Taga Harmony PF-2000 (2025) black

The Taga Harmony PF-2000 (2025) is a power conditioner designed for audio and video setups. It combines electrical noise filtering with surge protection. This version includes an analog voltmeter with switchable backlight to monitor mains voltage. The unit features seven Schuko outlets, split between filtered and direct outputs, to suit various types of hi-fi or home theater equipment.

Robust construction and refined finish

The PF-2000 follows a standard hi-fi form factor with dimensions similar to a CD or Blu-ray player (9.6 x 43 x 32 cm). Its metal and aluminum alloy chassis serves a dual purpose: providing shielding against electromagnetic interference and giving the unit appreciable sturdiness. The 5.4 kg weight reflects its serious build quality.

The front panel features a brushed aluminum plate with a clean, professional look. It houses the analog voltmeter, the heart of the user interface, accompanied by a phase indicator and a power switch. The new feature in the 2025 version is the voltmeter’s switchable backlight: it can be enabled as needed, improving readability in low-light environments while adding an aesthetic touch. When activated, this backlight consumes only an additional 0.2 W.

The rear panel groups all connections: seven Schuko outlets, the IEC C13 input for the supplied 1.5 m detachable power cord, and a resettable circuit breaker. This logical layout simplifies wiring and integration into a rack or hi-fi cabinet.

Differentiated filtering and multi-level protection

Household power lines carry their share of disturbances: electromagnetic interference (EMI) generated by refrigerators, air conditioners, computers, or even elevators; voltage variations depending on the time of day or season; and noise from neighboring installations. These invisible pollutions affect audio and video performance by infiltrating device power supplies.

The PF-2000 addresses this with an intelligent distribution of outlets. Five filtered outputs benefit from active signal treatment, removing noise across a wide frequency range (2 to 100 MHz) with attenuation greater than -10 dB. These outlets are particularly well-suited to sources (CD players, Blu-ray players, DACs, streamers), preamps, and other sensitive components that benefit from a power supply free of electrical grime.

The two direct outlets (“direct”), on the other hand, provide an unfiltered connection to the mains. This configuration is judicious for power amplifiers and other equipment with high instantaneous current demands: it preserves their ability to draw current rapidly during demanding musical passages without filtering introducing any limitation.

The protection system operates on multiple fronts. Against surges, the PF-2000 can withstand spikes up to 3000 V and currents of 4500 A in a single impulse. The clamping voltage is 775 V, while energy absorption reaches 125 J (10/1000 µs impulse) or 80 J (over 2 ms). A resettable thermal circuit breaker trips in case of overload, protecting the system from cascading failure. This device can be manually re-engaged after cooling, avoiding fuse replacement.

Phase detection and continuous monitoring

The integrated phase detector is an often-overlooked asset. A red indicator lights up when mains polarity is not respected at the PF-2000’s input. This lets you quickly check wiring and, if necessary, reverse the wall plug or use a specific cable. Correct phase improves grounding and can positively influence sound reproduction in certain setups.

The analog voltmeter continuously monitors mains voltage. Its needles provide immediate, intuitive readings, allowing you to spot seasonal or daily fluctuations at a glance, which are common in rural areas. The LED backlight, added in this 2025 version, enhances the practicality of this visual check. Its additional consumption remains negligible (0.2 W), and it can be turned off if you prefer a more understated front panel.

Flexibility and upgradability

The supplied power cord uses a standard Schuko–IEC C13 connector, and it’s detachable. This opens the door to progressive upgrades: users can replace this cable with a higher-grade model featuring thicker conductors or superior construction without any complex intervention. Taga Harmony also offers its own range of power cables (TPC-TS, STPC-TS) designed to integrate seamlessly with the PF-2000.

The total capacity of 2500 W (10 A) is more than sufficient to power a domestic hi-fi or home theater system including an amplifier, multiple sources, a subwoofer, and a display. The PF-2000’s own consumption remains modest: under 0.5 W at idle (with no device connected), preventing energy waste.

Positioning within the range

The PF-2000 succeeds the PF-1000 v2 and sits below the PC-5000 in Taga Harmony’s lineup. Compared to the PF-1000 v2, it offers one additional filtered outlet (five versus four), a format better suited to standard hi-fi racks, and, according to some reports, a slightly wider soundstage. The PF-1000 v2, with its elongated shape, fits more easily behind furniture but provides a total of eight outlets (four filtered and four direct), versus seven for the PF-2000.

This 2025 version of the PF-2000 retains all the protection and filtering features of earlier versions while adding the voltmeter backlight. Though modest on paper, this detail tangibly improves daily use by making it easier to monitor the mains without turning on ambient lighting.

Technical Specifications

Power Supply and Output

• Supply voltage: 230 V ~ 240 V, 50 / 60 Hz
• Maximum power: 10 A, 2500 W
• Power consumption
  • ≤ 0.5 W with no device connected
  • +0.2 W with backlight enabled

Electrical Protection

• Surge and spike protection
  • Maximum current: 4500 A [8 / 20 µs, single]
  • Maximum voltage: 3000 V [10 mA]
  • Clamping voltage: 775 V [8 / 20 µs]
  • Maximum energy: 125 J [10 / 1000 µs], 80 J [2 ms]
• Overload protection with resettable circuit breaker

Filtering and Conditioning

• Device type: AC power conditioner
• Noise filtering: > -10 dB (2 – 100 MHz)
• Limitation of electromagnetic interference (EMI) from connected devices and external electrical traffic

Outlet Configuration

• 2 direct outlets: for equipment requiring a direct connection to the mains
• 5 filtered outlets: filtering to limit electrical interference

Features

• Analog voltmeter with switchable backlight (2025 version)
• Phase detection: built-in incorrect phase indicator
• Removable Schuko–IEC C13 power cord (1.5 m) for compatibility with audiophile cables

Dimensions and Weight

• Dimensions (H x W x D): 9.6 x 43 x 32 cm
• Weight: 5.4 kg