Élysium Screens Zenith Eclipse UST 120"

UST projectors, positioned just a few centimeters from the wall, project their beam at a steep angle that makes conventional screens (and white walls) unsuitable: stray reflections, amplified textures, washed-out contrast. The Zenith Eclipse UST addresses this optical constraint with an ALR screen material specifically oriented to capture light coming from below while rejecting light coming from the ceiling and sides.

A screen that appears and disappears

The main advantage of a floor-rising motorized screen lies in its discretion. The Zenith Eclipse UST deploys from its housing, rises in a few seconds thanks to a scissor mechanism, then retracts completely once the viewing session is over. This configuration suits living rooms and multipurpose spaces where a permanent fixed screen is not desirable.

The lateral cable tensioning system keeps the screen material perfectly flat once deployed, a critical point with UST projectors that amplify the slightest ripple or surface curvature. The motorization is advertised as quiet, and deployment is controlled via the included remote control or a USB trigger that can synchronize the screen with the projector powering on.

The aerospace-grade aluminum housing

Élysium Screens has chosen a so-called “aerospace-grade” aluminum alloy housing, a designation that refers to 6000 or 7000 series alloys, known for their strength-to-weight ratio. This choice is justified by the mechanical stress the housing undergoes: it must support the scissor mechanism, the tensioned screen material, and repeated deployment cycles without deforming. Aluminum also offers the advantage of resisting humidity, which can extend the lifespan of the internal mechanism in less controlled environments.

How Eclipse ALR screen material works

ALR (Ambient Light Rejecting) technology relies on a surface structure that treats light differently depending on its angle of incidence. On a UST screen, the material generally features a “sawtooth” or lenticular microstructure: the upper part of each micro-element, oriented upward, absorbs light coming from the ceiling (the main source of light pollution in a living room), while the inclined part reflects the projector beam toward the viewer.

The Eclipse material features a 90% rejection rate for light coming from the ceiling and sides. In concrete terms, this makes it possible to maintain usable contrast during the day with the curtains open, where a conventional white screen would produce a washed-out image. The opaque black backing prevents any light from passing through the material from behind, which further enhances perceived blacks.

0.8 gain: the brightness/contrast compromise

A screen’s gain measures the amount of light reflected toward the viewer compared with a reference surface (gain 1.0). With a gain of 0.8, the Eclipse material reflects slightly less light than a standard matte screen. This deliberate choice is explained by the very nature of ALR screens: the material that absorbs ambient light also absorbs part of the projector’s light.

In practice, a gain of 0.8 works well with UST projectors rated at 2500 lumens or more, which corresponds to the majority of current laser models (Hisense, XGIMI, Formovie, AWOL Vision, etc.). Colors remain saturated, blacks gain depth, and the image retains a natural look without the “mirror” effect that high-gain screens can produce.

A wide viewing angle: 170°

The 170° viewing angle (that is, 85° on each side of the central axis) means the image remains visible and properly contrasted even for viewers seated off to the sides. This characteristic sets lenticular screens apart from Fresnel screens, which often offer better light rejection but a restricted viewing angle of around 50°, becoming troublesome as soon as you move away from the center.

For family use where several people are watching from an angled sofa or side chairs, this wide angle avoids image degradation issues at the edges of the field.

4K, 8K, and HDR compatibility

The material is compatible with 4K and 8K Ultra HD content as well as HDR. In practice, this means the surface microstructure is fine enough not to create moiré or visible texture with high-resolution content. On some entry-level ALR screens, the optical structure can interfere with definition and produce a “shimmering” effect or visible grain up close. Screens in this category generally use micrometer-pitch structures that remain invisible at a normal viewing distance.

Installation and setup

The Zenith Eclipse UST is intended to be plug-and-play: place the housing, connect the power, synchronize the remote control. The manufacturer announces installation in just a few minutes, which matches what is observed on competing floor-rising motorized screens.

A few points deserve attention. The housing must be perfectly aligned with the UST projector, which projects from below at a precise angle. A shift of just a few centimeters can create geometric image distortion. Most UST projectors include keystone correction and four-corner adjustment, but good initial physical alignment remains preferable.

Technical Specifications

Motorized deployment and discreet design

• Deploys from the floor in seconds and fully retracts after use
• Perfectly flat surface thanks to lateral cable tensioning, for a sharp, high-contrast image
• Plug & Play installation: quick setup, effortless, in just a few minutes
• Simplified control: remote control and USB trigger included

Dimensions

• Aspect ratio: 16/9
• Diagonal: 120” (304.8 cm)
• Image area: 265.7 × 149.5 cm
• Housing width (cable included): 291 cm
• Top bar width: 273.1 cm
• Total height: 188.5 cm
• Height under housing: 35 cm
• Weight: 33 kg

Housing

• Aircraft-grade aluminum alloy housing: maximum strength and longevity
• Lateral cable tensioning system for a durable flat surface
• Premium scissor mechanism for smooth, durable movement
• Remote control and USB trigger supplied

Eclipse ALR screen fabric

• ALR ambient light rejection technology
  • Designed for Ultra Short Throw (UST) projectors: absorbs ambient light while precisely reflecting the projected image
  • Light absorption: up to 90% of reflections from the ceiling and sides
• Gain: 0.8, perfect balance between brightness and contrast
• Viewing angle: ultra-wide 170° (85° left / right)
• Optimized colors and blacks: deep blacks, enhanced contrast, vivid colors even in broad daylight
• Compatibility: 4K / 8K Ultra HD, HDR
• Opaque black backing: prevents any light penetration from the rear

General information

• Quick and simplified assembly
• Storage: flat
• Suitable for bright living rooms or multipurpose spaces
• Transforms any room into an immersive home theater without total darkness