Vertere Acoustics Pack DGX Sabre Lite black

The DGX Sabre Lite Pack marks a new milestone in the development of turntables within Vertere Acoustics’ Dynamic Groove range. This revamped version draws on forty years of audio design experience and incorporates the latest technical innovations. Supplied with the Groove Runner X tonearm and Sabre Lite MM cartridge, the set is designed to offer a complete solution, suitable for both newcomers to vinyl and more experienced users. It emphasizes ease of use while maintaining a high standard of sound quality.

Technical Evolution and Major Innovations

The DG X is a complete overhaul compared to previous DG-1 and DG-1S models. Vertere’s engineers have redesigned every component: the main bearing now features precision machining with concentricity under 5 microns, while the new drive system includes a programmable microprocessor with a digital-to-analog converter. This technology generates low-distortion sine and cosine waves, amplified by two bridged amplifiers for unprecedented motor control precision.

The suspension has been entirely reworked, as has the three-layer plinth structure, which combines anti-resonance efficiency with refined aesthetics. The new Groove Runner X tonearm uses a five-layer polymer construction with a tri-point articulated bearing system, inspired by the high-end SG-1 turntable. This design eliminates the resonance peaks typical of conventional arms while making removal for transport much easier.

Sound Performance and Fidelity

The turntable excels at retrieving fine details, rhythmic expression, and tonal coherence. Its approach favors faithfulness to the original recording over coloration, delivering a balanced presentation that respects the artist’s intent. Resonance control, achieved through the combination of plinth, suspension, and precision bearing, ensures clear reproduction even in the most complex passages.

The Sabre Lite MM cartridge, specially developed for this package, offers performance close to the more expensive Sabre MM cartridge. Its micro-elliptical diamond and design optimized for the Groove Runner X arm guarantee precise groove tracking and convincing dynamic reproduction.

Easy Setup and Use

One of the DG X’s major strengths is its ease of setup. All critical adjustments (tracking force, azimuth, vertical tracking angle, anti-skate) are made at the factory. The user simply connects the arm (via a micro-USB connector), plugs in the power supply and audio cables, and is ready to go. This plug-and-play approach democratizes access to high-fidelity vinyl without compromising quality.

Speed control is handled via a switch on the plinth: short presses toggle between 33⅓ and 45 rpm, long press for power on/off. The arm features a magnetic rest, eliminating the need for a traditional clip. These practical details make daily use easier while preserving the components.

Complete Package and Accessories

The DGX Sabre Lite Pack includes everything needed for immediate use. The supplied DC-2 30V power supply replaces entry-level wall adapters with a solution dedicated to audio applications. One-meter Black Line interconnect cables provide transmission quality suited to the turntable’s level. The ground wire and 7mm Technomat mat complete the set.

This package approach avoids incompatibilities and optimizes the performance of each component. The user benefits from a coherent system, tested and validated by the manufacturer, without having to navigate between different brands and technical specifications.

Modularity and Upgrade Potential

Unlike traditional turntables, the DG X is designed for upgradability. The Groove Runner X arm can be removed in seconds thanks to its transit screws, allowing it to be replaced with higher-performance models. The cartridge can also be swapped to suit changing tastes or system upgrades. This modularity preserves the initial investment while allowing for targeted upgrades.

The optimized internal wiring system and redesigned connections make these upgrades easy without compromising signal integrity. This approach contrasts with conventional turntables, where any major change often requires a complete replacement.

Technical Specifications

Drive System

• Precision silicone belt drive
• Low-voltage synchronous motor, ultra-quiet
• Electronic control with Vertere microprocessor
• Speeds: 33.3 and 45 rpm with electronic selection

Platter and Bearing

• Machined aluminum platter with PETG mat
• Internal anti-vibration discs: aluminum, cork, neoprene
• High-precision machined stainless steel central spindle
• Brass bearing with tungsten carbide ball

Structure and Chassis

• 3-layer acrylic chassis, resonance-free
• Steel chassis with anti-resonance treatment
• Illuminated central base
• Adjustable feet with isolation

Groove Runner X Tonearm

• Length: 240 mm
• Ultra-precise 3-ball bearing system
• Rigid multi-layer aluminum structure
• Adjustable thread anti-skating
• Adjustable counterweight
• Premium Vertere Pulse wiring
• Smooth lift mechanism and magnetic arm rest
• Removable arm for easy transport and installation

Sabre Lite MM Cartridge

• Recommended tracking force: 2.05 g
• Micro-elliptical diamond tip: 7.5 x 15.5 µm
• Output level: 4.3 mV
• Impedance: 47 kΩ
• Weight: 10.8 g

Power Supply and Connectivity

• Vertere DC2 external power supply: 30 V
• Universal mains input: UK, EU, US, AUS
• Removable and upgradable power cable
• Gold-plated RCA outputs with adjustable shielding
• Configurable ground: signal, chassis, or floating

Dimensions and Finishes

• Dimensions: 469 x 384 x 130 mm with dust cover
• Weight: 8.5 kg
• Tinted acrylic dust cover
• Available finishes: gloss black, white, red

Included Accessories

• DGX turntable
• DC2 power supply
• Sabre Lite MM cartridge
• Standard power cable
• Ground wire
• Technomat 7 mm mat
• Black Line 1 m interconnect cable

General Information

• Precise sound, rich in detail and true to the recording
• Minimal vibration for pure playback
• High-end engineering to reveal every musical nuance
• Elegant design and premium materials
• Modular, upgradable construction: tonearm, cartridge, cables
• Built to last and adapt to future upgrades
• Easy installation: quick setup, ready to use in 15 minutes
• Simple interface, suitable for both beginners and enthusiasts