hz and its DSP settings allow it to complement floorstanding or bookshelf speakers in a stereo system. The parametric equalizer helps integrate the subwoofer without overloading the low end.
Is the rear port an issue when placed near a wall?
Placing it too close to the wall can accentuate certain low frequencies and create a boomy effect. A distance of 15 to 25 cm is generally sufficient. The DSP settings allow for partial compensation if space is limited.
- Eco-contribution included in the sale price.
- Manufacturer reference: TONSWD2000
- GTIN / EAN: 6942550341513
