Denon AVR-X4200W black

Main Features

• 7.2 channel AV surround receiver with 200 watts per channel
• 9.2 channel processing, 13.2 channel pre-outs
• Built-in Wi-Fi with dual antenna, built-in Bluetooth
• 4K/60Hz pass-through and 4:4:4 resolution, HDR, BT.2020
• Upscaling of digital and analog video signals up to 4K 60/50Hz
• Eight HDMI inputs (including one on front) and three HDMI outputs
• Dolby Atmos up to 5.1.4 or 7.1.2 (with additional 2 channel amplifier)
• DTS:X support (via firmware update)
• Auro-3D, Auromatic (up to 9.1 channels, paid upgrade)
• Audyssey MultEQ XT32 (Pro ready), Sub EQ and LFC
• High resolution audio streaming of DSD, FLAC, ALAC and AIFF
• AirPlay, Spotify Connect and Internet radio
• Three zones/three sources
• Front panel USB input

Immerse yourself in the enveloping 3D surround sound of the Denon AVR-X4200W AV surround receiver, with Dolby Atmos surround decoding and DTS:X (via a firmware update in late 2015) for the ultimate home theater experience. Denon’s renowned AL24 Processing Plus refines all audio signals, aided by high quality 192kHz/32-bit digital-to-analog converters.

Wireless connectivity is provided by Wi-Fi and Bluetooth. Stream your favorite tracks from Internet radio stations, Spotify Connect or local network storage players (NAS), or use AirPlay or Bluetooth for streaming directly from a smart device.

Enjoy 4K Ultra HD video (with HDCP 2.2 support), even from low resolution sources, thanks to the advanced video processor with upscaling capability. With its nine channel processing capability, eleven speaker terminals and 13.2 channel pre-outs, the AVR-X4200W offers flexibility in your amplification choices.

• Number of power amplifiers: 7
• Output power:
  • 200 W per channel (into 6 Ω, at 1 kHz, 1% THD, mono channel)
  • 165 W per channel (into 6 Ω, at 1 kHz, 0.7% THD, two channels)
  • 125 W per channel (into 8 Ω, from 20 Hz to 20 kHz, 0.08% THD, two channels)
• Speaker impedance: 4 - 16 Ω
• D.D.S.C.-HD Digital and AL24 Processing Plus, Denon Link HD
• Audyssey Dynamic Volume for real-time volume adjustment
• Audyssey DynamicEQ for optimized surround effects at low volumes
• High-quality audio components
• 192 kHz/32-bit digital-to-analog converters
• Multi-source/multi-room
• Digital transmission for iPod and iPhone (via USB)
• Configurations adapted for installation without subwoofer
• Jitter reducer

Preamplifier Section

• Input sensitivity/impedance: 200 mV/47 kohms
• Frequency response: 10 Hz – 100 kHz – +1, – 3 dB (DIRECT mode)
• Signal-to-noise ratio: 102 dB (IHF-A weighted, DIRECT mode)

Connectivity

Inputs

• 8x HDMI input (1 front)
• 2x Component
• 4x Composite (video)
• 5x Analog audio
• 2x Digital optical
• 2x Digital coaxial
• 1x Phono (MM)
• 1x USB (front)

Outputs

• 3x HDMI monitor output
• 1x Component
• 1x Composite (video)
• Zone2 / Zone3 Preout 2.0 ch
• 13.2 channel audio pre-out (subwoofer x2)
• 1x Headphone

Other

• 1x Ethernet
• 1x RS-232C
• 1x Microphone port
• 1x FM tuner antenna
• 1x AM tuner antenna

Tuner Section

• FM: Tuning frequency range 87.5 - 108 MHz
• AM: Tuning frequency range 522 kHz – 1611 kHz

General

• Power supply: AC 230 V, 50 Hz
• Power consumption: 670 W (standby 0.1 W, CEC standby 0.5 W)
• Power consumption: 55 W (ECO mode on)
• No sound output: 85 W (ECO mode off)
• Dimensions (W x H x D): 434 x 167 x 389 mm
• Weight: 12.6 kg