France
EN
Contact
Account
Quote
Basket

ArtSound MDC6.2 black (pack of 2)

Finish : Black
  • Black
  • White
€109
Available on order
Delivery on June 13, 2026 (from €8.90)
Fast delivery: on June 11, 2026
Notify me when it's back in stock
Protect your product
+€20
Extended warranty to 5 years +
Accidental damage cover for 3 yearsWhat are the benefits?

Overview

Hard to combine discreet sound reinforcement with demanding environments. ArtSound’s MDC6.2 meets this challenge with a flush-mount speaker boasting IP66 certification, capable of operating just as well under a weather‑exposed veranda as in a steam‑saturated hammam. This revised version of the MDC6 gains 3 dB of sensitivity and adopts a dedicated dome tweeter for more precise high‑frequency reproduction.

A design built for extreme conditions

The MDC6.2’s enclosure is molded in one piece from ABS, a technique that eliminates junction points where moisture could seep in. The front grille in corrosion‑treated aluminum protects the drivers while maintaining a refined look, available in white or black depending on the desired integration.

The IP66 rating guarantees complete sealing: the first digit (6) indicates full protection against dust, the second (6) resistance to powerful water jets. In practice, the speaker withstands direct exposure to rain, salty sea spray, or splashes from a swimming pool. The specified operating range extends from −20 °C to +105 °C, covering both winter frost and the temperatures reached in a sauna.

Two complementary drivers

The 5.25‑inch (133 mm) woofer uses a polypropylene cone reinforced with mica particles. This composite improves cone rigidity without adding weight to the diaphragm, limiting distortion and ensuring stable behavior regardless of ambient humidity.

The 13 mm PEI (polyetherimide) dome tweeter with neodymium magnet takes over for the upper part of the spectrum. Compared to the original MDC6’s dual‑cone system, this dedicated tweeter delivers more even dispersion and better definition on voices and acoustic instruments.

The 89 dB sensitivity (±2 dB at 1 W/1 m) allows for a comfortable sound level with modest amplification. ArtSound recommends between 10 and 50 W per channel into an 8 Ω load.

Frequency response and natural limits

The frequency range extends from 100 Hz to 20 kHz. This 100 Hz low‑end limit clearly positions the MDC6.2 as a satellite speaker: mids and highs are reproduced with clarity, but deep bass is not on the menu. For background music on a terrace or ambient sound in a spa, this behavior is perfectly adequate. For more critical music listening or a full home‑cinema setup, adding a subwoofer will be beneficial.

The recommended coverage of 40 m² corresponds to stereo diffusion with two speakers. In a larger or highly absorbent space (textile furnishings, vegetation), adding extra pairs will maintain consistent sound pressure.

Usage environments

The MDC6.2 naturally finds its place in damp or exposed areas: bathrooms, indoor pools, covered patios, verandas, and pool houses. Its marine compatibility makes it a credible option for installations on boats or along the coastline, where salt accelerates corrosion of conventional equipment.

For standard indoor use (living room, open kitchen), speakers from ArtSound’s Happi or X-tended range will often be preferable: their non‑sealed design allows for a wider frequency response and generally lower pricing. The MDC6.2 remains relevant if the environment presents a risk of moisture, even occasional.

Technical specifications

Electrical and acoustic specifications

  • Recommended power: 10–50 W
  • Sensitivity: 89 dB (±2 dB) – 1 W / 1 m
  • Impedance: 8 Ω
  • Frequency range: 100 Hz–20 kHz

Environmental specifications

  • Recommended coverage area: < 40 m²
  • Operating temperature: -20 °C to +105 °C
  • Protection rating: IP66 (waterproof and dustproof)
  • Frost-resistant: Yes
  • Suitable for marine environments: Yes

Loudspeakers

  • Woofer: 5.25 inches (133 mm) mica-reinforced polypropylene
  • Tweeter: 0.5 inch (13 mm) PEI dome with neodymium magnet
  • System: 2-way with voice coil

Construction and finish

  • Materials: ABS / aluminum
  • Grille: Corrosion-resistant aluminum
  • Available colors: White / Black
  • Weight: 0.46 kg per unit

Dimensions

  • Overall dimensions (Ø x depth): 152 x 48 mm
  • Cutout diameter: 112 mm

Key features

  • Clear, balanced sound
  • Resistant to humidity, salt, and harsh weather conditions
  • Modern design with aluminum grille
  • Simple flush-mount installation
  • Suitable for both indoor and outdoor environments
  • Ideal for coastal areas and wellness spaces

Frequently Asked Questions

Can the MDC6.2 be installed directly in the rain, without shelter?

Yes. The IP66 certification and hermetic construction allow direct exposure to precipitation. The aluminum grille and hydrophobic drivers are not affected by water or temperature variations. However, prolonged immersion or installation below the waterline of a swimming pool is not intended.

What type of amplifier should be used?

A stereo or multichannel amplifier delivering between 10 and 50 W per channel into 8 Ω is suitable. Conventional hi‑fi amplifiers, home‑cinema receivers, or installation amplifiers (residential or 100 V with suitable transformer) will all work, provided the impedance is respected.

Can the MDC6.2 be painted to blend into the ceiling?

The aluminum grille can be spray‑painted with a metal‑compatible paint, after light sanding and application of a primer. The ABS frame also accepts paint. Avoid blocking the grille perforations, which would degrade sound dispersion.

What is the difference compared with the original MDC6?

The MDC6.2 benefits from increased sensitivity (89 dB versus 86 dB), a dedicated PEI dome tweeter instead of a dual‑cone system, and a slightly extended frequency response (100 Hz versus 102 Hz). The cutout diameter changes from 125–130 mm to 112 mm, making installation easier in tighter spaces.

Is a subwoofer necessary for music listening?

For ambient sound (background music, podcasts, radio), the MDC6.2 is sufficient. If you want to reproduce deep bass (electronic music, movie soundtracks), adding an active subwoofer will significantly improve the overall sound.

How many speakers should be planned for a 60 m² terrace?

The specified coverage of 40 m² corresponds to one stereo pair. For 60 m², two pairs positioned to cover the entire area will ensure even sound distribution. A four‑channel amplifier or a speaker selector will simplify wiring.

Is the speaker suitable for seaside use?

Yes, marine compatibility is explicitly confirmed by ArtSound. The materials are resistant to salt and sea air. Occasional rinsing with fresh water will extend the grille’s lifespan in the most exposed environments.

  • Eco-contribution included in the sale price.
  • GTIN / EAN: 5420020107285
Easy & secure payment
4x payment with no fees
VisaMasterCardCarte BancaireAmerican ExpressApple PayGoogle PayBank transferBilliePayPal3× interest-free with Alma4× interest-free with Alma
24–72h delivery in France
34,700 products in stock
Express, standard or collection point
Standard deliveryExpress deliveryColissimo pickup pointChronopost pickup pointIn-store collection
4.8 / 5
28,624 verified customer reviews
190,000 satisfied customers
Passionate experts since 2001
Showroom near Paris
430 products available for demo
6 auditoriums + 8 demo areas
HomeCineSolutions
Loading