Kanto SU2 black

Placing compact speakers flat on a desk means accepting an often underestimated acoustic compromise. The reflective surface of the desktop sends part of the sound back to the listener with a very slight delay, blurring details and coloring the sound reproduction. Kanto’s SU2 addresses this specific problem with an original approach: a steel stand that attaches to the back of Ora and Uki speakers, lifting them off the desk while creating a visual floating effect.

Rear mounting that frees up cable access

Where most desktop stands slide under the speaker or cradle it in a tray, the SU2 uses a rear-mounting principle. A 1/4”-20 screw (included) fits into the threaded insert provided for this purpose on the back of the Ora and Uki. The speaker then rests on the stand with its weight supported against the steel structure, which frees up the front and, above all, leaves full access to the rear connections. Plugging in a USB-C cable, RCA, or connecting a subwoofer requires no manipulation of the stand.

This type of mounting has an appealing side effect: the speaker seems to float above the desk. The visual result is clean, refined, and the cables disappear behind the structure.

Thirteen degrees of tilt, and why it matters

The SU2 tilts the speaker upward by 13°. This is not a randomly chosen angle. On a standard desk, a seated position places the ears well above speaker level. The silk dome tweeters in the Ora and Uki (3/4 inch) disperse treble directionally: when the tweeter axis is not pointed toward the listener, the high frequencies lose precision and energy. The 13° tilt brings the dispersion axis back to ear level in a typical desktop setup, for more linear listening and better-defined stereo imaging.

The other benefit of this elevation is acoustic. By raising the speaker several centimeters, the SU2 increases the distance between the driver and the desk surface. Early reflections (that bounce of sound off the desktop that reaches the ear with a delay of a few milliseconds) are reduced. The result: less comb filtering, cleaner midrange sound.

Steel and silicone, nothing superfluous

The construction is simple and robust. Each stand is made of solid steel with a powder-coated finish (available in black or white). The weight of 500 g per stand ensures good stability on the desk. Silicone pads are integrated into the base: they damp vibrations to prevent speaker resonances from being transmitted to the desktop, maintain grip on the desk surface, and protect against scratches.

The whole assembly is compact (8.4 × 14.3 × 16.5 cm per stand) and each unit supports a maximum load of 1.4 kg. The Uki weigh between 0.9 and 1 kg depending on the model (passive or active), and the Ora are in a similar range: the margin is comfortable.

Compatibility: a deliberately niche product

The SU2 only works with Kanto Ora and Kanto Uki speakers. This is a deliberate choice: the rear 1/4”-20 threaded insert and the geometry of the stand are calibrated for these two models. It cannot be used with other speakers in the Kanto range (the YU2, YU4, or REN, for example, do not have the same mounting point) or with speakers from other brands. This specialization has its advantages: the fit is precise, with no play or adapter, and the tilt angle matches the format of these compact speakers.

For YU2 owners, Kanto offers the S2, a 16° angled stand on which the speaker rests by gravity. The SU2 is a product of a different nature, with its mechanical mounting that secures the speaker to the stand.

Technical Specifications

Key Features

• Design dedicated to Ora and Uki speakers
• Rear mounting with unobstructed access to connections
• Optimized tilt for direct, linear listening
• Reduced unwanted reflections caused by the stand
• Desk space savings with a “floating” effect
• Silicone pads ensure vibration absorption and increased stability

Technical Specifications

• Maximum load: 1.4 kg per stand
• Tilt: 13° upward
• Mounting: 1/4”-20 thread (rear mounting)
• Materials: solid steel with powder-coated finish
• Function: mechanical decoupling and optimized sound dispersion

Dimensions and Weight

• Product dimensions (W x D x H): 8.4 x 14.3 x 16.5 cm
• Product weight: 0.5 kg
• Packaging dimensions (W x D x H): 12 x 23.8 x 9 cm
• Packaged weight: 0.6 kg

Box Contents

• 1 pair of SU2 stands
• 1/4”-20 mounting screws
• Documentation