ClearAudio Pack Concept Active light wood

It is fully assembled and adjusted at the factory. Thanks to its built-in phono preamp and headphone output, you can easily switch from direct headphone listening to listening on your hi-fi system. Its integrated headphone amplification stage will suit most dynamic headphones on the market.

Beneath the elegant, contemporary exterior lies a level of technical sophistication unique to Clearaudio. The concept’s body is carefully crafted. The top layer of the body incorporates a special high-tech satin plastic compound designed to minimize unwanted resonances.

The DC motor is powered by an external voltage-stabilized power supply and is completely decoupled from the turntable body to avoid any mechanical interference.

• The pack includes:
  • Concept Active TT057 light wood turntable
  • Verify TA035C tonearm
  • Concept MC MC023 cartridge

Platine Concept active TT057

• Analog turntable with internal belt drive
• Decoupled DC motor with low-noise bearing
• Speed: 33 RPM, 45 RPM & 78 RPM
• Anti-resonant aluminum & black chassis
• Bronze platter axis
• POM platter
• Speed variation: +/- 0.04%
• Phono preamp and headphone output

General Specifications

• Power Consumption
  • Max. Consumption: 1.5 Watts
  • Operating Consumption: 0.5 Watts
• Weight: Approx. 7.5 kg
• Dimensions (W x H x D): 420 x 350 x 125 (with tonearm)

Verify TA035C Tonearm

• Frictionless tonearm with magnetic bearing technology
  • With silver aluminum tube
• Cartridge balance range: 2.5 g - 17 g
• Null points:
  • Inner: 66.04
  • Outer: 120.9
• Overhang: 17.31 millimeters
• Wiring:
  • Clearaudio Direct Wire Plus (1.1 m)
  • Terminated with RCA plug
• Pivot to stylus distance: 222 millimeters
• Offset angle: 25.54°
• Tilt angle: 0.123° / cm
• Average skating factor: 0.43
• Effective arm length: 9.4 inches (exactly 239.31 mm)
• Total length: 302 millimeters
• Mounting style: Clearaudio (24.85 mm bore diameter)
• Total weight:
  • 300 grams
  • 430 grams (including counterweight)

Concept MC MC023 Cartridge

• Moving coil cartridge
• Cartridge mass: 8.0 g (± 1 g)
• Frequency response: 20 Hz - 40 kHz
• Output voltage (1KHZ, 5cm/s): 0.4 mV
• Channel separation (1 KHZ): > 30 dB
• Channel balance (1 KHZ): <0.5 dB
• Tracking ability: 80 μm
• Recommended tracking force: 2.0 g (± 0.2 g)
• Coil impedance (1 KHZ): 11Ω
• Cantilever / stylus shape: Line Bore / Micro
• Compliance: 9 μ / mN
• Coil material: OFC - copper
• Cartridge body: Aluminum-magnesium alloy with ceramic surface coating