Tivoli Model One BT white/silver

In the early 2000s, acoustic engineer Henry Kloss designed in his workshop a table radio that followed in the footsteps of his work from previous decades. This original Model One quickly became a classic of its kind. The BT version keeps its full sonic and aesthetic DNA while adding a Bluetooth connection, allowing wireless playback of music stored on a phone or tablet.

A wooden cabinet in the service of acoustics

The rectangular cabinet with beveled edges is made of MDF with real wood veneer, a material chosen as much for its acoustic properties as for its appearance. This inert construction prevents unwanted vibrations and offers a stable internal volume for the speaker. The veneer grain is matched at the corners for a visually coherent result, and several finish combinations are available to suit different interiors.

The format remains compact: just over 21 cm in width for around 11 cm in height, and a weight close to 1.9 kg. This relative density betrays the quality of the materials used. Placement can be horizontal or vertical depending on the space configuration, bearing in mind that a bass-reflex port located under the chassis contributes to the low-frequency foundation. It is therefore better to leave a bit of space under the unit rather than placing it on a padded surface.

Three knobs, one philosophy

The front panel offers only the essentials: a speaker protected by a metal grille and three rotary knobs. The upper left knob combines power and source selection (AM, FM, auxiliary input, or Bluetooth). The second controls the volume. The third, noticeably larger, is used for radio tuning.

The latter deserves a closer look. Its mechanism operates with a 5:1 reduction ratio, which means that a full turn of the knob moves the needle by only a fifth of the frequency band. This deliberate slowness allows for fine, station-by-station adjustment and recreates the ritual of radio listening as it was practiced before the advent of digital presets. The feel is smooth, with no play or excessive resistance. The visual indicators on each knob remain discreet yet readable.

A high-sensitivity analog tuner

The FM reception circuit is based on a discrete-component architecture incorporating GaAs MES-FET transistors, a technology derived from mobile telephony that improves selectivity and sensitivity. In practice, the radio picks up weak or distant stations that other devices struggle to lock onto and maintains a clean signal even when several transmitters occupy neighboring frequencies. The AM band is also present, which can be useful in regions where certain local or news stations still broadcast on these waves.

The telescopic antenna, discreetly located at the rear, is generally sufficient for urban areas. For more challenging situations, a socket allows you to connect an external FM antenna.

A deliberately mono sound reproduction

The 76 mm (3-inch) full-range driver uses a heavy magnet and long-throw suspension. This technical choice allows for significant cone excursion, which results in more generous bass response than the size of the cabinet would suggest. A frequency correction circuit automatically adjusts the response curve in half-octave steps, balancing the rendering of voices, instruments, and bass according to the content being played.

The decision to go mono, often perceived as a limitation, is actually a deliberate technical choice: rather than multiplying small-diameter drivers to simulate a stereo effect that is often artificial at such a small scale, Tivoli Audio favors a single, good-quality speaker. The result sounds confident and coherent, voices remain intelligible at low volume, and the music retains body when you turn the level up. The rated power of 25 watts is more than sufficient for a medium-sized room.

Bluetooth to broaden how you use it

The addition of Bluetooth (version 2.1+EDR with A2DP profile) allows wireless music playback from a compatible smartphone, tablet, or computer. Pairing is done via a button located on the back: a long press activates discovery mode, and the unit then appears in the list of available devices on the source device. The connection is stable within a range of about ten meters without major obstacles.

This feature turns the radio into an auxiliary speaker for listening to podcasts, streaming services, or simply the audio track of a video. Sound quality via Bluetooth is slightly superior to that of FM radio, as the digital signal is free from the interference inherent to over-the-air broadcasting. Note, however, that Bluetooth works only as a receiver: it is not possible to send the radio’s sound to a wireless headset, for example.

Connectivity and power supply

The rear panel brings together several recessed sockets in a reinforced area. In addition to the FM antenna input and the Bluetooth pairing button, there is a 3.5 mm mini-jack auxiliary input for connecting a CD player, portable music player, or any other wired audio source. A headphone output, also in mini-jack format, automatically mutes the speaker when headphones are plugged in, allowing private listening without disturbing others.

Power is supplied via an external AC adapter whose cable measures around 1.70 m, providing some flexibility in positioning the unit. No battery is built in: the Model One BT is designed for fixed installation rather than mobile use.

Technical specifications

Construction and design

• Furniture-grade wooden cabinet, optimized for natural acoustic reproduction
• Iconic Tivoli Audio design, inspired by classic analog radios
• Balanced front panel layout with front-facing controls
• Multiple finishes available depending on the collection

Audio performance

• Full-range driver optimized for clear and balanced sound reproduction
• Tivoli Audio sound signature: rich, precise, and warm sound
• Excellent radio reception quality
• Suitable for near-field listening: bedroom, office, kitchen, living room

Controls and interface

• Analog rotary knobs for intuitive use
  • Volume control
  • Radio search and tuning
• Simple, immediate operation with no complex interface

Connectivity and playback

• Built-in Bluetooth for wireless streaming from smartphone, tablet, or computer
• Integrated radio function
• Mains power supply: no battery, no recharging required

Dimensions and weight

• Dimensions: 11.43 × 21.27 × 13.34 cm
• Weight: 1.88 kg

Box contents

• Model One BT Bluetooth radio
• Power cable
• User documentation