Paradigm Premier 720F v2 black wood (pack of 2)
Overview
Four drivers, three-way design, two Carbon-X woofers, and a patented phase lens: the Paradigm Premier 720F v2 brings together technologies derived from the Canadian manufacturer’s higher-end series in a reasonably sized floorstanding speaker. This second generation retains the compact enclosure of the previous model while completely redesigning the drivers and internal structure, with a clear goal: more precise midrange reproduction and tighter bass.
A three-way bass-reflex design
The configuration is based on four drivers distributed across three frequency bands. A 25 mm AL-MAC ceramic dome tweeter handles the treble from 1.3 kHz upward. A dedicated 152 mm AL-MAG midrange covers the band most exposed to the ear, between 500 Hz and 1.3 kHz. Two 152 mm Carbon-X woofers jointly handle the low end below 500 Hz, in a bass-reflex design (tuned port). The crossover is 2nd-order electro-acoustic (12 dB/octave) at each of the two crossover points, a classic compromise between crossover slope and phase quality at the junction.
AL-MAC tweeter, OSW waveguide, and PPA lens
The 25 mm ceramic dome combines aluminum, magnesium, and ceramic to deliver lightness, rigidity, and internal damping. Two elements surround it and determine its directivity. The OSW waveguide (Oblate Spheroid Waveguide) shapes dispersion toward the listening area while reducing reflections from the ceiling and side walls. The PPA (Perforated Phase-Aligning) lens placed in front of the dome acts as an acoustic filter: it lets in-phase frequencies pass and blocks out-of-phase components, which helps maintain wavefront coherence in the treble. The tweeter is damped and cooled by ferrofluid, a common practice at Paradigm to extend sustainable dynamics in the high frequencies.
The dedicated-band AL-MAG midrange
In a three-way speaker, the midrange band is where vocal intelligibility and the realism of instrumental timbres are determined. Paradigm dedicates this area to a 152 mm driver with an AL-MAG cone, an aluminum-magnesium alloy chosen for its stiffness-to-mass ratio. The center of the cone features a PPA lens, identical in principle to the tweeter’s, which helps align frequencies at the driver’s output. The voice coil measures 50 mm in diameter, is multilayered and resistant to high temperatures to handle level peaks without compression, and is mounted on a ventilated Apical former.
Two Carbon-X woofers and ART Gen3 technology
Bass is entrusted to two 152 mm drivers with a one-piece Carbon-X cone, formed from a single piece to increase rigidity and limit moving mass. The surround uses the third generation of Active Ridge Technology (ART Gen3), a reinforced roll surround profile that Paradigm pairs with a vertical mounting system. The goal is significant excursion with low harmonic distortion at high levels. The 25 mm voice coil this time shares the ventilated Apical former principle. Extension at -3 dB reaches down to 27 Hz (DIN measurement), a value consistent with a floorstanding speaker of this volume and loading.
MDF cabinet and Outrigger feet
The cabinet is made of MDF with internal bracing to reduce coloration from the enclosure itself. Three finishes are offered: Piano Black, Black Walnut, and Walnut. Under the speaker, Paradigm installs Outrigger Shock-Mount feet, a lateral spacing system that widens the support base and mechanically decouples the floorstander from the floor via damping inserts. Two sets of tips are included: metal spikes for carpet or rugs, rubber tips for wood or tile floors. The resulting wider footprint improves the floorstander’s stability (26 kg) and bass behavior.
Measurements and amplifier power
The on-axis frequency response is rated at ±3 dB from 55 Hz to 23 kHz, with controlled roll-off at 30° off-axis (upper limit extended to 20 kHz), a sign of progressive rather than abrupt directivity. Sensitivity is given as 89 dB in anechoic measurement and 92 dB in-room. The recommended amplifier power range extends from 15 to 220 W, with a maximum input power of 180 W. The impedance is rated as 8-ohm compatible, which simplifies the choice of an integrated amplifier or hi-fi preamplifier/power amplifier combination.
Uses in stereo hi-fi and home theater
In a stereo system, a pair forms the front left and right of a two-channel setup: turntable, network player, or digital source, integrated amplifier or preamplifier + power amplifier combination. The 89 dB anechoic sensitivity makes life easier for modest-power amplifiers, while also accepting more muscular systems up to 220 W.
