Canton Pro X.3 black (pack of 2)
Canton PRO X.3: a compact speaker for sheltered indoor and outdoor use
Small in size, the PRO X.3 is part of Canton’s universal range. This two-way bass-reflex speaker is designed to adapt to a variety of environments: covered terraces, cellars, verandas, bathrooms, as well as home cinema or multiroom systems. The German manufacturer has equipped it with moisture protection and a reinforced enclosure, while maintaining a sound signature faithful to its hi-fi standards.
Discreet form factor and flexible installation options
With dimensions of 12 × 19.5 × 13 cm and a weight of 1.7 kg, the PRO X.3 is easy to place. Canton supplies a U-shaped mounting bracket that allows for wall mounting, ceiling installation, or angled placement as needed. Once in position, the speaker can rotate nearly 90° to either side to adjust sound direction.
A safety cable comes with each unit. This precaution, mandatory in commercial or public environments, is also reassuring at home when installing the speaker high up above a passageway.
The rubberized plastic enclosure is impact-resistant. Two finishes are available: black seidenmatt (silk-matt) or satin white, both neutral enough to blend into most décors.
Drivers and acoustic design
The PRO X.3 features a 25 mm textile dome tweeter and a 110 mm mid-bass driver whose aluminum cone is surrounded by a Wave-Surround suspension, an in-house technology Canton uses on several of its ranges. The aim is to reduce distortion and improve cone excursion at high volume.
The bass-reflex system extends the low-frequency response down to 45 Hz according to the manufacturer. This figure is somewhat optimistic given the enclosure volume, but bass remains perceptible for a speaker of this size. The crossover frequency between the two drivers is set at 2,500 Hz.
With a sensitivity of 87 dB (2.83 V/1 m), it requires an amplifier capable of delivering a bit of power to reach high sound levels outdoors, where sound dissipates quickly. Canton specifies a continuous power handling of 50 W and a peak power of 100 W.
Outdoor use: what you need to know
Canton describes the PRO X.3 as a “moisture-proof” speaker, meaning protected against humidity. This does not mean it can be left exposed to direct rain or prolonged frost. User feedback confirms that installation under an awning, pergola, or eave offers the best guarantee of longevity.
For uncovered outdoor use or in regions where temperatures regularly fall below zero, other more waterproof solutions exist on the market, but they are generally more expensive and often less acoustically performant at equivalent volume.
Integration into an audio system
The 8 Ω impedance makes the PRO X.3 compatible with virtually all hi-fi amplifiers and home cinema amps. It can be used as a surround speaker, a satellite in a 5.1 or 7.1 system, or simply to provide sound in an additional room via a zone B output.
Canton recommends adding a subwoofer for demanding listening sessions or larger spaces. The manufacturer’s range includes several models such as the Power Sub 8 or Power Sub 10, but any active subwoofer with adjustable crossover frequency will do.
The binding posts accept standard-gauge cables. Users report that cables that are too thick may be difficult to insert into the terminals, so it’s best to stick to 2.5 mm² or less.
Documentation
Technical specifications
Acoustic characteristics
- Acoustic principle: bass-reflex
- Frequency range: from 45 Hz to 26,000 Hz
- Sensitivity (2.83 V / 1 m): 87 dB
- Crossover frequency: 2500 Hz
- Tweeter
- Diameter: 25 mm
- Material: fabric
- Mid-bass driver
- Diameter: 110 mm
- Material: aluminum (Wave-Surround)
Electrical characteristics
- Nominal power: 50 W
- Music power: 100 W
- Impedance: 8 Ω
Physical characteristics
- Dimensions (W x H x D): 12 x 19.5 x 13 cm
- Weight: 1.7 kg
Connectivity
- Speaker connection
Included in delivery
- User manual
- Safety cords
- Screws
- Wall plugs
- Serrated lock washers
General information
- Universal speaker for indoor and outdoor use
- Moisture-resistant
Frequently Asked Questions
Can the PRO X.3 stay outside all year round?
Canton designed it for use in sheltered outdoor areas. Prolonged exposure to direct rain or sub-zero temperatures can damage the components. Under a roof overhang or pergola, it should withstand the seasons without issues.
Which amplifier should I choose for this speaker?
An amplifier capable of delivering between 30 and 80 W per channel into 8 Ω is sufficient. Outdoors, where sound disperses, having some power in reserve is always useful. Entry-level and mid-range home cinema amps are perfectly suitable.
Is the PRO X.3 sold individually or in pairs?
It is generally sold individually, allowing you to purchase exactly the number of speakers needed for a custom installation.
Can it be used as a ceiling speaker for a Dolby Atmos system?
Yes, the supplied bracket allows ceiling mounting. Its adjustable orientation lets you direct sound toward the listening area. It is not “Dolby Enabled” certified, but it works as a height effects channel in a conventional Atmos setup.
Is a subwoofer essential?
For background listening or light musical ambience, the PRO X.3 is adequate on its own. For movies or more engaging music listening, an active subwoofer will provide the low-end foundation that this compact format cannot fully deliver.
- Eco-contribution included in the sale price.
- Manufacturer reference: 02968
- GTIN / EAN: 4010243029689
