Triangle S08-C black

The Triangle S08-C is a speaker stand designed for center speakers. It features an extruded aluminum central tube, a high-density wood base, and a three-spike decoupling system with SPEC technology. It stands 45 cm tall and its compartments can be filled to fine-tune stability. The construction aims to reduce vibrations and maintain sonic accuracy.

A stand engineered to neutralize vibrations and preserve sonic clarity

The S08-C is built on a fundamental principle: isolate the speaker from its environment so it reproduces only what it’s meant to. The thick extruded aluminum central tube forms the backbone of the stand, rigid enough to resist flex while presenting a slim profile that won’t catch unwanted waves. This vertical column connects a 35 × 25 cm top plate to a 45 × 42 cm base in high-density wood, a material chosen for its natural inertia that absorbs resonances before they travel back up into the speaker.

The construction includes sealed compartments in the base, designed to hold metal pellets or sand. This filling option radically transforms the stand’s behavior: by increasing its mass, you lower its center of gravity and reduce micro-movements that can color the sound. Triangle provides plastic bags to make the process easier, though metal pellets are sold separately. A stand weighted to 12 or 15 kg won’t react to energetic low frequencies the way an empty 9.5 kg model would.

The decoupling system is the technical heart of the S08-C. Three metal spikes fixed under the base create minimal contact with the floor, limiting the transmission of vibrations from the floor to the speaker and vice versa. The central spike features SPEC technology (Controlled Energy Spike System), a device developed by Triangle that dissipates vibrations in a targeted way rather than simply blocking them. This specific treatment of the central spike creates a preferential path for vibrational energy to exit, much like a lightning rod guides a strike. Protective discs are included for delicate wood or tile floors, offering a less invasive alternative while preserving part of the decoupling effect.

Placement that matters as much as the stand itself

At 45 cm tall, the S08-C positions the speaker’s tweeter roughly at ear level for a listener seated on a standard sofa. This vertical placement directly influences the dispersion of high frequencies, which follow a relatively narrow emission cone. Too low, and a speaker aims its tweeter at your knees; too high, and it projects treble over your head. The S08-C targets the optimal listening point without requiring complex adjustments.

Cable routing at the back of the central tube conceals the connections between amplifier and speakers. This practical detail avoids dangling wires that spoil the neat look of a carefully set up system, especially visible when stands are placed away from the wall. A generously sized speaker cable passes through this channel easily, even with large banana plugs.

Frequently asked questions

Can the S08-C be filled with materials other than metal pellets or sand?

The sealed compartments accept any dense material that can be placed in the supplied bags: hunting shot, steel shot, even dry rice as a stopgap, though it’s less effective because it’s lighter. Avoid organic materials that may mold in humid conditions, and favor fillers that won’t settle over time and create voids that reduce the mass effect.

How much filling should be added to optimize the S08-C’s performance?

It depends on the weight of your speakers and the energy they produce. A rule of thumb suggests the weighted stand should weigh at least as much as the speaker it supports. For an 8 kg speaker, aim for 8 to 10 kg total stand weight (i.e., about 5 kg added to the 9.5 kg empty stand). Heavier speakers or high-volume listening benefit from maximum filling. Start moderately and increase gradually: you’ll hear the midrange gain definition and the bass tighten as the mass becomes sufficient.

Does the cable-routing system accommodate multiple cables at once?

The rear opening of the tube easily handles a standard speaker cable. If you use bi-wiring (two pairs of cables per speaker), the space is generally sufficient as long as the cables aren’t excessively thick. For more complex setups including power cables or digital links to active speakers, test the routing first: the tube diameter limits stacking capacity.

Technical specifications

Dimensions

• Top shelf
  • Width: 350 mm
  • Depth: 250 mm
• Base
  • Width: 450 mm
  • Depth: 420 mm
• Total height without spike: 450 mm
• Packaging box dimensions: 675 x 535 x 170 mm

Weight

• Stand weight: 9.5 kg
• Weight with packaging: 11.5 kg

Construction and materials

• Thick extruded aluminum center tube
• High-density wooden base
• Integrated sealed compartments for adding metal balls or sand to ballast the stand
  • Metal balls sold separately
  • Plastic bags for ballasting included
• Perfectly inert construction to limit unwanted resonances and ensure dialogue intelligibility

Decoupling system

• Base equipped with three metal spikes to decouple the stand from the floor
• Central spike featuring SPEC technology for optimal vibration dissipation
• Protective discs included to safeguard surfaces

Cable management

• Rear cable routing system to conceal cables and integrate the stand harmoniously into the room

Included accessories

• 2 x rubber pads for Magellan Voce 40th
• 2 x base mounting screws with washer
• 2 x top plate mounting screws
• 2 x screw keys
• 2 x protective discs
• 4 x plastic bags for ballasting