In home theater, the 720F v2 serves as the front left and right speakers. For a coherent 5.1 or 7.1 setup, Paradigm offers the 620C v2 as the center channel and the 220B v2 or 120B v2 as surrounds. The whole system shares the same AL-MAC tweeter, the same PPA lens, and the same OSW waveguide, for timbral continuity between channels. The extension down to 27 Hz allows full-range operation with a subwoofer as a complement (reinforcement below 30-40 Hz) or without a subwoofer in a moderate-sized room if the 720F v2 serves as the main support for the bass range.
Technical Specifications
General Design
- 3-way floorstanding speaker with 4 drivers, bass-reflex loading
- Integrated technologies: AL-MAC, AL-MAG, Carbon-X, OSW, PPA
- 2nd-order electro-acoustic crossover
- Tweeter / midrange: 1.3 kHz
- Midrange / woofer: 500 Hz
Drivers
- Tweeter
- 25 mm AL-MAC ceramic dome
- Oblate Spherical Waveguide (OSW)
- Perforated Phase-Aligning lens (PPA)
- Damped and cooled with ferrofluid
- Midrange driver
- 152 mm AL-MAG cone
- Perforated Phase-Aligning lens (PPA)
- 50 mm high-temperature multilayer voice coil on a ventilated Apical former
- Woofers
- Two 152 mm one-piece CARBON-X cones with very high excursion
- Active Ridge Technology Gen3 (ART) with vertical mounting system
- 25 mm high-temperature multilayer voice coil on a ventilated Apical former
Acoustic Performance
- On-axis frequency response: ±3 dB from 55 Hz to 23 kHz
- 30° off-axis frequency response: ±3 dB from 55 Hz to 20 kHz
- Low-frequency extension: 27 Hz (DIN)
- Sensitivity
- In-room: 92 dB
- Anechoic: 89 dB
Electrical Characteristics
- Recommended amplifier power: 15 to 220 W
- Maximum input power: 180 W
- Impedance: compatible with 8 ohms
Dimensions and Weight
- Dimensions (H × W × D): 100.6 × 31.8 × 43.2 cm
- Weight per unit: 26 kg
- Available finishes: Gloss Black, Black Walnut, Walnut
Frequently Asked Questions
Where does the 720F v2 sit in the Premier v2 range?
The 720F v2 occupies the mid-level floorstanding position in the Premier v2 series, between the 820F v2 (177 mm woofers, greater internal volume) above it and the 220B v2 and 120B v2 bookshelf monitors below. It incorporates technologies developed by Paradigm for its higher-end series, reworked for this range: AL-MAC ceramic dome, AL-MAG cone, one-piece Carbon-X woofers, PPA lenses, and OSW waveguide.
What amplifier power should you choose for these speakers?
Paradigm recommends a range of 15 to 220 W per channel. The 89 dB sensitivity in an anechoic chamber (92 dB in-room) allows for a 50 to 100 W integrated amplifier for comfortable listening in a medium-sized room. To take advantage of dynamic peaks without approaching saturation, 80 to 150 W remains a good compromise. The 8-ohm compatible impedance suits the vast majority of hi-fi power stages on the market.
Should you plan for a subwoofer with the 720F v2?
The stated extension to 27 Hz (-3 dB DIN) covers almost the entire musical spectrum without external support. For stereo music listening in a 20 to 40 m² room, the speaker is self-sufficient. In home theater, adding a subwoofer remains relevant for the LFE channel (effects below 30 Hz) and to relieve the Carbon-X woofers at high sound pressure levels, whether it is a Paradigm subwoofer or another brand matched to the room.
Are the Outrigger feet mandatory?
The Outrigger Shock-Mount system comes standard with the 720F v2. It widens the floorstander’s support base and mechanically decouples it from the floor via damping inserts. Two sets of tips are included: spikes for carpet or floating floors, rubber tips for solid wood floors and tile. Installing the feet is necessary to achieve the stability and bass performance stated by Paradigm.
Can the 720F v2 be paired with other Premier v2 speakers?
Yes, this is the recommended use for a coherent home theater system. The range includes the 820F v2 (a larger floorstander with 177 mm woofers), the 620C v2 (center channel with passive radiators), the 520LCR v2 (sealed enclosure for wall or furniture placement), and the 220B v2 and 120B v2 bookshelf monitors. Sharing the same AL-MAC tweeter, the same PPA lens, and the same OSW guide across all models guarantees tonal continuity between channels.
- Eco-contribution included in the sale price.
